Тёмный

Repairing an iPhone 11 "No Power" logic board (shield removal without disturbing the sandwich) 

STS Telecom
Подписаться 146 тыс.
Просмотров 14 тыс.
50% 1

SRA Low Melt: amzn.to/3TkPMMq
Like, subscribe & become a member for more! :-)
Need repair or data recovery? www.ststele.com/mail-in
~~~Links to tools that I use~~
Microscope Stuff:
Microscope: amzn.to/2pZLjk0
Ring light: amzn.to/2CPz4il
Camera: amzn.to/2Ckxiot
Ocular for HUD: www.clinicadelamanzana.com/1i...
Soldering:
Hot air station: amzn.to/2tf6iEC
Soldering Station #1: amzn.to/2pZyfLy
Soldering Station #2: amzn.to/2CrDjzs
Micro-Pencil Iron: amzn.to/2RNgGwZ
Micro-Pencil Tip: amzn.to/2pVDjjW
Curved Tip: amzn.to/2RWl0rJ
Long Bent Tip: amzn.to/2pPwqiK
Bevel Tip: amzn.to/2nFk105
Mini Hot Tweezers: amzn.to/2pZmogy
Flux: amzn.to/2pXOGrL
Solder Paste: amzn.to/2pXPWuZ
Electrical:
DC Power Supply: amzn.to/2NGMhuV
Multimeter: amzn.to/38SrSQx
Software for Board View & Schematics:
FlexBV: pldaniels.com/flexbv
Phoneboard: phoneboard.co
ZXW Tool: amzn.to/2NMw5s6
Thermal Camera: amzn.to/3MoojFL
Recording Gear:
Microscope Camera: amzn.to/2Ckxiot
Camera on my hands: amzn.to/2RKezdm
Main Camera: amzn.to/2tg1vRQ
Microphone: amzn.to/36GqbSF
STS Telecom is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
~
~
~
#iphone #motherboard #repair

Наука

Опубликовано:

 

3 мар 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 104   
@nelsonrodrigues76
@nelsonrodrigues76 3 месяца назад
I'm from Brazil, I live in Rio de Janeiro, I started following your videos 5 years ago and thanks to you, today I have a Technical Assistance for Cell Phones, Tablets and Notebooks. Thank you very much for your inspiration Jason, your videos changed my life story!
@ststele
@ststele 3 месяца назад
That is really good to know! It helps me to keep going! Thank you 🙏
@nelsonrodrigues76
@nelsonrodrigues76 3 месяца назад
Thank you very much and I will visit you soon and bring some gifts from Brazil to your family!@@ststele
@ewertonmoraes6076
@ewertonmoraes6076 3 месяца назад
Another one fron Brazil. Like we say here, the most part of brazilian, dont even like to aprove your's skills or pay for knowledge
@asifsidd1652
@asifsidd1652 3 месяца назад
please send me schematic diagram net names ues in circuit 👍
@josephking6515
@josephking6515 3 месяца назад
@@asifsidd1652 Why should he do that? Go onto BadCaps and find it for yourself. Have you never heard the parable; _Give a man a fish and you will feed him for a day. Teach the man to fish and you feed him for life._ By giving you the BadCaps name I have fed you with schematics for life. Enjoy.
@paddysfixes
@paddysfixes 3 месяца назад
Absolutely clean job! That was a very minimal invasive and non destructive way to replace the bad cap. Nicely done mate!
@MrPnew1
@MrPnew1 3 месяца назад
No ball squeezage - an excellent result again thanks, Jason
@MrPnew1
@MrPnew1 3 месяца назад
Yes yes, I do like saying ball squeezage
@ststele
@ststele 3 месяца назад
I’m certain there will be ball squeezage in an upcoming video! Lol - thanks 😂
@MrPnew1
@MrPnew1 3 месяца назад
@@ststeleOooo, I will have to stock up on popcorn then 🍿 Let’s face it, as males and BGA sodderers, the squeezing of balls will never sit easy with us 🤣
@youtubasoarus
@youtubasoarus 3 месяца назад
I imagine that low melt has a lot of gallium in it. Gallium melts in your hands. Some sort of Gallium+Lead alloy.
@1080p_gamer_
@1080p_gamer_ 3 месяца назад
Yo dude your AWESOME!!! From watching your videos I was able to locate and remove a VCC Main Ground short and get my dads water damaged iPhone 6 that died early 2015 to work again!! over 1000 of my childhood pictures saved.
@ststele
@ststele 3 месяца назад
That’s good to know! Thank you for commenting.
@anthonyblacker8471
@anthonyblacker8471 3 месяца назад
You know, Jason, with the right amount of heat and just enough low-melt solder, one could undo the world if so inclined. Great work on that nasty shield. edit: You know.. and I know.. when you say something like "before I put this shield back on..." I was ALMOST expecting to hear you say "I'm going to test this real quick, just to be 100% sure." ha.. who am I kidding?! Love it!!
@ststele
@ststele 3 месяца назад
LOL, thanks! I fully agree with this.... and I really should do more testing before welding things back together. :D
@joelkist6493
@joelkist6493 3 месяца назад
Good job... You can hear the confidence in your narration. Nice!
@ststele
@ststele 3 месяца назад
Thank you!
@davidstrider2007
@davidstrider2007 3 месяца назад
Another witty save by The Master. Great work as always Jason. Pleasure to watch. Hope you have a great week bud!
@TokyoChanSan
@TokyoChanSan 3 месяца назад
Your videos get better. The enjoyment of seeing how you progress makes me appreciate you more.
@ststele
@ststele 3 месяца назад
I appreciate that, thank you!
@MicroSupplies
@MicroSupplies 3 месяца назад
love the good explanation of what you are doing.
@nalindisanayaka6220
@nalindisanayaka6220 3 месяца назад
Experience , patience and knowledge together do great job . As always you did it genius .
@craigh2565
@craigh2565 2 месяца назад
RU-vid recommended your channel to me a few weeks ago. And after watching a few videos I'm hooked. love your problem solving steps and repair solutions. One question I have, why do you pronounce solder as 'sodder'?
@mohammeddaas2002
@mohammeddaas2002 3 месяца назад
Thanks for sharing your experience I'm so excited with your videos waiting for next video
@chrisfeaka4250
@chrisfeaka4250 3 месяца назад
Beautiful work as always sir!
@jozsiolah1435
@jozsiolah1435 3 месяца назад
Multimeter pointed to any component can start the power, charging. This is a trick, works with analogue and digital multimeter. If it’s the phone user’s fault, the software will get blacklisted and won’t boot after a year. Usually the phone can swap users.
@user-ek9go3kf2w
@user-ek9go3kf2w 3 месяца назад
Nice and meticulous work you done .
@tonyarcher1997
@tonyarcher1997 3 месяца назад
You make these task look so easy. Its alway so easy to follow along and for the most part understand your thought processes. Im always amazed with your approach . Thanks for the awesome content. Lol always chuckle at the whispered "apple logo" Great stuff Master Sensi.
@josephking6515
@josephking6515 3 месяца назад
For the viewers who use a *real* temperature scale, 138°F is *59°C* so a hot fart could melt that -sodder- soLder. 😁 According to my daughter's coffee/barista machine coffee temp is 176°F (80°C) but it does vary a small bit according to coffee and style. Never knew about coffee or tea temps because I can't drink either of that crap. Coffee makes me puke 🤮(seriously) and tea I find very distasteful and requires 8 teaspoons of sugar to make it palatable for me. *Thank You* for the videos Jason. Excellent as always. 👍
@ststele
@ststele 3 месяца назад
Lol thanks! I just had to Google it and you’re right - Hot coffee ranges from 71.1C to 85C! I’m the opposite when it comes to tea. I prefer no sweetener. I’m not sure how I wound up this way. 🙂
@TheM0nkeyBomb
@TheM0nkeyBomb 3 месяца назад
LOL always that Angry Sus face 12:57
@ericdeleon30
@ericdeleon30 3 месяца назад
Watch your videos all the time keep it up You’re doing good.
@ststele
@ststele 3 месяца назад
Thank you! 🙏
@mirceaalicu
@mirceaalicu 3 месяца назад
Great video Jason, as always from you. I was using the same technique, but lately I am using an Aixun cnc grinding machine and just cut a small part of a shield, where it is required. No heat and works much faster
@reinaldoroman1132
@reinaldoroman1132 3 месяца назад
That felt like performing a surgery! Nicely done!
@damolin77
@damolin77 3 месяца назад
You the man Steve Great fix buddy.
@ststele
@ststele 3 месяца назад
Thank you!
@woollysoxx
@woollysoxx 3 месяца назад
Very nice work
@badarbaya5616
@badarbaya5616 3 месяца назад
Im from morocco. You are best in wold
@saeidgoodman2940
@saeidgoodman2940 3 месяца назад
good job man
@dannywhac
@dannywhac 3 месяца назад
Another great job - cheers Jason. Also good to see Cornholio making a cameo 'Would you like a spatula? For your bunghole?'
@ststele
@ststele 3 месяца назад
LOL! Thanks 🙂
@0ctivate
@0ctivate 3 месяца назад
Hi Jason! Im loving the "fast chip" low melt. Instead of using the hot air, i started using a second bigger soldering iron and a bit of regular solder on the top edges of the shied to get it hot enough. Then the mini iron to spread the low melt in the seam. Works really good. I also chop up the low melt into tiny bits into container and apply it where i need with tweezers. Ps- bugging you again to try the Quianli 007 tool from sentrix to remove underfill.
@0ctivate
@0ctivate 3 месяца назад
Hey J! i mave just just had some interesting success getting low melt into hard to reach places with this method above. I used a Mini C115 Bent Iron Tip to reach to the bottom, Then a huge C245 - 908 Tip at 380 and touch to the heat sheild next to the small tip. The trick i just figured out is to touch the big tip to the small tip (lol), so not only do you heat the shield but you supercharge the mini iron with more heat at the same time. Board was Ipad Air 4 Shield and cam off pretty easy with hot air after this. But some boards are easier then others, so not sure yet.
@anthonyblacker8471
@anthonyblacker8471 3 месяца назад
I get the logic behind maybe not wanting you to put reassemble the phone so they can 'see' what you've done in there.. funnily enough it probably looks cleaner than factory after you're finished with it. I'm curious what they thing they'll find.. interesting Jason.. I bet a dollar they don't dare attempt removing that super elegant shield you had to take work under.. oh the fun..
@ststele
@ststele 3 месяца назад
There is one big difference! The sticker that covers tue shield was left removed. Those get tore up pretty bad so I usually leave them off. Some models they go back on nicely tho. 🙂
@KARAR-9691
@KARAR-9691 3 месяца назад
جيد
@user-ht4dd6mj8t
@user-ht4dd6mj8t 3 месяца назад
классное видео. все очень качественно сделано.
@gsmtelnet8774
@gsmtelnet8774 3 месяца назад
Good job, congratulations! Where is the led lighting, what lens do you use on your microscope? Thank you in advance for your answer !
@mohamedrimzan1241
@mohamedrimzan1241 2 месяца назад
Clean Work and No clue for repaired !
@rickchowsr2532
@rickchowsr2532 3 месяца назад
Ssshhhh I’m sneaking a peek at todays episode, at work, I’ll get the whole episode in lol
@wagnerdiaz6997
@wagnerdiaz6997 3 месяца назад
Did I miss where he posted the link for the Low melt solder?
@stryder751
@stryder751 3 месяца назад
is there any reason why you couldn't use the ultrasonic cleaner to clean out the flux?
@user-yt9ld9gt7j
@user-yt9ld9gt7j 3 месяца назад
I have a qustion : what was the qundition of the phone when arrived what was the error shown on lcd , thx for sharing
@felixhquiricada2754
@felixhquiricada2754 3 месяца назад
I am from the Philippines, can U share what brand and model of your rework soldering station, microscope and also, flux, soldering tin, cleaning liquid that your work is very clean.
@RalphVB
@RalphVB 3 месяца назад
if I want to start learning what you do, what is a good place to start? I don't see myself getting a hardware engineering degree, like I think you did, but I want to learn enough about circuits to get into it and start attempting to fix electronics as a hobby (got a main job as a carpenter which I am not letting go). I will go to china this summer and am planning on buying all the necessary hardware to at least play around with logic boards. So there is that, but before I do I want to read and learn some of the theory and see if I am willing to push through. In any way thank you for posting yet another amazing fix. And I really mean it. I follow plenty of electronic repair content creators, and most of them simply don't even come close to your knowledge. Especially the way you understand the entire circuits and how they work, and where in the end the problem should surface. I don't need to become quite as good as you, but if I could only posess 5% of your power I think I could die happy. Have a great day Jason!
@ststele
@ststele 3 месяца назад
Hello, I actually didn't get any degress or even go to high school. I do plan to get a GED & possibly some other certifications some day tho :-) I learned most of what I know about electricity in my teens and early 20s by taking things apart and building projects. I had given up on board level electronics repair many years ago but then I found Louis Rossmann & some other channels on RU-vid showing that with a microscope, it was still possible! That's really where this latest venture began - I bought a microscope & soldering equipment and continued learning hands-on and from RU-vid. Honestly, I probably would have saved myself a lot of headaches if I had taken a microsoldering class! My first equipment was really inexpensive with the microscope being the most expensive tool. I probably spent $200 total on soldering station, hot air, DC power supply & ultrasonic cleaner in the beginning. I would *not* recommend my first soldering station though.. it had the tendency to self-destruct! LOL Hopefully this helps! For the record - I do regret not finishing school. I appreciate you watching & commenting!
@RalphVB
@RalphVB 3 месяца назад
@@ststele Wow, could have fooled me for sure. I always took things apart as a kid, but usually not in the right order XD. Anywho, thanks for the reply. This made me confident enough to at least try and have a go at it. Money really isn't an issue with the equipment, it's moreso that I don't like wasting money on something I will not use. I guess I will though, cause I find it so interesting. It's very inspiring to hear you say all that and I know now what to do to get myself started. Thanks Jason, have a good one!
@cdarting91
@cdarting91 Месяц назад
7:12 So what you’re saying is that this hasn’t gotten very ballsy yet? Lol.
@haliimaaxmed
@haliimaaxmed 3 месяца назад
jason can we get more videos for iphone 14 & 15 series because they are less common in youtube
@ststele
@ststele 3 месяца назад
Hopefully soon. The newer phones are really time consuming to repair & difficult to also spend time recording.
@haliimaaxmed
@haliimaaxmed 3 месяца назад
@@ststele 🙏🙏🙏🙏🙏🙏
@tonyrgnash
@tonyrgnash 3 месяца назад
Afternoon Jason
@ststele
@ststele 3 месяца назад
Good afternoon! :-)
@nightsaber2272
@nightsaber2272 3 дня назад
I have a question. How to test dock flex without phone? Wich pins on it's connector provide +5V?
@clausanders2886
@clausanders2886 3 месяца назад
Any reason, why you didn't check, if the problem was solved, before putting the shield back on?
@n4_ku
@n4_ku 3 месяца назад
You replace the component and solder back the shield without checking if the short is gone, also you put it all back together before testing if the phone was working. Is it confidence from experience or you just didn't include it on the video?
@samjones1954
@samjones1954 3 месяца назад
Better guess... It is someone who wants to pretend they fixed it. lol
@Gadgetfix2671
@Gadgetfix2671 3 месяца назад
I can't belive it i watch the vedio at night very next day costumer came with iphone 11 with same short💪👍
@ststele
@ststele 3 месяца назад
Wow what a coincidence! 😮
@bestbuildpc
@bestbuildpc 3 месяца назад
What was the temperature exactly?
@ronlevin2339
@ronlevin2339 3 месяца назад
Jason, Can I just insert a small wire cutter in a hole on the shield, and just cut the shield off ? I know it is less beautiful in the end, but a piece of copper tape will do the same job in the end, and cutting is much simpler and no problem with balls under the NAND
@ststele
@ststele 3 месяца назад
Yes, it's completely ok. Many people just cut the shields as needed.
@dave7010
@dave7010 3 месяца назад
👍👍
@LeeAntonioDixon
@LeeAntonioDixon 16 дней назад
How can I send my phone in to be repaired I’m having a mother board issue also but need all the data so don’t won’t to replace motherboard completely
@vladimiralena9129
@vladimiralena9129 3 месяца назад
👍👍👍
@AlexElectronica
@AlexElectronica 3 месяца назад
The mummy motherboard XD
@DEADPOOL-fm1bz
@DEADPOOL-fm1bz 2 месяца назад
hello bro, is it okay to buy a refurbished phones???
@HighMansx
@HighMansx 3 месяца назад
In before you removed the wrong cap after putting the shield back on ;)
@ststele
@ststele 3 месяца назад
That would be pretty funny.. 😂
@ItsNotRaphi
@ItsNotRaphi 3 месяца назад
One Question. Can I , if i want to remove such a shield, heat this shield up and put tweezers in two of the holes and the lift this up? Also good video :)
@ststele
@ststele 3 месяца назад
Hey, thanks! Yes - the only real danger on this shield would be the CPU on the other side. Without using low melt, it is really easy to accidentally disrupt the CPU on the opposite side of the top PCB.
@ItsNotRaphi
@ItsNotRaphi 3 месяца назад
@@ststele Ok Thanks
@ItsNotRaphi
@ItsNotRaphi 3 месяца назад
@@ststele I want to learn this because I also want a repair shop one day. I am 13 and learnd a few things from people like you. I can solder but not very good. But thanks to you I can learn about soldering a bit more.
@humphreysmphoka6448
@humphreysmphoka6448 2 месяца назад
Do you have lessons?
@atoms1978
@atoms1978 3 месяца назад
👏👏👏👏👍
@praveenraj9270
@praveenraj9270 3 месяца назад
❤👌👌
@sunflowers6612
@sunflowers6612 3 месяца назад
✨✨👍👍
@lorenzosutherland9232
@lorenzosutherland9232 3 месяца назад
Why apple using samsung parts
@DFluent
@DFluent 3 месяца назад
Because samsung manufacturers their displays
@bobspurloc
@bobspurloc 3 месяца назад
the mummy method
@ststele
@ststele 3 месяца назад
Lol! Yes
@Tim.Stotelmeyer.2984
@Tim.Stotelmeyer.2984 3 месяца назад
Got to wonder why Apple used a higher temp solder on that shield. It is almost as if Apple is purposely making it hard for people to fix their phones. Imagine if Apple watches this video and see how you removed the shield and decides to make it even harder by putting legs on the shield that goes through the board and secures it in the inside of the sandwich. And puts circuits on the underside of the shield itself to keep you from cutting the shield. Of course I just gave Apple ideas.
@oblioi
@oblioi 3 месяца назад
:o)❤
@markusjohansson844
@markusjohansson844 3 месяца назад
You will soon be like the rest of the world and use metric, now you started to mix usage of °C and °F as a start.
@ststele
@ststele 3 месяца назад
Yep, it’s true. When building I prefer metric and at the bench I think in C. I refer to imperial measurements as “noodle units” and find metric to make a lot more sense. But for what the temperature is outside, it’s still F. I don’t do any conversion for temps - I just learned soldering in C.
@aceace5457
@aceace5457 3 месяца назад
it was so good watching you lol how are you.
@ststele
@ststele 3 месяца назад
Hey, thanks for watching! Trying hard to keep business moving + make time to produce content for RU-vid.
@aceace5457
@aceace5457 3 месяца назад
@@ststele i been trying but gave up i only got 7 views lol good luck at least you have one .
@QsTechService1
@QsTechService1 3 месяца назад
Nice save Jason by the way, I sent you a message on business Facebook just wondering if you got it I haven’t heard anything back from you. Let me know. Thanks.
@ststele
@ststele 3 месяца назад
Hey, thanks! Sorry - we have not been keeping up with the Facebook page and didn't see your message! I just responded there.
@QsTechService1
@QsTechService1 3 месяца назад
@@ststele OK awesome I just responded back to your message lol got to stay up at the Facebook haha It’s a revenue source somewhat
Далее
Only DEC could make a PDP-11 PSU this insane…
23:58
iPhone died while charging - CUSTOMER NEEDS DATA!
23:49
skema redmi 12c
6:57
Просмотров 30
iOS 18 vs Samsung, Xiaomi,Tecno, Android
0:54
Просмотров 92 тыс.
YOTAPHONE 2 - СПУСТЯ 10 ЛЕТ
15:13
Просмотров 97 тыс.