Тёмный

Repair DAMAGED Hydraulic Cylinder Barrels | Hitachi Zaxis 670 Excavator Part 2 

Cutting Edge Engineering Australia
Подписаться 825 тыс.
Просмотров 1,1 млн
50% 1

Опубликовано:

 

27 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1,6 тыс.   
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
We finally got our hands on the material to get these cylinder barrels completed! Thanks for waiting & supporting the videos we hope you enjoyed this job 😎👍 Here's part 1 Making the pistons if you missed it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gxIQoaakg1o.html Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au
@michaelvangundy226
@michaelvangundy226 3 года назад
Maybe you have already addressed this, but why if you need to make a new piston. Why not bore the tube oversize and make an oversized piston to match?
@hicham1101
@hicham1101 3 года назад
Very nice job brother.
@jetranger47
@jetranger47 3 года назад
You make it all look so easy and simple... but then experts like yourself usually do!
@ShotgunAU
@ShotgunAU 3 года назад
Legit as always, also, are you guys getting any more caps in stock soon?
@explorationuk6737
@explorationuk6737 3 года назад
Curtis dude do you post pics for chip of the week ....if not chat to Adam booth about it abom79... Peace n love from Cumbria UK 🇬🇧 ❤
@justaddwata
@justaddwata 3 года назад
As much as I can appreciate the machining and welding skills of Kurtis - I have to say I am impressed at how Karen is able to capture the angles and moments (sizzle of the chips, newly installed wire leaving the gun, etc). Certainly nothing amateur there. I think we may need to hear about Karen's story one of these episodes?? Awesome video once more - great team effort!!
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Hi Matt! Thank you for watching the video. I appreciate that & great to know the editing is enjoyed by so many. I would consider myself an amateur in that I have had no professional experience or training with the video or editing, 100% self taught! I have always enjoyed photography and editing is the creative outlet for my very analytical accounting side of my brain 🤣 Karen aka giggles 😄
@DaleDix
@DaleDix 3 года назад
Sizzling chips. Nice
@ypaulbrown
@ypaulbrown 3 года назад
@@CuttingEdgeEngineering Karen, I have always admired your camera work and editing, you have the right amount of slow motion, fast motion and normal speed I n your edits to nicely convey what is going on with out becoming boring. Your camera work is totally amazing, I wish our camera guy would watch some of your work for the RU-vid videos I am now involved with.....Amateur means you do it for the Love of it, Professional means doing it for the Money.......You are a natural talent when it come to to this medium. As a former Advertising/Industrial photographer for major companies here in the States and also doing video and multimedia shows for over 25 years...I have seen and done alot of work in the visual fields......Your work is top notch.......Kurtis is one lucky Man to have you as his Wife, Partner, Videographer, and all around Happy Person......Wishing you , Kurtis and all the rest of your family all the Best in all your endeavors.......Cheers from the States and Hats off for a wonderful job you do........by the way, Giggles is a great Moniker.....never stop, it is what makes your videos so wonderful to watch, and of course Homeless is always a Star, Oscar for Best Supporting Actor in my humble opinion.....Your Truly, Paul
@Stepinup
@Stepinup 3 года назад
@@DaleDix ahh yes the sizzling chips .that was brilliant 👏 👌
@lancecluster
@lancecluster 3 года назад
@@CuttingEdgeEngineering You do a great job on these videos. A lot of other much more established RU-vid channels pale in comparison to your production quality, both the video and the often overlooked audio are first class. Of course the giggles and Homey also add a lot.
@outbackladas
@outbackladas 3 года назад
Fully agree with the sentiments expressed by others regarding the quality of the editing, a really professional top job 👍. For someone that claims to be a self taught amateur you are producing a really good video, great teamwork !
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
thank you very much 😊
@dans_Learning_Curve
@dans_Learning_Curve 3 года назад
@@CuttingEdgeEngineering sometime it would be fun to hear how you got your experience! I'm always up for a story!
@madbhagwatmahapurandevkina1943
@madbhagwatmahapurandevkina1943 3 года назад
Iam also with you ji uttam Kumar sharma Mumbai India
@renerosentraeger
@renerosentraeger 3 года назад
Absolutely agree 😁👍👍
@tonythompson9049
@tonythompson9049 2 года назад
I agree 100 percent also professionally done awesome jobs he does an he should be left to do any job The way he chooses instead of everyone wanting him to change an do it there way curtis does an awesome job he takes pride in his work cause he knows that is what keeps the lights on an Bill's paid
@Spookieham
@Spookieham 3 года назад
"spray the living shit out of it" - I love it when real-life engineering terms are used. Another cracking video👍
@LawlzWords
@LawlzWords 3 года назад
That line had me laughing pretty hard 🤣🤣
@arisaka9963
@arisaka9963 3 года назад
I had always heard it said as “spray the dogshit outta it”
@mikeworkman3593
@mikeworkman3593 3 года назад
Or 'Cunt Hair", LOL, very technical term!!!
@dennisonseeto
@dennisonseeto 3 года назад
That's a technical Aussie engineering term right there! ❤
@twothreebravo
@twothreebravo 3 года назад
Must be one of those metric measurements my American brain isn't calibrated for.
@nv1493
@nv1493 3 года назад
I hope you don't change your winning formula: - clear explanations - no drama, no BS - excellent videos - liberal doses of Safety Officer
@gorillaau
@gorillaau 3 года назад
- plenty of out takes with Giggles aka Karen
@sarsoar
@sarsoar 2 года назад
@@gorillaau creep
@JamesMcCutcheon
@JamesMcCutcheon 2 года назад
My dad was a machinist, he never taught me one thing but I watched him in our home machine shop to turn, weld, and to watch him repair things. He died when I was 12 years. I still remember the smells of burning cutting oil, welding rods burning, and the sound of the lathe turning and the sound of the cutting tools against the different metals. Later in life, I became a Quality Engineer for GE doing tests on copper and steel and brazing with GAS and also Induction heating tools. I also like the big equipment repairs. I was fascinated with large road equipment as a kid. Thanks to you and your wife for the channel. The doggy is precious and keeps me looking for more. The only bad part I remember is my dad and grandad were outside welding a frame for a dump mixer. They said don't watch, so I got back a distance and watched from the tree. I went to bed that night and my eyes were welder burned, mom put raw potato mash on my eyes. I hope the Doggie does not look at the welding.
@kengell
@kengell 3 года назад
Another great episode guys. Karen’s cinematography skills improving and dare we say artistic. Homeless’ appearances greatly loved by my Mrs and grand daughter. The actor playing Kurtis needs to practice his lines but the quality of work is top shelf. Thanks
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
i'm a man of few words 🤣 much prefer to get in and get it done lol Thanks for watching mate and the great comment
@randytravis3998
@randytravis3998 3 года назад
the actor ,, had me rolling on the floor laughing ,, back of my mind I can hear Beep beeping beep and a few more beeps ,, great comment ,,
@ronwilken5219
@ronwilken5219 2 года назад
@@CuttingEdgeEngineering and we all know what most of IT is. Thanks for being able to take a joke even if it is a dig. At least his hat's on straight-ish. Regards from Canada's banana belt. 👍🇨🇦🍌🥋🕊️🇺🇦🐨🇦🇺😂😂😂
@billcaseful
@billcaseful 2 года назад
Kurtis the instructor was front and center today, and I really appreciated your explaining what and why you’re doing things the way you do. Thank you for taking the time.
@humancattoy7767
@humancattoy7767 3 года назад
When you have a system that works, then that's what makes you more efficient. For those who have worked in an industrial environment, we fully understand. For the rest, well, watch and learn, Grasshopper.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Right on mate 😎👊
@Anonymous-it5jw
@Anonymous-it5jw 2 года назад
It's a first class operation from the videoing, to the editing, to helping Kurtis give his professional narration of how and why he approaches each job, always with the client's need to get their equipment repaired quickly and expertly and back into service ASAP, and the video presentation of Kurt's encyclopedic knowledge of repair work in action, his ability to make any tools or accessories he needs, and his ability to acquire and utilize pre-owned high-quality machinery that enables him to take on and complete jobs that require having those tools available to meet his client's needs. Notice that he respects the privacy of the name and work location of each client, and uses generic pictures of machines he works on, to help viewers understand what he is doing and the importance of a proper repair to the future trouble-free operation of each piece of equipment he works on. And all under the watchful eye of his Safety Director, who apparently thrives on a steady diet of plastic creatures not found in nature on this planet. Thanks guys, for showing the world how this type of work can be accomplished with precision and speed, if you have the knowledge required for the work, the drive to make your business succeed, the perfect location for getting it done, and marry a highly skilled videographer and editor who can show people what you do and the money your clients likely save by hiring you to solve problems that dealers and others aren't able to deal with effectively or in a way that helps clients keep equipment essential to their businesses running continually.
@davidhall8874
@davidhall8874 3 года назад
As I watch pt. 2, I want to say how much I am impressed with your professionalism; your work ethic, always wanting to give your customers the very best job and your attention to detail. I also appreciate how you treat the viewers as colleagues instead of ignorant onlookers. But mostly I enjoy your use of professional language. Some refer to it as auto mechanics language. Sailors may well have invented its use, but it has been adapted very well for the working man and you certainly are a working man. Congratulations on the success of your business as well as your RU-vid channel. A special thank you to Giggly for diligence in camera work and editing skills. You both make a great team!!!
@gustavcrossbow2805
@gustavcrossbow2805 2 года назад
did he maxhine the interior ir it came machined to size
@jonnywilson9117
@jonnywilson9117 2 года назад
@@gustavcrossbow2805 What question are you asking/what statement are you making?
@ronwilken5219
@ronwilken5219 2 года назад
@@gustavcrossbow2805 he told you at the beginning. They couldn't get the material they wanted so they had the supplier custom bore and hone the tube to the required internal diameter. The outside doesn't really matter but he'll turn bands where clamps need to be so that it'll fit back on the machine.
@cranefly23
@cranefly23 3 года назад
Curling up with a mug of tea to watch this got my Friday morning off to a brilliant start. “I watch for a little puff of smoke to let me know when I’m nearing the ID”. All very scientific and technical! 🤣 It’s little things like this that go a long way to show just what your vast experience has taught you. I would also like to add my appreciation to Karen for her excellent camera and editing skills, along with the many other similar comments. Thanks, guys. 👍
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Hey Perry sounds like a great start to Friday hope the rest of your day is a great one! Cheers mate we appreciate the comment
@rohmen6
@rohmen6 3 года назад
Thanks so much for making these videos - as a frustrated software guy, I love watching you make steel "dance" - do exactly the right thing. Things I really loved about this video: 1) As always, terrific camera work and editing. 2) The serious but playful work/play relationship the two of you share. 3) The explanation of the button tool - why you use them - "they take abuse". 4) When you do / do not use coolant, and why. "so I can see the puff of smoke of hydraulic fluid" 5) Getting the heavy flange stuck on the floor!! 6) Explanation of the size of the heat crush / expand machining dimension, 7) Welding heat shrink, and what you had to do to fix that. Gotta suck getting surprised by stuff like that, but it does show how hard your work is. 8) Explanation of why you didn't use the big honing machine to fix the end. "Won't fit in the machine, and can't do 1/2 and 1/2. Won't line up and be parallel." As always, keep up the good work, and I can't wait to see the next one.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
hey mate a good summary there thanks for taking time to watch and share your feedback!
@timothyball3144
@timothyball3144 3 года назад
Near the end when you said, "let's see how fast we can get this lined out", then showed you picking the barrel off the pallet, I expected you to go out of frame, then cut to immediately coming back in with the finished barrel. But that worked too. You showed all of the detail on the first one, then the big picture on the second one. I have never seen you method of wrapping the strap around the fork. My guess is that is to keep it from slipping. I also caught where you marked the strap position after setting it on the lathe. Little things like that save time and possible problems. You are right about the anxiety level when installing bushings with liquid nitrogen. Clean, check, double check, plan your moves, practice your moves, check for tools handy, have plan in place for if things don't go right. Then DEEP breath and go for it.
@fw1421
@fw1421 3 года назад
One thing I have to say is that Curtis is very professional and takes pride in his work. One hell of a machinist.👍🏻👍🏻👍🏻
@thisolesignguy2733
@thisolesignguy2733 3 года назад
My dad was a machinist for over 60 years, I watched him parting off cylinder heads one time...He literally set the machine, sat on a chair and took a nap. the minute it made the sound it reached the ID, he snapped awake and grabbed the lever. He did this 8 times in a row...That's how you recognize a machinist that's got TONS of years of experience. He could recognize any sound on the machine just by walking next to it, and he used to tell the younger guys how to fix it. He worked for a aviation manufacturer and could machine parts done to the millionth of an inch on a lathe that was built in the 1940s. I'll never forget that.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
what a legend!
@thisolesignguy2733
@thisolesignguy2733 3 года назад
@@CuttingEdgeEngineering That he is, He's still going strong but since he retired he just helps teach the newbies at the shop. But even at nearly 70yrs old, he can still hold a 50lb die in one hand and beat it with a 10 sledge with the other. :)
@FarmCraft101
@FarmCraft101 3 года назад
Great video. I was hoping for an elapsed time on the second rebarrel when he said "Let's see how fast I can do this." How long did it take start to finish?
@ypaulbrown
@ypaulbrown 3 года назад
Mr. Kurtis, or Our Mentor from Queensland, the added dialogue about why you are doing things a certain way are rally appreciated.....I will never be doing this sort of job, but it's so nice to see your reasoning, and it makes 100% safe, smart and efficient use of time.....Bravo, cheers from the States, Paul B....hope you ar enjoying the wonderful Spring Time weather, we are at the same latitude as you here in the Northern Hemisphere, our weather is just like yours, and of course, many plants and trees are very similar here in Florida......My one month spent in Brisbane , Queensland in November of 94' was very similar to here, until I got out to Blackwater, and then the Cattle Station out past Alpha where I worked for a few weeks during the Spring Muster......The mines I visited in Blackwater were really amazing....and the Equipment was so great to see in action.......if you have never ben out there, you should go, we were lucky enough to get a 3 hour tour that they run once a week.....check it out......now, back to the show.......🦾🍕🍿🕢📽🎬🗜⚙🔩
@markmathy1749
@markmathy1749 3 года назад
While I really enjoy watching your skill, what I am most impressed with is how well you two get along. My wife and I worked together for several years and I know it can sometimes be challenging. We still do all types of projects together and I love how we don’t get tired of each other. 28 years and counting. Thanks for the videos.
@mikeworkman3593
@mikeworkman3593 3 года назад
The extra work just to make it aesthetically pleasing by not having 2 extra bands on the tube, this is called attention to detail and keeps the customers happy and coming back!!
@assessor1276
@assessor1276 3 года назад
The arsenal of equipment you have and the range of skills you possess never ceases to amaze me. Keep up the good work!
@michaelkunzler9705
@michaelkunzler9705 2 года назад
Hi, I live in Louisiana U.S.A. I sure do love watching you. Cutting Edge and Abom79 are my two favored shows. I am not a machinist but love watching the machine work. I worked all my life on offshore drilling rigs and have been all over the world. One thing I know from watching you is that you are very good at what you do. Thank you for sharing your work.
@daviduher6219
@daviduher6219 3 года назад
Curtis, I am really appreciating your more detailed explanations about the repairs needed, the why and how of the techniques, and even the info on the materials. You are doing a really great job with your content! Thanks so much to you and your camera person and editor.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
cheers mate for the great feedback!
@ValiRossi
@ValiRossi 2 года назад
I have many years of experience in automated welding systems. MIG, TIG, Plasma, Laser, Friction, Resistance, Spot, Stud, etc. That weld you laid down was beautiful!
@ChrisSherlock
@ChrisSherlock 3 года назад
Good on yer Kurtis, you had the answers ready before I'd even finished thinking of the questions. Great explanations.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
haha yeah Karen is pretty intuitive with what viewers might ask and asks me the same questions
@macgiver6969
@macgiver6969 2 года назад
I work in a job shop in Fla. I’m used to doing large repair. We have an old 30” swing 20’ lath pre 1920 but works well. 200t press with full weld dept and machine shop. We’re not that big but do amazing thing through our resourcefulness and brainstorming. Learned much watching your videos. I know you’re too busy to respond to this but thank you for your videos
@buyamerican3191
@buyamerican3191 3 года назад
Another great CEE video! How could 11 people dislike this? Someone mentioned this before but the video content is always great, proper angles on the camera etc. I'm sure there is quite a bit of editing but the finished product is always fantastic! Keep up the good work! It would be a day without sunshine if I couldn't watch your work!
@cfs3428
@cfs3428 3 года назад
yeah and not even any kind of clickbaiting necessary on these videos.
@markfryer9880
@markfryer9880 3 года назад
54 of the rude Thumbs Down bastards by Saturday night and 202K views.
@buyamerican3191
@buyamerican3191 3 года назад
I guess I can understand if somebody didn't like the content but then they just shouldn't watch it. Why give it a thumbs down?
@StevenStyczinski-sy8cj
@StevenStyczinski-sy8cj 3 месяца назад
I live in California, USA; and I anxiously wait for your next post in the middle of my night every week. So some machinists say never do this or that and others say always do this or that! But you seem to “do it your way” when you believe it is the best way (under your current situation) to “do it that way”. There is no such thing as “always or never” for an intelligent person! THUMBS UP
@JohnBare747
@JohnBare747 3 года назад
I love that Homeless is opening the mail now, one less job to add to the internal stress level and makes him earn his chew toy, not that it seems to be a chore for him he enjoyed ripping open that bag.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
haha yeah he now thinks all the mail is for him so best start doing some office work! 🤣
@markfryer9880
@markfryer9880 3 года назад
Damn efficient at opening that mail bag.
@ggaret11
@ggaret11 2 года назад
Вот ничего не понимаю в металлообработке и сварке-но канал смотрю с огромным удовольствием!!!Просто красавчик!Респект!!!
@just.some.dud3
@just.some.dud3 3 года назад
Ah yes, my weekly education from Kurtis and crew. Cheers to you and Karen for sharing your skills, knowledge and workmanship with us all!
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
always welcome mate thanks for watching
@Francis59flq
@Francis59flq 3 года назад
Quelle technicité !!! je n'ai jamais vu quelque chose de semblable chapeau monsieur vous étes un GRAND !!!
@z4nadeesh
@z4nadeesh 3 года назад
Just came home after work and I see this on my feed! Love your work team. Hello from Albany Creek ❤️
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Hey mate thanks for supporting the video we appreciate it
@hfdzl
@hfdzl 3 года назад
G'day! Kurtis , I want to thank you profusely for your machining skill and willingness to share your knowledge. I rebuilt 2 vintage 1945 bulldozer lift pistons and replaced the chrome rods. Thanks to you. Herb in USA
@melfallen6673
@melfallen6673 3 года назад
“So, that was quicker than cutting it with a saw.” 😂Spot on, mate - i literally cheered & saluted!🤣 Be safe & be well, Kurtis, Karen and Homey!!! 👍😃🙏🏻✊🇺🇸🍌
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
haha cheers mate definitely had to mention that 🤣👍
@dans_Learning_Curve
@dans_Learning_Curve 3 года назад
@@CuttingEdgeEngineering y "You still should have used a saw!", Said the armchair machinist! LoL 🤣😆
@Peter-gi3re
@Peter-gi3re 2 года назад
Absolutely frigging brilliant workmanship by Kurtis and video work by Karen and supervisor Homey big jaws.
@Mates15864
@Mates15864 3 года назад
The most skilled engineer I've ever seen! All work is always perfect.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
thank you
@kellyblack4897
@kellyblack4897 2 года назад
As a former CNC machinist who came up from Brown and Sharpe single Odd, I enjoyed when you explained the lack of coolant. Some rare jobs coolant is a bad idea, and tooling +/- speed is everything. Well done!
@traxxasman417
@traxxasman417 3 года назад
Everytime you get an outake the look of defeat/ blank stare on Kurtis' face cracks me up.
@rubbertrucker1363
@rubbertrucker1363 3 года назад
i love the way you explain the reason a job is done the way you do it im not a machinist but how you explain things and dont talk down to those of use not in the trades is what keeps me coming back to your channel. keep up the great job. ill keep watching from northern manitoba canada. and yes its getting cold and everthing is freezing
@mariomartin1756
@mariomartin1756 3 года назад
Se me estaba haciendo tarde , para ver la segunda parte , gracias por estos vídeos desde TENERIFE ( Islas Canarias)
@bluegliderguy1
@bluegliderguy1 3 года назад
As a non-machineist I appreciate the expalinations of the whys and hows. Thanks much!
@timlarcombe6831
@timlarcombe6831 3 года назад
Mate, I know exactly what you mean when talking about liquid nitrogen, particularly with with big expensive OEM bushes and bearings, you feel a bit like Neil Armstrong's landing on the moon during the final minutes of decent because you only have one shot at it, and this is after 35 years doing it, fantastic work by both of you, what a Team, long may reign, cheers
@FinnoUgricMachining
@FinnoUgricMachining 3 года назад
Tim, shrink fitting is not for faint hearted. With large object You have a little bit more playroom there but that is still very exciting. Kurtis uses a thermometer to be absolutely sure to have enough expansion in there. A 200 millimetre steel ring grows about 0,2 millimetres for each 100 degrees Celsius. This is assuming that the thremal coefficient of the material is 10ppm.
@ToreDL87
@ToreDL87 2 года назад
@@FinnoUgricMachining At school we never touched on the math of the thermal coefficiency of metals. I'll be paying more attention to that, the less of the myth you can break down, the more accurate and predictable the results ^^
@thingsido4278
@thingsido4278 3 года назад
Thank you for taking the time to teach.
@imonfb
@imonfb 2 года назад
I’ve just spent 7days binge watching your content, thank you for producing quality work and videos to help me with my isolation.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 2 года назад
Wow, thank you!
@clintjohnson2101
@clintjohnson2101 2 года назад
As a welder myself as soon as you welded it up the only thing I was thinking was that had to of shrunk the barrel a bit but i kept watching and was relieved to see you did hone it out after. Great videos! Keep it up!
@papaburf7275
@papaburf7275 3 года назад
My goodness, the variety of operations, the slow-mo, the well thought out shots of seeing the entire process then getting a short before and after, precision lathe work, great welding bead shots while on the rotating positioner, Kurtis' overall skills - all I can say is it's simply machining porn! And Homeless living his best life! Thanks again to all 3 of you for the very best content. P.S. - these outtakes were some of the best.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
awesome to know it's being enjoyed thanks for the great comment
@владимирнадыбин
@владимирнадыбин 3 года назад
@@CuttingEdgeEngineering Привет с россии, посмотрел видео ремонта гидроцилиндра с пакистана произведенного в каком то сарае и ваше. Ваше видео ремонта гидроцилиндра выше всяких похвал, это просто супер.
@Александр-у6и7ш
@Александр-у6и7ш 2 года назад
@@владимирнадыбин В сарае тоже делают нормально.
@hydroman99
@hydroman99 3 года назад
From Winnipeg, I agree with your decision to rebarrel. I have also seen extreme honing leave a horrible taper at the deep end of the cylinder which leaves a guy with the choice to run with a terribly undersized piston or risk a proper sized piston getting stuck in said taper. Keep up with the great content and you'll have a million subs in no time.
@tamasorban4599
@tamasorban4599 3 года назад
that speedrun of the second barrel was epic :D like all your works
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
glad you liked it mate
@mrstrikeabily
@mrstrikeabily 2 года назад
Hi I´m an professional engineer for hydraulic cylinders and I like to say you did a great job. Your machine and welding skills are great. Looking forward to see more of your content.
@themalewhale59
@themalewhale59 3 года назад
That's my Friday off to a Cutting start. Thanks both. And Homey.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
awesome mate thanks for watching
@bradshaw448
@bradshaw448 3 года назад
All those machine owner's are extremely lucky to have you around, great work as always
@stuart6973
@stuart6973 3 года назад
I can really appreciate the high level of precision you do with every job you take on. As a owners of a blacksmith/engineering/fabrication shop over here in the UK 🇬🇧 I wish I had you working for me. Keep up the exceptional work. 👍🏻
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
cheers mate!
@joseenriquez3537
@joseenriquez3537 2 года назад
I use to do all the heavy machining at work makes me happy to see this being done remines me of when I was a young machinist.
@markgriffin4888
@markgriffin4888 3 года назад
I couldn't help but laugh as you were trying to lift that end piece of the floor😂😂😂 Surely the customer has half a brain to know that the supply chain had failed, which meant that you were not to blame for the delay???
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
that bloody flange practically superglued itself to the floor I tell ya! yeah unfortunately we were given a time frame by the other shop boring & honing that we allowed for, which was not met and very frustrating for us and the customer
@markgriffin4888
@markgriffin4888 3 года назад
@@CuttingEdgeEngineering --- sorry,still laughing 😂😂😂
@markfryer9880
@markfryer9880 3 года назад
@@CuttingEdgeEngineering Kurtis, boring or trepanning?
@garymurt9112
@garymurt9112 3 года назад
It's a chain thing. Head guy is yelling at the one under him, then he's yelling at the one under him, and so on till it gets to you. Most upper management is just looking at numbers on paper and typically had to pay for their intelligence (my name for most college educated people). But when you have a machine sitting there not doing anything it's not making money and machines like that tend to make 1000 thousands an hour.
@JlerchTampa
@JlerchTampa 3 года назад
43:32: Thank You for ending the internal argument I was having with myself over the head flange weldment vs. barrel ID outcome! My losing argument on why it might not shrink was related to the mass of the head flange and the stresses involved due to the cylinder / head flange / weldment geometry, which I'm glad to learn you had also considered and addressed because you are fing awesome!
@peterdouglas4073
@peterdouglas4073 3 года назад
Sounds like the arm chair engineers have been putting their two bobs worths in, lol. That puff of smoke, when the oxy torch was great 👍. Every time I watch your videos I realise how much is involved in machining.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
yeah always interesting to read the keyboard warrior comments 🤣
@TomokosEnterprize
@TomokosEnterprize 3 года назад
There sure was a fistful of shrapnel go through this system. Every hydraulic machines owners nightmare for sure. Although sometimes repetitive I enjoy visiting you doing cylinders. That vertical honer for sure tweaks my love of big. Over the years you have shown a number of shop innovations. Very refreshing indeed. If we could turn back time I would certainly be pestering you for a job until you relented eh, LOL. My love for all dogs would have been an up on a resume, LOL. He sure is a happy fella ! A guaranteed smile and chuckle every day, GUARANTEED !, LOL. Just a thought on anti spatter spray. I made my own. A simple mix of distilled water and baking soda works great. About 3 or 4 heaping tablespoons to a 2 liter jug of water. seems about right. My grand dad passed that on to me many moons ago. Most of us visiting here can appreciate a good weld. When machined like you did here show's attention to detail like few can do. I can and am known locally for the talent. It is a thing I treasure for sure. Second time around went by in a moment or two, LOL. Great post eh ! You all take care and stay healthy. These are tough times and I worry about all my friends here on the Tube eh.
@ilvaporizzatore
@ilvaporizzatore 3 года назад
The eye removal with the torch was just like a magic trick to me :D
@michaelcothran4064
@michaelcothran4064 3 года назад
Yes Karen Thank You for your expertise in making these vids !!!
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
You are so welcome!
@badcompany227
@badcompany227 3 года назад
Over here in the Banana Land and must say 12/10. “Stock or Better” is what I was taught. If it doesn’t look and work like it came from the factory you are doing it wrong.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
respect to that mate! Agree 100%
@harveylong5878
@harveylong5878 3 года назад
thats not always a good thing. from the factory Ive seen some sketchy welds, misaligned parts. better to strive to go better standard then OEM
@bretf5371
@bretf5371 3 года назад
Computers I know, mechanical engineering I don’t. I am in awe of your skills, Kurtis, and I envy the work that you are capable of doing. Bravo, sir…bravo!!
@hashemmi24
@hashemmi24 3 года назад
Where to start, the incredible machining that Curtis makes it look easy or the amazing filmography, editing is on another level! Amazed by the iPhone, but I believe a more pro camera needs to enter the scene.
@bigjohnl57
@bigjohnl57 6 дней назад
Really enjoy watching a true mechanic in his trade. Learned a lot
@phalcon23
@phalcon23 3 года назад
I just went to bed in Albera Canada 1am, and I was like hmm... wheres my daily video... so I watched Demolition Ranch... and then low and behold your up! Now I'll be up to almost 2am... thanks... no thatw not sarcastic! Always enjoy your videos! Cant wait till later to watch it lol
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Thanks for taking time to watch and that insane hour of the morning/night 😂👍
@RobActiveShooterEngh
@RobActiveShooterEngh 3 года назад
I'm right there with you out in Chilliwack, BC dude. This is my bedtime snack every Thursday.
@francisschweitzer8431
@francisschweitzer8431 3 года назад
This American 🇺🇸 tips his hat to this Canadian that watches Demolition Ranch.
@phalcon23
@phalcon23 3 года назад
@@francisschweitzer8431 dr, hickcoc, paul Harrell, noir, the guy who does cursed guns, donuts operator... to name a few. Also lock picking lawyer, this old Tony, are my go tools.
@RobActiveShooterEngh
@RobActiveShooterEngh 3 года назад
@@francisschweitzer8431 how can anyone not like Matt?? Him and Kentucky Ballistics rock.
@barrysheridan9186
@barrysheridan9186 3 года назад
Impressive, thanks. I continue to be amazed at how it is possible to machine steels and other metals on a lathe using a small insert, it just looks impossible but it isn’t. Remarkable.
@Paddington60
@Paddington60 3 года назад
Homey gets into his package about as quick as our cat Baggage used to get into Pork Scratchings. One paw holding package secure, other paw raised, one claw extended, and zip, one swipe of her claw and the packet was open. We needed scissors to open them! That must be so satisfying to take in rusty metal and send out a working ram cylinder, well done Kurtis! Giggler doing very excellent work on the photographic front! Homeless doing Homeless things to a very high standard! Thank you Kurtis, Giggler, and Homey!
@bostedtap8399
@bostedtap8399 3 года назад
Never heard of a Cat eating Pork Scratchings
@Paddington60
@Paddington60 3 года назад
@@bostedtap8399 She really liked Pork Scratchings, problem was she would swallow quite large pieces and that lead to scratched throat and a visit to the Vet for some antibiotics to fix that, so that kinda put a stop to her Scratchings. She also liked Marmite, she would lick a teaspoon full. She also liked Almond, she ate the centre out of an Almond cake fresh out of the oven that was cooling and had to have a share of Almond Macaroons.
@bostedtap8399
@bostedtap8399 3 года назад
@@Paddington60 That is a most unique cat.
@tbhorse1970
@tbhorse1970 3 года назад
A 1 man band is not always the best option. But what works is better than nothing when you have a job to do. Congrats on getting things done that others said to hard or impossible to do.
@FrancSchiphorst
@FrancSchiphorst 3 года назад
Thanks for explaining the puff of smoke! :) Awesome job!
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
No worries mate thanks for watching
@FrancSchiphorst
@FrancSchiphorst 3 года назад
@@CuttingEdgeEngineering LOL reply within 15 minutes. Respect from the other side of the world (Pijnacker, the Netherlands) :D
@NilesHlavacek
@NilesHlavacek 3 года назад
Have gotten many items stuck during shrink fits, even after taking numerous precautions. Anxiety every time. Thanks for the great video!
@jimzivny1554
@jimzivny1554 3 года назад
Good video, appreciate the extra explanations, lots of good info. As usual the close-ups and slow motion is very interesting. Homeless REALLY enjoys the new chew toy, too bad it won't last a day or so.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
awesome mate thanks for the great comment
@gwharton68
@gwharton68 3 года назад
I'll bet those cylinders are better than the ones made by Hitachi. Always a joy to watch. Thanks.
@jscbmx21
@jscbmx21 3 года назад
Quality work as always! Would love to get more into the machining side of the trade rather then the fitting/maintenance I do at the moment.
@gustavcrossbow2805
@gustavcrossbow2805 2 года назад
did he maxhine the interior ir it came machined to size
@mcbeenb
@mcbeenb 3 года назад
Another time lapse!! I hope this becomes a regular thing. Its such a great summary of all the small details from earlier.
@johnpartridge7623
@johnpartridge7623 3 года назад
Those Pistons look as if Homey's given each one a Love Bite
@dystopianlucidity4448
@dystopianlucidity4448 3 года назад
Watched this as soon as I woke up, coming back to comment. It’s just not Friday until I watch your vids. And I’m really really happy that other commenters have really noticed how great a job Karen is doing with the vids and editing! The crackling chips were AMAZING! Keep up the great work Karen! Kurtis, your tenacity in getting jobs done and doing your level headed best to give your customers the absolute best product you can give is impressive. Not once have I seen a cutting corners from you. As always, cheers mates! Give homeless a scratch and have a wonderful weekend! Sincerely, Rob
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Hey Rob! We've certainly read many great comments on this video it makes the effort to have the channel & create the videos all the more worthwhile. Yeah when i'm putting my name/reputation on the line with jobs i'm definitely not going to half ass, always go full ass 😂👍
@dystopianlucidity4448
@dystopianlucidity4448 3 года назад
@@CuttingEdgeEngineering never go full Carl, you’ve got an awesome sense of humor. If I ever make to your country, I would love to meet y’all!
@nomen_omen
@nomen_omen 3 года назад
Awesome job, best wishes for the Security Officer from Poland.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Thank you!
@stephenthompson9722
@stephenthompson9722 3 года назад
9:30 to like 10:20 this editing is particularly awesome. Shows the whole story of how it's setup but not dragging on too long. Nice
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
thank you for the great feedback! It's a bit of a balance trying to edit good content but show the progress and still have it make sense 😁👍
@jcoburn429
@jcoburn429 3 года назад
"Faster than cutting with a saw",that there is a man that knows his work,great vid guys and hello from N.Z,have a great weekend also.👍
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
yeah mate thanks for watching over the ditch
@mauserkk98
@mauserkk98 3 года назад
Hats off to Karen, you pulled a quality video out the bag again this week.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Oh thank you!
@RobActiveShooterEngh
@RobActiveShooterEngh 3 года назад
Literal mouth drop when you heated the barrel and the eye dropped off. I don't remember seeing you do that before. Cool.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
thanks for watching!
@wavydavy9816
@wavydavy9816 3 года назад
I think it's great the way that you explain the reasons for making the decisions you do regarding which approach you take to a job (and everything else is great as well, but specifically that) 🤗
@Renville80
@Renville80 3 года назад
“So that was quicker than cutting it with a saw.” (nods) Spoken like someone who definitely knows what they’re doing. 👍
@RollerCoasterLineProductions
@RollerCoasterLineProductions 2 года назад
The companies that use your services are VERY lucky to have you. Another great video, as always.
@rockridgewoodshop
@rockridgewoodshop 3 года назад
Here with the midnight crew watching in California !
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Awesome mate thanks for the late night views 😂👍
@olevjorgensen
@olevjorgensen 3 года назад
Really good work Kurtis. It must be extremely satisfying for your customers that they can see what they are paying for when they get quality work done with you.
@braidwooddesignstudio5536
@braidwooddesignstudio5536 3 года назад
Enjoy watching your skilled work and Karen's masterful recording, she has a flair for knowing when to do lose-ups, slomo and what angle we should see it from. Thank you. One question, what do you do with the waste?
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
all the waste metal goes in our big scrap bin that is collected by the metal recyclers
@googlesux1062
@googlesux1062 3 года назад
@@CuttingEdgeEngineering other than the boring bars, any other shop made tools made of your cut offs?
@mikaelkvarnt6183
@mikaelkvarnt6183 2 года назад
@@CuttingEdgeEngineering n
@rbowe6
@rbowe6 3 года назад
Not sure there's been a single episode that I've not picked up something worthwhile. Sometimes a small gem sometimes a chunk of gold. And besides that entertainment value you pair bring is something regular tv has lost. Well done, hanging out for more. Some of the best youtube out there to end a day with.
@jacobeaton4042
@jacobeaton4042 3 года назад
“I run coolant on the parting tools cause I don’t like running dry”…ohhhh boy why do I have a feeling there’s an inappropriate outtake at the end of the video that happened right after that 😂
@KarateSensei71
@KarateSensei71 3 года назад
Homeless loves that chewy! Karen does a bang-up job with the videos, very professional, and her giggles make me smile. Another fantastic video Kurtis, you are a master machinist, Engineer, and artist.
@Mizone505
@Mizone505 3 года назад
Beautiful work kurtis and Karen. Love the explanations on how to, and the camera work is so good. U r rockin
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Cheers David I always enjoy the bigger hydraulic work and Karen had fun editing this one, thanks for watching mate
@ramanshah7627
@ramanshah7627 2 года назад
For all the machining I've done and seen and loved, there was something especially compelling about that time-lapse of turning the mill-scale off that huge cylinder blank
@artmckay6704
@artmckay6704 3 года назад
Speaking of stress levels going through the stratosphere, I can totally relate! Been there, done that! I reluctantly drove big rigs for many years (nearly 2 decades) and frequently I'd be told that if I'm late on that load, I'm fired. Couldn't sleep, couldn't go to the bathroom, couldn't do anything but drive - sometimes for days on end. I think prison camp would have been far more enjoyable. Anyway, I can relate. High stress is no fun! :)
@AquaPeet
@AquaPeet 3 года назад
So your superior is literally telling you to break the law and safety regulations or you'll be fired... that's..... awesome. Be safe man! Enough drivers fell asleep during a long haul...
@artmckay6704
@artmckay6704 3 года назад
@@AquaPeet retired now and disabled from the damage done to my back. Yes, it was an incredibly brutal business and many of my bosses couldn't have cared less about legalities. I'm just glad it's over.
@Fireclaws10
@Fireclaws10 3 года назад
@@artmckay6704 sucks about your back man. Everyone talks about why young people aren’t getting trade jobs, it’s cos i’ve seen the result. You end up getting paid better at the start, then after 20-30 years your body is fucked, and you can’t even properly enjoy retirement. And you still need to work another 5-10 years after before you can retire with a broken body. Not for me. The boss doesn’t care about you. Don’t want to be in a job where someone else can sacrifice my physical wellbeing for their bottom line.
@artmckay6704
@artmckay6704 3 года назад
@@Fireclaws10 yup, guard your health and don't sacrifice it for anyone if you can avoid that. I was trapped in an area without much in the way of jobs and I had family I had to care for. Many of the older drivers I met were out on the road to take care of a family member at home. I think the best option (but risky) is to pick a business you enjoy and find some way to work for yourself. Risky as it is, at least you can enjoy going to work and you have the possibility of doing well but there's no guarantees....
@craftycri
@craftycri 3 года назад
Thank you sir! Your effort and craftsmanship are appreciated by thousands!!!
@assassinlexx1993
@assassinlexx1993 3 года назад
Bottom line the costumer got his hydraulic rams back no fault on your part. Finished to CEE standards. You must be happy it was just two rams. The filming and editing is as silk. Homeless proudly shows off his latest toy. Team CEE the best engineering 💯👍
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
yeah was happy days to see those get the strapping machine & on their way back to the customer who was also happy.
@AquaPeet
@AquaPeet 3 года назад
@@CuttingEdgeEngineering Great to hear that the customer was happy! You also have those that rip the new product out of your hands and angrily throw the money back at you LOL
@avoirdupois1
@avoirdupois1 3 года назад
I really appreciated the sound and videography on this episode. I could really hear the clink of the tools being put into the holder, and see the tumbling sizzling chips.
@VilsonAlba
@VilsonAlba 3 года назад
very good, you are amazing :)
@stevenr8606
@stevenr8606 3 года назад
... that's what she said.
@gioelebalzani2074
@gioelebalzani2074 2 года назад
Vilson sapevo che ti avrei trovato sotto uno di questi video prima o poi😂
@giacomoorru3420
@giacomoorru3420 2 года назад
@@gioelebalzani2074 Anche io l'ho pensato ahahahahah
@micahcarrillo8281
@micahcarrillo8281 2 года назад
I liked this video best of all the others because you were able to explain why you chose to use these techniques. Thanks for the details!
@kempy666999
@kempy666999 3 года назад
Missed it 🥵 (trying for first comment 😀 ) Checked time difference - daylight saving means video will appear an hour earlier ✔ RU-vid subs page loaded up ✔ Google Chrome crashes 15 seconds before video timed to appear 😢 No other choice but to sit back and enjoy the vid - that is what I'm here for anyway. Thanks in advance, All the best from the UK, Paul
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
Was waiting to see yours! Thanks for watching mate
@ulrichmachtle4864
@ulrichmachtle4864 3 года назад
it's funny that ppl ask you why you things not like this or that way... wtf, isn't it obvious that you KNOW what you do? that's why I like this channel, it's such a bliss to watch professional work.
@CuttingEdgeEngineering
@CuttingEdgeEngineering 3 года назад
we get some entertaining comments and questions
Далее
DEMONS ARE ATTACKING BRAWL STARS!!!
09:08
Просмотров 13 млн
новое испытание
00:40
Просмотров 329 тыс.
DEMONS ARE ATTACKING BRAWL STARS!!!
09:08
Просмотров 13 млн