Replace Garage Door Rollers and Reduce Noise

Подписаться 11 тыс.

Просмотров 134 тыс.

50% 1

In this video I will provide you with a very easy method for replacing garage door rollers. I give you step by step instructions for replacing your garage door rollers without removing any hardware. The method allows you to easily remove you old worn and noisy rollers and install your new Ultra-Life MAX 2 Nylon Ball Bearing garage door rollers with the use of a single, very effective tool. This roller replacement method is very easy and takes very little time. I will also demonstrate the noise reduction properties of the Ultra-Life MAX 2 Nylon Garage Door Rollers by taking before and after decibel meter readings of the garage door in motion. As you will witness in this demonstration, these nylon rollers are very effective in reducing garage door noise. The Ultra-Life Nylon garage door rollers featured in this video are backed with a lifetime guarantee.
~-~~-~~~-~~-~
Product Links:
* * Ultra-Life MAX 2 Nylon Garage Door Roller: amzn.to/2TI2h3I (US);
amzn.to/2P9dLx5 (CAN)
* * LiftMaster Garage Door Opener Vibration Isolator Kit : amzn.to/2I4sAQh (US);
amzn.to/34bhMW0 (CAN)
🟡 Subscribe: / budssmarthome
🔴 Buds Smart Home Website: www.budshomeautomation.com
🔵 Source Info and Deals on Aeotec and SmartThings compatible devices:
🛒- Amazon Store: www.amazon.com/shop/budssmart...
🟢 Amazon Links for Aeotec/SmartThings Devices:
🛒- Aeotec/SmartThings Hub: amzn.to/3hG653a
🛒- Aeotec/SmartThings Motion Sensor: amzn.to/3AklqOt
🛒- Aeotec/SmartThings Door Sensor: amzn.to/3hI48n2
🛒- Aeotec/SmartThings Water Leak Sensor: amzn.to/3klfHC8
🛒- Aeotec/SmartThings Camera: amzn.to/2XEjC4x
🛒- Aeotec/SmartThings Smart Plug: amzn.to/3lBpqE4
🛒- Aeotec/SmartThings Button: amzn.to/3kfDBiC
🛒- Aeotec/SmartThings Range Extender: amzn.to/3hDwLSn
🟠 How to support Bud's Smart Home Automation:
🛒 - Shop my Amazon Store: www.amazon.com/shop/budssmart...
💳 - Buy me a Coffee via PayPal: paypal.me/BudsHomeAutomation
🟢 Amazon Deals!
🛒 - Try Amazon Prime for FREE: amzn.to/2ZY8pN3
🛒 - Try Audible for Free : amzn.to/3oAVVW5
🛒 - Amazon Music - 90 Days for FREE: amzn.to/2WM2klA
🟡 Music Selections used in this video include:
Intro Music - “Happy Rock” at: www.bensound.com
Exit Music - “Take it Back” by Dan Lebowitz
~-~~-~~~-~~-~
DISCLAIMER: Some of the links in this description are Amazon affiliate links, which means if you click on a link to make a purchase on Amazon I may receive a small commission. You will not incur additional cost for using my affiliate links and your purchase will help support this channel. Thank you for your support!
CHANNEL DISCLAIMER
Due to factors beyond the control of Bud’s Home Automation’s and Repairs, aka Bud’s Odd Jobs, and (hereafter referred to as Bud’s Channel), I cannot guarantee against improper application, use or unauthorized modifications of the information provided in my instructional videos. Bud’s Channel assumes no liability for property damage of incurred injury as a result of any of the information contained in this video. Use of any of the information contained in this or any video produced by Bud’s Channel is at your own risk. Bud’s Channel recommends safe practices when working with power tools, machines, home electrical circuits or products featured in my videos. Due to factors beyond the control of Bud’s Channel, no information contained in this or any other video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the application of information contained in my videos is the sole responsibility of the user and not Bud’s Channel.
#GarageDoorRollers #UltralifeNylonRollers #NoisyGarageDoor

Хобби

Опубликовано:

13 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@jerkstore76 2 года назад

Dude, thank you so much for this video!, worked exactly like you showed. I can’t believe how more quiet and fluid the door moves up and down. I never really thought about replacing before.

@BudsSmartHome 2 года назад

I’m happy it helped.

@cwsosby7145 3 месяца назад

No doubt the best way to do this. I followed it to the T and it went very smooth in about 30 minutes for both 16 ft doors. Thank you for posting the video. I imagine this would cost close to $500 to get someone out here to do it for me. I think I paid $50 for the rollers.

@BudsSmartHome 3 месяца назад

Glad it helped😊

@pontiac1978 5 лет назад

WOW! Super Informative on how to do this! Never thought of using the Hammer to bend out an area. Thumbs Up!

@roadstardelta 3 года назад

Since you already bend open the track at one spot, you might as well use that spot to remove the rollers and replace them, one by one. No force needed with a the claw of a hammer to get rollers out. Only the very top one is done on the horizontal part of the rail, and you can slightly twist the rail to remove it and put it back. No need for hammer claws and force.

@BudsSmartHome 3 года назад

I suppose you could try that Roadstar Delta. I think you’ll find that it’s more difficult. The hammer method doesn’t require all that much force and I find that it worked very well. Thanks for taking the time to comment.

@f5fstop 8 месяцев назад

Yes.....

@TerryWysocki Год назад

Thanks for the vid, armed me with info to proceed! I varied the sequence though. After prying both channel sides open, I did the bottom rollers first, moving it to the opening I made and easily replacing it (while door was opened I also did the top rollers). Then I moved the door to put the next one at the opening and did both sides at the same time, while the door was in position. Worked great, easy job!

@BudsSmartHome Год назад

Nice job Terry. Good tip also!

@NeverLostRoamer 3 года назад

Thanks dude your tips worked GREAT I wish I would have watched your video first before watching the other videos.

@BudsSmartHome 3 года назад

Thanks for commenting. I’m glad the video was helpful.

@MWitt-bw7im 5 месяцев назад

I did this two years ago it worked great! Thanks for this video! 👍👍

@BudsSmartHome 5 месяцев назад

I’m happy it helped. Thanks for commenting.

@Alan-yd5pc 2 года назад

Thank you. This worked just as you demonstrated. I have an 18' x 8' Wayne Dalton.

@BudsSmartHome 2 года назад

Glad it helped Alan.

@richmondkelly4167 3 года назад

I watched your video several times, ordered the rollers, and completer the exchange in about 20 minutes! Absolutely spot on about how to swap out the rollers. Many times quieter now!!!

@BudsSmartHome 3 года назад

Thanks for taking the time to comment Richmond. Enjoy that quiet garage door. 👍

@jakechung9295 4 года назад

How smart you are! Awesome man! You have the same type of my door, so I can learn how to replace the rollers. Actually, my door has some problem with a hinge part. I can't disassemble it. If I do that, it won't hang on. So I have searched how to replace only the rollers, without any screwing the whole roller parts. Thank you, man! I appreciate it.

@BudsSmartHome 4 года назад

You’re welcome Jake. Glad I could help.

@jackponte3854 3 года назад

Amazing explanation. Thanks for sharing

@BudsSmartHome 3 года назад

My pleasure! Glad it was helpful 😀

@vrDarkone Год назад

Great video, thank you for sharing!

@BudsSmartHome Год назад

You bet!

@thebronzetoo Год назад

Great video! Easy Peasy!! I just did it and it took less than 30mins!!

@BudsSmartHome Год назад

Good Job! 👍

@jobrivera98 2 года назад

I wish I measure the noise too. It was a substantial difference. And replacement was easier. Thanks!

@BudsSmartHome 2 года назад

Yes nylon rollers make a big difference.

@Liftmaster-sw2zy 5 лет назад

I would also get a tube of Lucas oil products white lithium grease and lube the screw drive. That will make a big difference as well.

@papajoeknows8355 Год назад

Well done 👍🏻

@BudsSmartHome Год назад

Thanks Papa Joe! 😀

@twoweeledsoto6072 5 лет назад

I'll be trying this tomorrow or Monday. Looks easy when you do it. Let's see. I"m a little concerned with bending the channel back. I hope it's still a smooth transition after I bend it back.

@BudsSmartHome 3 года назад

It’s a lot more work to take the hinges off. My truck was very easy to bend out and to put back into place properly. No issues. Thanks for watching and commenting.

@anthonyrivera7815 Год назад

Awesome!

@BudsSmartHome Год назад

Thanks Anthony!

@farmerbob339 3 месяца назад

“Great Tutorial”, but unfortunately I have Steel Tracks that don't move like yours. So I ended taking off the middle hinges and dislocating the curves for the bottom rollers. Your video prepared me for what I may encounter. One tip I have recently seen, is to put "Heat Shrink Tubing" on the sloppy rattling roller shafts that makes them fit snuggly and not rattle at all. I have a couple of hinges that have a larger diameter tube for the Roller Shaft and it really rattles. This stops them. Why buy and install the best new Nylon Rollers if they are still going to make unnecessary noise?

@BudsSmartHome 3 месяца назад

Good Tip Bob. I have seen this as well and it is on my to do list! Thanks for taking the time to comment. 😁

@molliesdad4702 Год назад

Thanks for this information, it is just what I needed. Can you provide a link to the DB meter you used?

@BudsSmartHome Год назад

Hi Molliesdad. That app is no longer available. I am currently using this app: apps.apple.com/us/app/niosh-sound-level-meter/id1096545820

@RobertMacCready 3 года назад

We found that the top roller was a total PITA and it was so much easier to undue the screws and replace the roller...easy peasie.

@BudsSmartHome 3 года назад

Good tip! Thanks Robert!

@stephanlatta3733 4 года назад

I loved this video. When I went to check my garage door, I realized that the bend track actually fits over the horizontal and vertical track and thus don't easily allow for the bending of the vertical track at the joint. Do you have any other recommendations how I could easily replace the rollers with the track setup I have? Update: I saw in another video that you can bend a section of the vertical track about 12" away from the joint to accomplish the same exit/entry point.

@davelevy4394 3 года назад

One question I had was, why not lubricate the spindles on the new rollers before putting them on the door? And, should you clean out the part where those spindles ride, perhaps even lube them as well? Looking forward to your reply. Outstanding video!! I never knew it was that easy, and only 1 tool for the job. Many thanks.

@BudsSmartHome 3 года назад

Hi Dave. Thanks for your questions, which are very good, by the way. The bearings that I used and recommended are DURA-LIFT Ultra-Life MAX 2" Sealed 6200ZZ Bearing Nylon Garage Door Rollers, (see here amzn.to/3mBCuru ). The bearings come pre-packed with high-performance Mobilgrease Grade XHP 222 grease in bearing cage. The seal prevents dirt and grime from penetrating the bearing cage. Thus, no need for extra grease on the rollers. As for spindles, it is always a good practice to lubricate between the spindle and housing. I recommend a lithium spray using a application straw for full penetration in tight areas. I used CRC lithium grease spray, (here: amzn.to/34C1clk ) for this purpose, but any brand will do. Hope this helps?

@BudsSmartHome 3 года назад

Here is my follow-up video about properly lubricating your garage door to further reduce noise: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-e4rgtvGFGwY.html

@mtnbikerva1 Год назад

@@BudsSmartHome From my experience and knowledge it seems Dupont Chain Saver would be a FAR better lubricant due to cleanliness, and durability. Motorcycle chains are put through much more work, stress and harsh environments than a garage door. Please explain how and if I am wrong. Thank you.

@BudsSmartHome Год назад

@@mtnbikerva1 - This seems to be a sound suggestion. Personally, I have no experience with Dupont Chain Saver. Thanks for the tip! 😃

@genehanson573 Год назад

Great video, thank you for the instructions and me saving a bundle of $$$ from calling the garage door guys!!!

@BudsSmartHome Год назад

Thanks Gene. I’m happy the video helped.

@johnfeather5405 2 года назад

Thanks for the video. The company wanted $175 to change it. Rollers are $26.00 from HomeDepot .

@BudsSmartHome 2 года назад

A great savings for sure!

@marvin6148 3 года назад

Did I miss your final dB test, after the replacement work was finished? What was your average dB measurement then, please?

@BudsSmartHome 3 года назад

Marvin The after installation of garage door roller recorded at video segment 1:30 I realized a 10 dB reduction in noise overall. Also, by cleaning and lubricating my door, I realized another 5 dB reduction in noise. Video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-e4rgtvGFGwY.html. So with roller replacement, cleaning and lubrication I have a overall noise reduction of 15 dB.

@l337pwnage 4 года назад

You have springs, you just can't see them. If you put some heavy grease on those roller shafts while you're there, that'll help too.

@InvestmentInfo 3 года назад

What is the appropriate grease to use on the roller shafts when installing new rollers?

@BudsSmartHome 3 года назад

The garage door manufacturer specifies lithium grease. Product Links below…

@dickleis1332 3 года назад

Great technique! Some of the old rollers broke during prying process, but what the heck....they are getting replaced anyway. Otherwise, everything went smoothly. I would suggest as he does in a later video, apply some type of lube to the stem and hinge before installing the new rollers. I happened to buy the same replacement brand that he used and find them very quiet.

@BudsSmartHome 3 года назад

Hi Dick. Glad you were successful in your installation. Thanks for taking the time to comment.

@nighthawkj30A4 2 года назад

Do you have to bend the track? Or can your just unbolt one Bracket to the rollers at a time. And install it or is this not possible because of the weight of the door.

@BudsSmartHome 2 года назад

You can unbolt one bracket at a time, but this is a lot of extra work. It's much easier, and safer to bend the track. Note: if your torsion bar cable is attached to your lowest brackets on both side DO NOT unbolt those lower brackets until you have have released the pressure on the torsion springs. You can incur a very serious injury!!

@duanewaller7234 Год назад

awsome

@BudsSmartHome Год назад

Thanks!

@jeffamerrill 2 года назад

What decibel meter are you using on your phone? I looked in the app store but could not find that particular one.

@BudsSmartHome 2 года назад

Hi Jeff, I no longer have that app. It may have been discontinued.

@ralphnabozny8494 10 месяцев назад

thats kinda tricky. if you do bend it back to the same spot your good. nice touch.

@BudsSmartHome 10 месяцев назад

It's easy to do and a safer and quicker way to replace the rollers for sure!

@gtranquilla Год назад

My new rollers arrived today……However my double garage door is very heavy with heavy duty everything. It was not a simple job like shown in this video….vertical rails had to be removed because of extremely tight tolerances on the rails etc.

@BudsSmartHome Год назад

Did you get a reduction in noise level?

@gtranquilla Год назад

@@BudsSmartHome - to some degree……but still need to mount the two top rollers then grease everything with lithium grease. Old heavy wooden doors also require commercial grade springs etc. more noise in old heavy double doors.

@jacec5855 Год назад

I would say change the rollers at any cost, I saw the meter hit 80 dB and that's going to surly damage hearing over time.

@BudsSmartHome Год назад

Thanks Jace.

@CampRusso 2 года назад

🤔 what is the benefit of the affiliate link to the garage door spring loaded hinge?

@BudsSmartHome 2 года назад

Good eye Rich. Thanks for pointing this error out to me. I've removed those links as irrelevant.

@CampRusso 2 года назад

@@BudsSmartHome 😲😁👍🤣

@ldenorio 3 года назад

what app did you use for db test

@BudsSmartHome 3 года назад

hipidydipidy - The app is called Decibel X

@ldenorio 3 года назад

@@BudsSmartHome thanks for the reply

@DIYAroundTheHome 4 года назад

I'd recommend moving your finger next time, it seemed the way you held the phone might have got in the way from the microphone during the sound/decibel recording.

@BudsSmartHome 4 года назад

Good observation. Thank you.

@VictorSilva-rq4kz 3 года назад

This only works if there is a lot of slop between the wheel and the axle holder. In my case there was no play, the wheel was flush against the axle holder. So I had to unscrew the track from the wall.

@BudsSmartHome 3 года назад

Thank you Victor

@persiancucumber9255 Год назад

Wow your method was super simple thanks. 👍

@BudsSmartHome Год назад

You're welcome PC!

@diverdave4056 Год назад

but you neglected to clean the track - add a little lube to the new roller axles - lube all of the hinges and tighten up all nuts and bolts that hold the door together !

@BudsSmartHome Год назад

Good tips! 👍

@bigred4379 2 года назад

The problem with my track is this: Ive owned this home forever. I have always worked more than full time. So.. I’m usually not home when installations take place. Probably have had two new doors and a few new motors//openers over the years. Track is in excellent shape EXCEPT FOR THE BREAK IN THE TRACK. Where more than one person has OBVIOUSLY used your method of bending. I cannot tell you how many times I’ve had to try to re straighten that joint to get it back to smooth. Once metal is bent like that GOOD LUCK getting it back. If you dont, it makes for a noisy operation, WHICH is what we are all hoping to cure. BE CAREFUL MANHANDLING THAT TRACK. You may want to consider using the OTHER alternative, even though it’s a time consuming PITA: BUT BEWARE THE BOTTOM HINGE! COULD BE ATTACHED TO THE TORSION SPRING! Unscrewing the hinges to replace the rollers. UP TO YOU😉 My method? Call a pro, and be home when they’re doing the work so you can learn something👍🏽

@BudsSmartHome 2 года назад

Using the claw side of my hammer, I was able to get a controlled bend for a small opening in my track. The opening does not need to be very large to allow easy removal and insertion of the garage door rollers.

@bigred4379 2 года назад

@@BudsSmartHome agreed. I hear ya. However , thats YOU. Prolly a few joe shmoes gonna make a mess like that😳😁

@BudsSmartHome 2 года назад

@@bigred4379 - Yep. LOL!

@bigred4379 2 года назад

@@BudsSmartHome One day I had something laid out on the pool decking, trying to disassemble it when my pool guy ( a former plumber ) showed up. I expressed my frustration.. he laughed and gave me my favorite DIY QUOTE “ IF AT FIRST YOU DONT SUCCEED, GET A BIGGER HAMMER!” 😁😁😁that’s one from the plumbing trade. What do we say in MY chosen trade? ( cosmetology) “ WHEN ALL ELSE FAILS, READ MANUFACTURER’S INSTRUCTIONS” 🤣🤣👍🏽

@BudsSmartHome 2 года назад

That age old adage can be applied to just about any trade.

@anthonychase4945 2 года назад

That track looks all warped and cracked.

@lewinm00 Месяц назад

Yikes yeah this is ill advised IMO. Better method is to use pliers to bend out a portion of the track NOT on but maybe a foot below the bend so you can get rollers switched and bend track back to original shape.

@BudsSmartHome Месяц назад

Thanks for your comment. The bend using this method is very slight. It easily goes back to the original position. Many have commented that have used this method with no problems or issues.

@joshn7829 18 дней назад

This seems harder than doing it the correct way lol

@BudsSmartHome 18 дней назад

It’s very easy and much faster. Did you review any of the comments? One recent viewer posted this 2 months ago: “No doubt the best way to do this. I followed it to the T and it went very smooth in about 30 minutes for both 16 ft doors. Thank you for posting the video.”

@1agaragedoorssacramento Год назад

Most of that noise is coming from the opener

@BudsSmartHome Год назад

Thanks for commenting 1a

@braden165ks9 4 года назад

The door opener needs to get loop

@HazeTechHD 3 года назад

This is a terrible idea and can damage the track. Avoid this method.

@BudsSmartHome 3 года назад

It worked wonderfully for me. Very simple and easy and no track damage what-so-ever. Thanks for watching and commenting spotcom.

@jamaaljackson4488 3 года назад

Agreed!

@bigred4379 2 года назад

Yup. Ive got a bent track at that joint, and there’s no going back. Just call a pro to replace those. Observe how it’s done. Garage doors can be deadly if you get overzealous and are unaware of the dangers. ( ie, the bottom hinge connecting w a cable to the torsion spring) 😳🙀

@BudsSmartHome 2 года назад

Yes. It’s a very bad idea to try to remove that bottom bracket while is under tension from the torsion spring.

@Lexx.m Год назад

Что это за дичь? У нас за такое руки бы отбили, вся направляющая на соплях

@BudsSmartHome Год назад

LM, I'm sorry that you didn't find the video helpful. I believe that you may not fully understand the concept. Thanks for taking the time to comment and express your views.

@Concordeagle Год назад

Good way to ruin your tracks and reliability of the door.

@BudsSmartHome Год назад

Interesting comment, although untrue. To the contrary , my tracks and door are fine as you can witness in this follow-up video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_xrucvB537E.html which was produced in March of this year. The video you just watched was published on Feb 14, 2019. That was over 3 years ago.