@@SKARFACE5150k You will need a good ratchet handle and sockets set. Not remembering the sizes but since it a honda most bolts are 10, 11, 12, 14, 17 and 19. You also need a breaker bar, a sledge hammer, jack and Jack stands. Remember, to use a bungee cord to hold the brake caliper, do not leave it hanging by the brake line..... Whatelse? Oh yeah, the little rotor screws might be a problem when taking off the rotor, watch other video online to help with that....just be patient. Take off the wheel, then the brake calipers, then the rotor, then knock out the studs with the sledge hammer.
