Repairing a Fiberglass Hood From a Rolled Semi Truck 

If you enjoy my content please subscribe: youtube.com/@tjvalleygarage/featured?sub_confirmation=1

Great video.

Excellent video!

I would have removed the four screws of the headlamp assembly. It is not a big job, it is actually easier than taping it. And it makes a much better job with the new color underneath the lamps.

y'all scuff it down and use 50 grit 2in discs on air tool to feather out your damage.. then lay down your glass work.. make sure to "dig" into glass and replicate surrounding thickness... try to slightly extend from the damage area out... when fiberglass breaks it kinda spreads out because of the bi-axle of the fiberglass or multi direction of strands so it likes to crawl etc.. anyways use 80 grit to knock down the glass work get it close and use GUIDE COAT to get it flat... then you can wipe it down and fare it out with filler.. then I usually hit it with 80grit again real quick to knock that top layer off gummy ness off then start working your way up to 180-220... at that point check your bodywork etc.. .. then your ready for primer... now this depends on how much bodywork was done and how badass of a job your trying to get.. but sometimes you'll need to use high build primer and block out that primer first then shoot a finish primer and guide coat that and block it up to 600 and your ready to go... also you can use a red or grey scotch pad on riveting or edges or corners and such that are hard to get with sandpaper. PREP IS EVERYTHING 99% PREP... I work on boats not cars or trucks.. been painting boats and doing custom glass work for 10 years now im about to do my 2500 12 valve soon and my little Dakota im gonna try and get it on here... just never been good with the YT stuff and editing the video. Awesome video btw great work. the glass work was done very well and properly done. loved the content. 🤙✌ follow me on inst @fiberglassworkz

What is the body filler you used for the big holes before applying the fiber glass called ?

Amazing

Good job

no glass on the inside ? nice video , not so sure about the repair

Great video! What grit sand paper are you using pre-primer/base coat and pre-top coat. Thanks.

GREAT JOB !!!! BUT wish you would have said the GRITS of the paper for each step !! Just sayin !! TANKS

Do more videos, you have a TV voice

What kind of primer gun is that thing is a beast

Hey what is the putty you used at 9:17? And 9:34? Thank you!!

Is this your first hood repair?

Hey how much of paint is required for this hood?