Repairing the B pillar on the T boned Honda CRV

Подписаться 215 тыс.

Просмотров 96 тыс.

50% 1

Last time we took the CRV apart, today we start some repairs. We will move the B-pillar around and see if we can get it back where it belongs. If we can, we will cut it open and see what needs to be replaced on the inside. We did get a few parts, two doors and 3/4 of the side of a CRV. Two of the three parts were even in the right color..... Bonus!
My website if you want to purchase a car or parts: www.vehcor.com
Amazon store: www.amazon.com/shop/vehcor
For Vehcor merch: teespring.com/stores/vehcor-3
#boringbuildfriday #honda

Хобби

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 292

@rafars2246 Год назад

Stupid. But I get it, not everyone can afford a non totaled car. Just pray there's no more accidents on the same area or you'll deeply regret it.

@vehcor Год назад

I would ask for specific reasoning for your comment but I don’t want to expose your lack of knowledge any more than you already have.

@rafars2246 Год назад

@@vehcor you're kidding right? You do what you do, and "don't know"? Do you really think you can bend back structural damage and the next accident is going to be ok because it looks pretty after your hand touch? That train of thought makes you a criminal, trying to fool people this way.

@vehcor Год назад

What bent back part was not replaced that is required in the repair procedure?

@vehcor Год назад

I’ll rely on my years of ICAR training over someone on the Internet.

@rafars2246 Год назад

@@vehcor now I'm super impressed with you. A booklet reader who thinks he's an engineer LOL

@johnkendrick7304 Год назад

I got to tell you, every time I watch you you blow my mind with the bodywork you do. Absolutely incredible. You're a credit to your profession

@TommyNitro Год назад

I'd buy one of his restored cars.

@vehcor Год назад

Thanks, I just do it the way it should be done.

@KyleEbright Год назад

@vehcor Sadly, plenty of shops don't. You always do a great job!

@BrucePierson Год назад

It might be 40 years old, but it still does the job and you couldn't do what you do without it!

@mikechiodetti4482 Год назад

Since I've never done body and fender work, watching a pro do what it takes to get everything aligned and measured correctly is all new and fascinating to me.

@buckpowers4837 Год назад

It is great to watch a pro at work and notice how everything seems to be planned for the next step. Keep it up.

@vehcor Год назад

The job is always planned to the end, sometimes you have to adapt. I fully intended on going into the roof. I was pleasantly surprised. Sometimes you get a win!

@jasonbucher5622 Год назад

official 5 n 1 uses (from painting days) - scraper/paint can opener/roller squeegee/window glazing remover/caulk tip cutter. but also, yeah, hammer, flat blade screwdriver, phillips on loose storm window/down spout screws, throwing knife into trees, pry bar, putty knife...greatest tool ever

@ElectoneGuy Год назад

Very nice that the inner center pillar has factory sectioned seams and you didn't have to go into the roof.

@vehcor Год назад

I’m glad I checked before I just assumed and started cutting up the roof! 😂

@randomcrashingfacility31 10 месяцев назад

Whoa I didn't realize that, very cool!

@deanh7190 Год назад

Mr. Spotty never complains and always has a smile on his face no matter what kind of jamb he finds himself in...perseverance!

@Elger77 Год назад

Great sense of humor! Sarcasm is great tool.

@vehcor Год назад

👍🏻

@Chr.U.Cas1622 Год назад

👍👌👏 2) I had some questions but you answered them all while working! Very well done again and as always (video and work). Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health in particular.

@vehcor Год назад

Thanks for the support.

@wethepeople7961 Год назад

I enjoy watching these crazy rebuilds that you do. It shows how you have mastered this craft. Cheers

@Jayf1981 Год назад

How mad was mr spotty when you tossed him in "the" pile? A wrong time to figure out the door doesn't fit right. Ah, the voice of experience. Excellent work, Scott, and congratulations on the meticulous attention to detail.

@steved3702 Год назад

I'm wondering about the fate of the VIN sticker... Come back next week for the next intallment of Vehcor!

@vehcor Год назад

Yeah, the painting gnome gets mad if he has to repaint something because I messes up. I try not to mess up. 😂 New stickers can be purchased.

@oldman936 Год назад

Yes! Boring Build Friday is here! Have a great weekend and 4th of July Scott! 🇺🇸

@vehcor Год назад

Happy Independence Day to you as well.

@rafaeltorovip Год назад

I am just thinking the amount of cars that are now in a junkyard with similar damage that could be easily fixed. Great video 👍

@cheesecurd100s Год назад

"easily"

@vehcor Год назад

I’m constantly competing against one of the local yards for cars. They usually win, I can’t save them all and make a profit. 😢

@rafaeltorovip Год назад

@@vehcor keep doing your great job. Talented and with a fantastic sense of humor. We will continue supporting you. 👍

@cheesecurd100s Год назад

I shope copart a lot and it's hard to come out ahead, and usually there's almost always more wrong with it than advertised

@andrewbarnett4621 Год назад

Glad to see Mr spotty hard at work 😅😅😅

@peterparsons7141 Год назад

That’s funny, the pinstripe was so out of place, was glad to see you peel it.

@jimwiskus8862 Год назад

Another walk in the park for Scott. Flawless work as usual. See you in the next installment. Have a great safe weekend.

@vehcor Год назад

Thanks, this was easier than I had anticipated.

@glenharper3136 Год назад

Thanks for sharing Scott. I saw Mr. Spotty again.

@Showing_the_car_ Год назад

You, sir, are a true craftsman. A real pleasure to watch your videos.

@vehcor Год назад

Thanks!

@rm5902 9 месяцев назад

Great work

@johnmehaffey9953 Год назад

Scott far lesser channels have more views but you are in my opinion the very best on you tube, attention to detail and repairing the auto better than it left the factory, top class, ps I also enjoy your humour

@darinvee4980 Год назад

I try to mention his channel in other comment sections as often as I can. It is too bad that he doesn't have around a million subscribers, his content is top notch!

@vehcor Год назад

They are here to make content, I am here to sell cars. They make their money on the videos, I make it on the rebuilds.

@garthbutton699 Год назад

I can see another CRV rebuild in the near future?I appreciate your skill level🤗😎🤗😎

@vehcor Год назад

They are hard to get a deal on due to their popularity but it is not for lack of trying.

@99andrianmonk Год назад

Nice job, Scott. Another great job.

@vehcor Год назад

Thanks!

@effenfish661 Год назад

i just started watching this channel. besides the snappy commentary, i like seeing what is under the skin of the vehicle.

@vehcor Год назад

Glad to have you with us!

@dominicfong6341 Год назад

My Civic was also T-boned in the same fashion almost 30 years ago, after a six-week-long fix it was ok on the outside but the ride height was off(driver side lower by 5mm). Wished I had the money for a replacement back then. The estimated cost back then was $7500Cdn.

@kevinwilliams9380 9 месяцев назад

the 5 n1 original use are as a putty knife, a scraper, a gouger, a paint roller cleaner, and a paint can opener. your uses, inventive 😉Me, never amounted to much in life, just became a painter. Love your work

@1STLAR2147 Год назад

I’ve used a pair of Klein lineman pliers as a hammer for years. Didn’t feel like climbing off the ladder to get an actual hammer! Got the job done!

@vehcor Год назад

Every tool has a hammer side. 😂

@1STLAR2147 Год назад

@@vehcor We need to patent that! Little arrow on the packaging that says hammer side. Don’t tell another living soul! 🥴

@canadatransistor Год назад

i was impressed with the hydraulic section of the task. Can't say i've seen such a procedure many times.

@michealplater9007 Год назад

That tool, left hand side of pillar and right hand of side pillar, makes 9 and 10. 10 in one hand tool.

@minaflash5107 Год назад

Absolutely love your professionalism in your method of fixing that car’s structure, i been following you now for couple of months and now i am taking a collision repair program and i am learning a lot from you thank you sir❤️ Big fan from Tennessee

@stevie.dx1710 Год назад

I used to be a gnome and you drilling out that lower section and hitting it with the chisel was awesome. Came right out. Haters be damned. I know you're doing sh*t right.

@robbieeades1956 Год назад

Scott, you are a true professional in this business. I would happily buy one of your rebuilds. You repair them better than new. Thanks for the video.

@gillesthibault429 Год назад

Hello Scotty! From a place 2 1/2 miles from where this CR-V was born, Alliston ON. (Looked at the VIN in the 1st episode, cause some were also born in East Liberty OH, and Morrisburg IN)

@hanshoogendyk2203 Год назад

At 71 a retired mechanic with crash repair expirience, a appreciate watching people do " the right thing" in their trade, looking at the inner city road map of scars on the back of my hands they mostly relate to the crash repair part of my life, 😅😅😅 do you buy the 10 cut off blades you really need or the " bitch mittens" you should be wearing to avoid the next trip to the first aid box, 😂😂😂 I guess most of us know that answers and we can assume everyone that commends has more self preservation and money😅

@deanh7190 Год назад

Painters Tool Top 9 Uses: 1) Roller cleaner 2) Paint can opener 3) Hammer strike 4) paint Scraper 5) Corner gouging 6) Putty knife 7) pry bar 8) Spot weld breaker 9) Pizza cutter

@vehcor Год назад

Axe throwing training tool Box cutter Chisel Door gap measuring device I could go on! 😂

@mikefladgate3714 Год назад

Great work as always!!! Keep up the great work!! I always finish off my Fridays watching you rip apart and repair the damaged rockets. Happy Canada Day 🍁!!!! And July 4th 🎆!!!!!

@logancarter2134 Год назад

Great episode!!!

@Jesselovespinball 11 месяцев назад

The 5 in 1 tool is one of my favorite tools ever . I’m in the construction trade for work but get my hands into all kinds of things and that tool comes in handy for so many things . It could literally be called a 100 in 1 tool

@ozbassman11 Год назад

Thanks for the entertaining and educational videos.

@vehcor Год назад

No problem.

@gthree0239 5 месяцев назад

Bondo dust, rust, corruption and everything else found in Illinois…that’s got me rolling. Thank the Lord I only work in Chicago and don’t live there.

@danwingo7512 Год назад

Great job Scott, plus IMO this is the best channel on RU-vid.

@tocsa120ls Год назад

Last week I found out the "wiggle and pull" method needs some extra... pull when trying to get out a GM overhead console. For some reason they used like 6 metal clips to hold up a piece of plastic that has the domelight and a sunglass holder in it.

@vehcor Год назад

For those lead sunglasses of course. 😂

@paulh6096 Год назад

Amazing work. I am in awe of how hard you work and how well your videos are edited with clear (and often funny) commentary. I wish I had 1/10 of your skills in these areas. Keep up the great work and the videos! Would love to see you repair an Audi since I own a couple and would love to see what is unique about fixing some of them.

@cr2158 Год назад

Scott another bang up job brother

@whteman2 Год назад

Now Scott is a guy I would trust to change my cars oil.

@sennubalan3733 Год назад

Great job 👍

@freestyle.d. Год назад

Congrats for reaching 200k subs❤. I love your work.

@vehcor Год назад

Thanks!

@jstoney6471 Год назад

Good Job! Have a Happy 4th!

@zacharywong483 Год назад

Really nice job here, Scott!

@tube8533 Год назад

Nice job!

@petergarofolo9385 Год назад

You are amazing Scott. 👍 👍 👍

@royalcrowntowing2464 Год назад

A good mechanic is so under rated

@pauld3638 Год назад

Perfection as always

@45AMT Год назад

Looks good Scott!

@paulacutt9644 Год назад

Great to see a Master Craftsman at work !

@johnpartridge7623 Год назад

Nice job Scott 👍👍👍

@vehcor Год назад

Thanks!

@dewalt10-2-4 Год назад

Excellent..Thanks for sharing.

@vehcor Год назад

No problem. Thanks for watching!

@FC-cz6zd Год назад

Remarkable stuff👍

@jimmyaber5920 Год назад

I would love to see a drilled spot weld, panels replaced and mig through welded crash test. I have seen so many comments critical of mig weld through.

@vehcor Год назад

That is exactly what the people that designed the repair procedures do to decide what the repair procedures are. The same people critical of welding are also the ones that think you could straighten it. These are the “experts” I enjoy making fun of. You know, the ones that have never worked on a car in their lives and all their training comes from watching videos.

@kenmurray4232 Год назад

Nice work. Looking forward to the next video. Have a good July 4th

@lstone.09 Год назад

Awesome video Scott. 🚗🚗🚗

@FlyEaglesFly19111 Год назад

Gadzooks.. Scott is on a roll again. Stay safe and be well. Have a good weekend

@vehcor Год назад

Have a great weekend as well!

@Oh_that_guy Год назад

Another great video. Happy 4th of July @vehcor aka Scott from Nova Scotia.

@vehcor Год назад

Thanks!

@alberttibbets6567 Год назад

Love your door gaps.

@hipinretku Год назад

Hey you did get around to fix the audio thing, nice, thanks! Usually when new video comes out from you it's late night in here so that's why I'm using headphones.

@vehcor Год назад

Third time is the charm. 😂 I also fixed the problem that caused the problem. I don’t want to be an AV engineer!

@Paulster2 Год назад

I've often wondered if when body guys are hammering on body panels to provide stress relief ... is that stress relief to the panel, or just stress relief for the one doing the hammering ... maybe both? :o)

@vehcor Год назад

Definitely both! 😂

@tomswindler64 Год назад

👍👍👍😎😎😎great video as always,keep doing what your doing.kudos

@douglasrichardson8525 Год назад

As always a great job and very good content, it would have been totally scrapped over here in the UK, I don't think any of our bodger's, sorry body repairers would know how to do it without a lot of bondo Regards Doug

@sjupicudacuda898 Год назад

our prayers worked it fits!

@clintprice2123 Год назад

Scott you’re slacking on the sarcasm this week 😂. Nice job so far!

@navvet4518 Год назад

It’s when they designed shit to last. That frame machine will still be around after we’re gone. Great video brother.

@motokhrykhay591 Год назад

@vehcor not sure if would matter anymore, but on those CR-Vs, the front bumper grill is two pieces, and you don't have to remove the tiny fragile trim that clips into the headlight. Great video, as always!

@vehcor Год назад

I would have to remove it from the bumper, which is worse. I took the lesser of two evils.

@dancanal3201 Год назад

I love your videos. I love that you are anal about your work. Would you mind putting a small video on the yellow stands. I see a lot of people making them out of wood. I prefer steel, being squashed like a bug is not on my to do list. Keep building.

@vehcor Год назад

Those stands came with the frame rack. I’m actually using them for their intended purpose if you can believe it. 😂

@kimkramer5773 Год назад

Thank you

@81cb750fss Год назад

I guess as usual the supervisor took leave for the holiday and you gotta cover down on the shop huh?😂

@MrKennyaa Год назад

i think you have informative videos, great!

@vehcor Год назад

Thanks

@mandymoo7406 Год назад

a great watch,i know you dont like safety gear but i was sectioning up an aftermarket slam last week on my workshop floor with my safety glasses on and a bit of swirl came up from the piece on the floor and hit me on the bridge of the nose,so near that i had visions of going to ae and them getting the big magnet out for my eye as the piece rusted in my cornea,just saying done the job too long

@TimothyHigdonHiggs Год назад

Awesome!!

@bubbagump1452 Год назад

Great video as usual as we say in louisiana finer than frog hair keep up the great content and as you say in the pile

@BrucePierson Год назад

Looks like Mr Spotty went South with the B pillar skin.

@vehcor Год назад

He’ll find his way back I’m sure.

@a.c.m.e.ink.4568 Год назад

Spotty showed up to work two weeks in a row. 🤔 Must be some kind of new record for him. Either that or he wants holiday pay ! 🤑

@vehcor Год назад

I’m going with the holiday pay. 😂

@hondatrix Год назад

I like how the VIN is smiling at us,,, 😂

@cadman10000 Год назад

Beaty stick goes BONK!

@loupecci4901 Год назад

I was wondering if the 654 in one painter’s tool was going to make an appearance and was not disappointed!

@muskokamike127 Год назад

4:52 I have to laugh, whenever you to that you remind me of the old stop motion kid's tv show David and Goliath and their "do bees" that would fly around and crate everyone up. they made the same sound lol

@JuanCarlos-wf7et Год назад

Hola saludos desde CDMX de 🇲🇽👍😎🤟

@davide.s.9880 Год назад

I guess I wasn't looking close enough. I would have thought all the work was around the B pillar I didn't see anything wrong around the A pillar / front of the front door. But you are there and the pro so .

@vehcor Год назад

The a pillar was fine, the hinges were just bent from the door being pulled back.

@davidg2073 Год назад

Love your videos but If I recall you did say you would return to the Mustang rebuild/rebody once you hit 200K subscribers. Cannot wait to see you get back on it! He says hopefully!

@vehcor Год назад

Not what I said, it was even easier than that. Go rewatch the video, ironically, that will insure you see it sooner. With a little effort on the part of people complaining, you could see it every week.

@curttabor2827 10 месяцев назад

would love to see the vid of pizza girl having a hard time , you know share the funny, great vids .great know how to the work thanks

@tedjohnson64 5 месяцев назад

Very interesting that the high strength steel B pillar comes in 2 sections (top and bottom). Is that a safety feature? Deflecting energy via a known crumple seam halfway up the B pillar?

@travlite8496 3 месяца назад

Can you tell me what brand and size grinding disc you use to grind down the spot welds to break them loose thank you

@MrHmongrice Год назад

should've worn eye protection when pulling the door hitch.

@andrewbetschman3175 Год назад

@vehcor happy fourth of July. How is the g8 repairs going?

@vehcor Год назад

Happy fourth. I haven’t had time to get to it.

@nickb4237 Год назад

You could spread some Miracle Whip with that tool as well…. So 9in1 and counting….

@regsmith7604 Год назад

Original uses for your 5 in 1 tool. #1. Scraper #2. Roller Cover Cleaner #3. Flat Blade Screw Driver #4. Mini Pry Bar #5. Mini Hammer #6. Paint Can Opener #7. Hook Draw Blade #8. Weapon when going to and from work

@burtbacarach5034 Год назад

#9, Cheese slicer/spreader

@regsmith7604 Год назад

@@burtbacarach5034 Hahahaha ok😊

@garysimonson9593 Год назад

Pinch weld clamps. Oh, no. Now Carmax will know it's been on a frame rack. What will you do?

@vehcor Год назад

Sell it to someone that will give me more money.

@kwindens9424 Год назад

@vehcor Hey where do you get your your body parts doors and rocker pillar from?

@vehcor Год назад

Whichever salvage yard has the highest quality at the best price. The doors, came from one yard, the fender from another and the quarter from another.