Replace Bathroom Sink Water Supply Lines

Подписаться 86 тыс.

Просмотров 222 тыс.

50% 1

Complete steps to replace bathroom sink water supply lines. If a bathroom faucet flexible water supply line or a rigid metal water supply line under a bathroom vanity is leaking, with a little bit a patience and skill, it can easily be removed and replaced.
The rubber gasket on flexible water supply hoses can crack and leak. Rigid metal water supply lines can rust and leak. They can be replaced with stainless steel braided lines or the plastic PVC hose type.
How to Use a Basin Wrench: • How to Use a Basin Wrench
DIY Basin Wrench for Plastic Faucet Nuts: • DIY Basin Wrench for P...
Check out my other videos, bookmark this channel by subscribing, it’s free! / @know-how-now
Disclaimer: Due to factors beyond the control of Know How Now, I cannot guarantee against improper use or unauthorized modifications of this information. Know How Now assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Know How Now recommends safe practices when working and or with tools seen or implied in this video. Due to factors beyond the control of Know How Now, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Know How Now.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@Know-How-Now Год назад

Link to Know How Now videos - plumbing help: ru-vid.com/group/PLvce66kQTjJTz0cqcI_HDnaLbNLDONCVP There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link: www.youtube.com/@Know-How-Now/videos

@colleenkaufman9139 4 года назад

The Basin Wrench you recommended was the ticket to less frustration! Thank you so much!

@Know-How-Now 4 года назад

You are welcome, Colleen. There are now over 200 how to/repair videos, organized by playlist, on the channel. If you have a free moment, click on the channel name to check them out. Thanks for watching the video.

@dootedzooties Год назад

This is really helpful! Appreciate you going above and beyond to provide key details that could make or break the process; For example, holding an additional wrench on the base to stabilize the pipe while you unscrew the bolt above it.

@Know-How-Now Год назад

You are welcome. I try to put important details in the videos. It's good to hear that the extra effort is appreciated.

@johvileeck4231 2 года назад

One of the few videos I can find on changing this pipe! Thank you so much, you just saved my floor. Pipe broke.

@Know-How-Now 2 года назад

You are welcome.

@chicksgrowtoo Год назад

Subbed & liked immediately! 🥳 I’m not going to lie, the fact that ur a chick doing this gave me the encouragement I need to fix the leak in my bathroom. Thanks!! ❤❤❤

@Know-How-Now Год назад

Welcome to Know How Now. Best wishes for replacing the bathroom sink water supply lines. Thanks for commenting and subscribing.

@maryhelen1011 9 месяцев назад

That basin wrench is so cool! Definitely getting one. Thanks!❤

@Know-How-Now 9 месяцев назад

You are welcome. If you need a video showing how to replace a bathroom sink faucet, I have one, here's the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XqE18_D_R3g.htmlsi=bCXky3HcKuAIx7Qm

@randyfitz8310 Год назад

Straight forward presentation of how to perform this job. Great video imagery and narration. Thank you!

@Know-How-Now Год назад

You are welcome, Randy. Thanks for the feedback.... that's exactly what I try to accomplish with the videos. The newer ones are a little better, I am always trying to improve the quality.

@Tipperary757 Год назад

Yep, I need a basin wrench. Bummer. Thank you. Very well filmed + explained.

@Know-How-Now Год назад

If you have some pvc pipe laying around, you can make your own. I have a video for that: goo.gl/maps/Ju8EpgApb8dXhm9M9

@notoriouskelly 5 лет назад

Very well filmed and explained - Many youtoobers could learn from your example - thank you!

@Know-How-Now 5 лет назад

You are welcome. Thank you for taking the time to comment and the kind words.

@jamesfagan2749 3 года назад

replying to notorouskell: these are the facts -- a well lit vid + a steady camera. STAND OUT people are the thinkers keep up the good work

@terrydoyle1141 5 лет назад

Perfect! I wanted to know about the "basin wrench" and there were two examples in this very helpful video. Now maybe I can avoid that call to the plumber1

@Know-How-Now 5 лет назад

Thanks for the kind words, Terry. Good luck on the repair.

@dsanchezart 4 года назад

Thanks! I have the metal rods for supply lines and I wouldn't have known what a basin wrench was without your help.

@Know-How-Now 4 года назад

You are welcome, David!

@lavy1513 6 лет назад

Thank you!!!Watch your video then went to hardware store bought a wrench & that tube then watch your video again and Voila🤗🤗Leak fix!!!!!

@Know-How-Now 6 лет назад

You are welcome, it's always great to hear that the video is helpful. Thanks for leaving a comment.

@hersonlamolli3317 4 года назад

Excellent instructions...A + 👍👍👍

@Know-How-Now 4 года назад

Thanks for taking the time to give a compliment. It's always great to hear the videos are helpful.

@tworth1953 5 лет назад

I have started putting a tiny bit of anti-seize on the threads so next time they are no problem to remove.

@jimmymason7461 Год назад

This helped me. Thank you!

@Know-How-Now Год назад

You're welcome!

@carol2132 3 года назад

metal line hot the other cold lol we did it backward!

@DJ-pn9te Месяц назад

how do you disconnect hot and cold lines to bathroom faucet handles for moen. the quick connect ones. i need to disconnect to tighten the nut on the underside counter for one of the on/off handles?

@Know-How-Now Месяц назад

solutions.moen.com/Article_Library/Removing_Quick_Connects

@myssdaisy2009 5 лет назад

Thank you for that will quick how to video 👍👍👍👍

@Know-How-Now 5 лет назад

You are welcome, Daisy.

@joshlyons5417 4 года назад

At 4:45... do you caulk the gap between the pipe and the cabinet? I ask because I had a small leak in my upstairs bathroom and the water went through the gap between the water supply line and the bottom of the cabinet, and left a small stain on my ceiling on first floor. I'm wondering if I should caulk the space where the water supply line goes through the bottom of the cabinet so if there was a leak the water would stay in the cabinet? Thanks for the videos!!

@Know-How-Now 4 года назад

Hi Josh, putting caulk in that location can't hurt anything, though it wouldn't be something that is normally done.

@joedevitto6113 Год назад

Mine is leaking at both ends i need to get a new one today .. hot water one do you need to put tape at all i was wondering ...Thanks for sharing

@Know-How-Now Год назад

No need to put plumbers tape on the connection of these hoses. The rubber gasket makes the seal.

@joedevitto6113 Год назад

@@Know-How-Now Sounds good. Thanks for getting back to me on this ~

@crimsontide1980 2 месяца назад

So I just replaced the water supply line under my bathroom sink, was leaking from the fitting going into the top of the hot water valve. Water line no longer leaks but now I dont have much water pressure from my hot water. I checked the other sinks and the water pressure is fine, so it has to be something with the water valve for the bathroom sink. Cold water has plenty of pressure just not for the hot water. Any suggestions?

@Know-How-Now 2 месяца назад

Maybe the washer on the valve broke apart and is blocking something. I have several videos on water valves. Here's the link to the playlist. ru-vid.com/group/PLvce66kQTjJRuwqmH0S5Shjfj5HeRdbMr

@kateyroad5115 4 года назад

this was perfect! Thanks!

@Know-How-Now 4 года назад

You are welcome, Katey. Thank you for the compliment. There are now over 200 how to/repair videos, organized by playlist on the channel. If you find some free time, click on the channel name and check them out. If you subscribe (it's free) you can easily find all the videos.

@KT-sv6jx Год назад

Thank You So Much!!!

@Know-How-Now Год назад

You're welcome!

@jamesfagan2749 3 года назад

So i had (have) a leak under bathroom sink pipes are original 1985 + hard water corrodes so i replaced the whole trap thingy and the drain and apparently the supply lines are leaking also -- thank you

@Know-How-Now 3 года назад

You are welcome, James. Way to go on the successful repair.

@JGtennistraining 3 года назад

Great tips!!

@Know-How-Now 3 года назад

Thanks for the compliment!

@LauraStaunton493 2 года назад

I know this video was 4 years old, but when I unscrew the nut it does not release the rigid pipe. What am I doing wrong?

@LauraStaunton493 2 года назад

I mean the but comes out but the gold ring, I don't know what it is called, does not come out and I can't remove the pipe

@Know-How-Now 2 года назад

I'm not clear on your question. Maybe you have a rigid supply line? If yes, check out this thread and please support this channel by subscribing.... terrylove.com/forums/index.php?threads/tips-on-how-to-disconnect-rigid-water-supply-line-from-tank.89140/

@KathyBuono 6 лет назад

Great video. Thank you.

@Know-How-Now 6 лет назад

You are welcome, Kathy. Please consider supporting the channel and subscribe. It's free and it will allow me to make more videos.

@bruceezell4017 4 года назад

Great clip.

@Know-How-Now 4 года назад

Thanks for the compliment, Bruce.

@risabug7772 3 года назад

We just got a new bathroom sink and faucet. My husband says the water lines are too short. They won't attach to the faucet and the water hookups.

@Bougie642 8 месяцев назад

Do i need to turn off the main water supply

@Know-How-Now 8 месяцев назад

Only if the valves below the sink do not turn off the water.

@bettycollins4540 2 года назад

What link did I do I need for that

@coles481 5 лет назад

This video was great. However,I'm trying to replace mine bc one is leaking, the one in my bathroom doesnt look at all the same. It has a tab you pull up on to stop water flow but I can see a way to detach the hose to replace it. I'm not sure where to go from here.

@Know-How-Now 5 лет назад

Check out this thread, maybe this is what you have: terrylove.com/forums/index.php?threads/these-arent-shutoff-valves-what-are-they.40709/

@coles481 5 лет назад

@@Know-How-Now that's exactly what we have. Thank you. Now I'll have to figure out to replace them. Thanks a bunch.

@Know-How-Now 5 лет назад

It's my pleasure to point you in the right direction. As many others have done, please consider supporting the channel and subscribe. It's free and you will always be able to find over 200 videos on the channel (If you don't want to subscribe, check out the videos by clicking on the channel name). They are organized by playlist.

@Barima_tumtum1 5 лет назад

My kitchen tap is not flowing and I have remove both hot and cold flexible valve from the rigid pipe and I noticed there is no water coming out of that.. So I am asking what must be the problem?

@Know-How-Now 5 лет назад

I don't understand the problem you are trying to explain.

@bettycollins4540 2 года назад

What size shoe supply line should be

@Know-How-Now 2 года назад

Take the old one to the hardware store. They will help you get the correct replacement.

@Cybecow Месяц назад

Ah...dont mention thread/nut sizes. What i was looking for.....😢

@Know-How-Now Месяц назад

ambassadorfaucets.com/supply_fitting_connections

@glider208 6 лет назад

I want to replace the flex hoses on my bathroom sinks. I took off the old ones when replacing the faucets. The old hoses still had the paper tags on them showing the size. So I took the old hose to Home Depot, bought the same size flex hoses. Came home to put them on, and the screws on the ends that attach to the water supply would not screw on to the water supply valve. I guess the compressor inside the screw is too large, or something, it will not reach the treads on the water supply valves. Does this mean that I will have to replace all the water supply valves in order to replace all the flex hoses? What a pain!

@Know-How-Now 6 лет назад

I apologize for not answering sooner, apparently I was not getting notifications from RU-vid for a couple of days. The flexible hoses have different threads. You should not have to replace the water supply valves. To be sure you are getting the correct fittings, take the old hoses to HD. Thread the old hoses onto the bathroom shut off valves at the store, that will prove that you don't have some odd ball installation. If your hoses thread onto the valves at the store, then find the new hoses that thread onto the valves. I hope that helps, again sorry for not responding more promptly.

@mdt0150 6 лет назад

Same problem here..replaced the faucets and lines are inside the faucet M10 connection I Believe the other end is supposed to be 3/8 but there is to much play between the 3/8 end of hose and water supply inlet. Would those in fact be 1/4 inlet at Supply valve.?

@Know-How-Now 6 лет назад

It's possible that the size at the valve is 1/2 or 3/8 inch. I'd take the old hoses to the store and thread them on valves to see which size you have.

@dustinbell5851 6 лет назад

djMarky Mark m10? You working on a Honda lol the top of the sink is 1/2" pipe thread. The other end should be a 3/8" compression thread if going to a valve. The only real time you have 1/4" compression is an ice maker line.

@Jesse-lt4jr 5 лет назад

@@Know-How-Now I'm having the same issue you're having. Home Depot even tested my old hose and the new one to make sure they are the exact same fit and it is. For some reason, the one end does not want to connect to the plastic valve I have. The other end that connects to the sink connects just fine. Did you do anything special to resolve this issue?

@2010stoof 2 года назад

I can't find one about removing the grey integrated lines grr

@Know-How-Now 2 года назад

If this is what you have, do a search for it... I don't have a video to help you with it. Sorry. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w9HZL82DzMc.html

@LinaLa 4 года назад

😊🙂🤔

@MrTribefan68 4 года назад

NO plumbers tape?

@Know-How-Now 4 года назад

Nope, the rubber gasket on the ends makes the seal.

@anthonycrawford6278 2 года назад

Thirteen adventures Mobile

@wayneguy6043 3 года назад

Is this Jane?

@Know-How-Now 3 года назад

Nope.

@tubbyoneness Год назад

Not helpful to me. I needed teflon tape to make it work.

@nachc6459 3 года назад

The stupid screw at the end of the hose won’t come off

@Know-How-Now 3 года назад

Try spraying the connection with penetrating oil, lightly tap it. Wait an hour and try again. PB Blaster makes it and you can get it at the big box hardware stores. It has a terrible odor, so ventilate

@nachc6459 3 года назад

@@Know-How-Now okay thank you i will. I’ve tried twisting it so much, I actually grinned the screw/nut down

@DJMichaelAngelo 6 лет назад

@1:32 = wanna use English please lady? "oil pennatrent" = what the heck do you mean, W-D 40? etc?

@Know-How-Now 6 лет назад

Here's the link for a search for oil penetrant: www.google.com/search?client=firefox-b-1&ei=z7XdWvjyJcWB5wKDy7fwAw&q=oil+penetrant&oq=oil+penetrant&gs_l=psy-ab.12..0i71k1l8.0.0.0.181808.0.0.0.0.0.0.0.0..0.0....0...1..64.psy-ab..0.0.0....0.Kl7IDM-C9_U

@DJMichaelAngelo 6 лет назад

thanks

@Know-How-Now 6 лет назад

You are welcome. I've always had good results with PB Blaster.