Replace Ford F150 Front ABS Wheel Speed Sensor

Подписаться 48 тыс.

Просмотров 14 тыс.

50% 1

Replace a front ABS / Wheel Speed Sensor on a 2018 Ford F150 4WD. Links for the sensors and the tools you'll need below:
Front ABS/Wheel Speed Sensor: BRAB-514: I recommend Rockauto.com
Pneumatic Impact Wrench (if you have a compressed air source): amzn.to/3Yzmbjn
Breaker Bar - 1/2" Drive: amzn.to/3OAwcbJ
21mm Socket: amzn.to/3qoPKrw
or
Impact Socket Set: amzn.to/3sb9Q90
Metric Wrench Set: amzn.to/3QA9Utd
or
8mm Wrench: amzn.to/3OTrUxo
13mm Wrench: amzn.to/3s9y8jV
21mm Wrench: amzn.to/3qv0FzU
Caliper Hanger Hook: amzn.to/3KCnrMY
Metric Allen Wrench Set: amzn.to/44e1avU
Thread Locker: amzn.to/47vMNG2
Tools I use in my shop:
Gearwrench 3/8" Ratchet Set: amzn.to/48m0jMJ
Craftsman Screwdriver Set: amzn.to/3SbBY6I
Gearwrench Plier Set: amzn.to/3RFXQWc
Klein SAE Nutdriver Set: amzn.to/3TPltOT
Klein Metric Nutdriver Set: amzn.to/3vqvHuS
Gearwrench SAE/Metric combination wrench set: amzn.to/3vryOCR
Kreg Pocket Hole Jig: amzn.to/3H9tdni
Rhino Ramps: amzn.to/3pDcRtD
3-Ton Floor Jack: amzn.to/3w0JQKx
MITER SAW: DeWalt DWS779S amzn.to/2K7Su5x
PLANER: Porter Cable PC-305TP No Longer Available
Recommended Planer: Delta 22-555 (similar) amzn.to/47mnPHQ
DUST COLLECTOR: JET DC-650 amzn.to/2I4tOZA
BISCUIT JOINER: Porter Cable 557 Plate Joiner amzn.to/2IrCiJj
ROUTERS: Bosch 1617EVSPK 2.25hp amzn.to/41EXqnz
Makita Compact 1-1/4hp Router RT0701C amzn.to/3zZ1Hnk
CORDLESS DRILL and DRIVER: PORTER-CABLE PCCK619L2 20V amzn.to/4aEb6Dq
WELDER: Hobart 500559 Handler 140 MIG Welder amzn.to/2WrCLAe
GRINDER: Delta Power Tools 23-197 8-Inch amzn.to/4azyIJr
DRILL PRESS: ShopFox W1668 Benchtop w/Spindle Sander amzn.to/3l4SxPV
NAIL REMOVER: amzn.to/2XxSmzq
MULTI-TOOL: amzn.to/2Xu3TQl
Photo/Video/Audio Equipment I use:
Neewer Ring Light: amzn.to/2ZCCM7R
Canon Rebel SL3 (250D) camera: amzn.to/41FOPko
Canon 55-200mm STM lens: amzn.to/3DG9Qlk
Diety D3 Microphone: amzn.to/3SofWuJ
The above are affiliate links, while they do not cost you any additional money, I do earn a small commission when you use them. thanks!
CoffeyCraftsmanCo
Dennis Coffey
Replace Front ABS Wheel Speed Sensor Ford F150

Хобби

Опубликовано:

13 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@PTSix-eg4zj Месяц назад

Thank you that red tab on the connector was driving me nuts...everyone else skips over it or say "remove plug". You are kind enough to explain HOW. Thank you very much.

@dwcoffey Месяц назад

I'm very glad this was helpful! Thank you so much for watching!

@cbbaa7 8 месяцев назад

I just want to say thank you for this. I got to the point where I popped the red lock off the plug and was getting frustrated that the wire and plug weren’t coming about. You are a life savior, sir.

@dwcoffey 8 месяцев назад

Thank you for watching! I'm glad it helped!

@cliffcooke5700 4 месяца назад

THANK YOU for showing how to open the clip! I had everything done except the clip! Frustrated and getting dark! BRAVO!!! Thank You! Thank You!

@dwcoffey 4 месяца назад

I'm glad this helped, Cliff! Thank you for watching!

@dalemcintosh-xv1ye 9 месяцев назад

Thank you this was very helpful! Great video

@dwcoffey 7 месяцев назад

Thank you for watching, Dale!

@JN_USMC 11 месяцев назад

Nice job! Thanks for sharing!

@dwcoffey 10 месяцев назад

Thank you for watching!

@fZionists78 20 дней назад

7:40 Is it me, or is there a crack in that upper controlling arm? Thank you for the exceptionally well made and helpful video. Very generous.

@johnreinburg859 11 месяцев назад

Thank you for sharing Dennis! Hopefully, I will not have to do this in the near future.

@dwcoffey 11 месяцев назад

Yes, hopefully, you won't have any trouble! Thanks for watching, John!

@GHOST-ey9ee 2 месяца назад

Man dennis you are the man thanks buddy

@dwcoffey Месяц назад

Thank you!! I appreciate you watching!

@Avaren 11 месяцев назад

NEW DENNIS VIDEO DROPPED LETS GOOOOOO

@dwcoffey 11 месяцев назад

Thanks for watching!

@jimrockfish1875 Месяц назад

We wear the same brand safety shoes!

@dwcoffey Месяц назад

LOL! For a long time, I swore I'd never wear crocs. My wife bought me this pair and I love them!! Thanks for watching, Jim!!

@ButchShelton 7 месяцев назад

Great job. Will the ABS light on the dash reset or do I need a high $$$ code reader?

@dwcoffey 6 месяцев назад

Thank you for watching, Butch! It depends on what the problem is. I was getting a bad wheel speed sensor code and all the other associated errors. Replaced the sensor and cleared some of the codes, but not all, including the ABS light. Think I need to replace the wheel hub next, still troubleshooting. Some of the parts stores will read and clear codes for you. You could try that first. If the code/light comes back, you may have to keep troubleshooting.

@ManuelGonzalez-ul6yi 8 месяцев назад

Awesome video got mine replaced since the break caliper bolts fell out and the caliper slashed the sensor wire got it replaced after watching this video but the ABS light is still on. Did you have the same issue?

@dwcoffey 8 месяцев назад

You may need to clear the codes with a code reader. I have a different problem, actually have a bad hub sensor too, so I'll do a video later on how to replace that.

@4eyedturd663 5 месяцев назад

If you changed out the speed sensor because the code called out the front left, erased the code after changing the part but the code came back after a short drive what would you do next?

@dwcoffey 5 месяцев назад

Thanks for watching! I actually have the same problem, except mine is with the right front. So far, I've blown out the port for the speed sensor (sensor removed) with compressed air to be sure nothing was blocking the gap between the sensor and the encoder ring on the hub. I've tested resistance on the sensor to be sure the replacement wasn't bad. I have Forscan, so next, I'm going to run the oscilloscope in Forscan for all 4 wheels while driving to see what the sensor signal quality on each looks like. Depending on the results of that test, I'll replace the hub on the right front (with new encoder ring). I'll post another video if I figure out what my problem is and fix it.

@mikez.1711 3 месяца назад

Thanks for the video. Is this the same on a 2019 F-150?

@dwcoffey 3 месяца назад

Thanks for watching, Mike! It should be the same for a 2019.

@timothyheckler9739 10 месяцев назад

if you replace the wheel speed sensors for an intermittent advance trac problem, and then after replacing the ABS light and Advance trac light come on and stay on. What now? Plug old ones back in, light goes off *reason for replacement is intermittent problem during high104 degree temps and intermittent advance trac light.

@dwcoffey 10 месяцев назад

Thank you for watching, Timothy! I have received bad replacement sensors....check them against your old ones by testing resistance across the two contacts. Could be a bad replacement. If you have Forscan and a cable, you can tell which sensor is the problem.

@sopoelectrician 10 месяцев назад

What were the symptoms that led you to replacing the sensor?

@dwcoffey 10 месяцев назад

ABS errors on the dash. Thank you for watching!

@donniewillis2926 3 месяца назад

How do you determine which sensor is bad to begin with? BTW I have a 2012 F150 4 wheel drive.

@dwcoffey 3 месяца назад

Thanks for watching, Donnie! I used Forscan and hooked my laptop up to the truck for diagnostics. You can use a multimeter and measure the resistance of each one, usually this will allow you to determine which one is bad. You can also measure the AC voltage generated by each one when you spin the wheel. I hope this helps!

@nextrayallen1 10 месяцев назад

After replacing the sensor do you have to clear the code with Forscan?

@dwcoffey 10 месяцев назад

I did with my truck. Thanks for watching!

@nextrayallen1 9 месяцев назад

@@dwcoffey did you just clear the fault code or there anything specific you do to calibrate the new speed sensor?

@dwcoffey 9 месяцев назад

As long as the fault is coming from the sensor alone, clearing the code will fix the issue. If there are other problems, like the wheel hub, you'll have to fix that before clearing the codes.