✅Frame Repair in the Driveway with Great Results? Let's find out !! 

It takes just a bit more to go from mediocre to good. But a lot of technicians out there just don't care...

Or get paid enough

@@fix206 Yes for whatever the reason they may have.. Keep up the good work Fix! Phillip Hall

There’s the issue of *time is money* and *good or fast or cheap* - you can have any two but never all threee For shops that have a daily minimum of things that need to get done, everything gets rushed and minmaxed. Meanwhile, this guy has all the time in the world and a source of content. That’s a great thing, just keep in mind that not everyone has such luxury.

Hey I'm viewing all the way from trinidad 🇹🇹 Great video I want a part 2 plz 🙏

You are most welcome !!

I have spent 20 years doing exactly this and that frame machine is a fancy tool I thought the old body pullers that use a lip bolted down to concrete were slick but this is cool

Maula rakh hath hola

Glad you enjoyed it! I love sharing the knowledge especially if it's helpful to other folks. Got a lot more to come!!

Absolutely ForceBuild , you said it!! Phillip Hall

Absolutely, it just takes a little bit of creativity to make most things possible. No need for a fancy shop with $30,000 frame racks and paint booths... The same could be done right in anyone's garage, driveway or a backyard. Stay tuned for more !

@@fix206 The correct tools make a great difference but it also takes great insight to accomplish what you have! Phillip Hall

I mean he has a frame rail, laser alignment equipment, hydraulic pulling equipment. Various clamps. The thing that measures hole centres when there’s something in the way of the tape (forget the name, he did say in the video)……to be fair he has a pretty impressive setup, far more than most amateur home mechanics. Having said that, having the equipment is nothing without the knowledge and experience of how to use it. This guy is seriously good at what he does…..and the fact he can explain exactly what he is doing and why is a gift to the viewers. I want to be clear, I’m not trying to take anything away from what this man can do…..but he does have quite a bit of fancy equipment. No doubt he could probably make a pretty good job of it without any of the fancy gear…..but to get it mm perfect like this cannot be done with a tape measure, grinder and ratchet straps.

@@seshelbow336 Yes and to be fair to him, he has made most of this ‘fancy’ equipment himself (including the frame machine) further more, he has taken the time to make and post videos here on this channel explaining in detail of how he has made each tool. Phillip Hall

@@seshelbow336 Everything he has he made himself or can be bought up from Harbor Freight for less than $1000 total. He has nothing fancy that an average home mechanic WOULDN'T have, it's all easily affordable from Harbor Freight, he even buys some gear from there. His gear is not expensive at all. Only thing he didn't make was the frame tower, which can be bought used for a very good price. Only thing you're right about is the knowledge and skill but those are something anyone can gain overtime from a few projects in the garage/driveway. You learn by doing.

I always do as good of a job as I possibly can, even the cars that I'm not keeping, I cannot pass it on to someone else knowing that I cut some corners somewhere along the way. Always getting them done as if they were going to be my personal vehicles for years to come...

@@fix206 And the quality shows! Phillip Hall

Much appreciated, Phillip!

Pennies on the dollar sounds like a steal to me! I'm new to collision, and it just dawned on me how much cheaper it would be to just purchase a total vehicle.

Thank you! I try :)

Bedworth is a market town in the borough of Nuneaton and Bedworth, Warwickshire, England

You are 100% correct. It's all about the prep first, same as with paint work. If you did not lay down the groundwork everything that follows isn't going to be satisfactory.

Thank you Robin, I got a lot more coming, stay tuned!

Thanks man !!

Wow, thank you! You're welcome aboard!

My pleasure! And as always I got lots more down the pipe !!

Haha... My pleasure, much more to come!!

Oh you know there is always more coming... Did you see how long your hair was in that vid?

I try 😎

Thank you so much 😀

Haha.. I appreciate that !!

I try to make my videos as education as possible, thanks for watching :-)

Haha... I like getting straight to the point !

Thanks for watching!

Glad you liked it 👍

Muchas Gracias amigo!!

Thank you! Will do!

Thank you very much!! I appreciate it !!

Much appreciated!

Welcome aboard!

Thank you, I appreciate it!!! And happy holidays to you and yours !

Thanks Bruce!! Much more in the works, stay tuned !

@@fix206 will do. And your very welcome 🙏

Thank you so much 😀

Thank you, I appreciate that!!

Thank you, I appreciate that!

More to come!

Haha... Thanks!

Whenever I do eventually sell these cars I always disclose the full history. Especially now with Carfax and everything it's not something that you can hide

Next vid should drop by the weekend 😎

There is a follow up video to this one, lot's more good info there... Here is the link if you're interested: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h1KnIMv08N0.html

Thanks again!

Thank you very much!

Thank you, thank you very much!! 🕺🏻

Thank you very much!

Thank you, I've posted a new video this morning, more great information there that may be of interest to you. Cheers !

Thank you and welcome aboard !!!

Thanks for watching!

Thank you so much 😀

Glad to hear it!

I appreciate that !!

Thank you! At some point I did not have the machinery, so I built it, I also did not have much knowledge and believe it or not most of the stuff that I know about the framework I learned on RU-vid 😂 and I suppose skills come with time as learned knowledge is applied and perfected 👍

Thank you very much! I try 😎

Thank you very much, one of the goals of this channel is the show folks that you don't need a fancy facility or controlled environment to do jobs such as this one...

Thank you very much!

Thank you Andy, I appreciate that!

Denis, you are most welcome, thanks for watching!!!

Measure seven times, cut once 😎

Glad you enjoyed it! More to come !

Thank you very much, I appreciate that !!

Thanks for the visit !!

Thank you! Cheers!

👍👍👍

Glad you like them! Thanks from watching! I got much more in the works

Thanks cowboy, got more in the works !!

Thank you so much 😀

Appreciate that!!

Glad to hear, this is why do these videos :-)

Many thanks! And thanks for watching!

Thank you very much!