Replace Thumb Heater Controls 2009 Ski Doo 600 800etec

Подписаться 8 тыс.

Просмотров 18 тыс.

50% 1

One day you look at your snowmobile and notice one of the little yellow toggle switches is missing. Could be the yellow toggle heated Handlebar button switch or the yellow toggle heated Thumb control block switch. If you are lucky enought to find the plastic yellow button after it popped off, you will quickly find out that you cant just press it back on - It wont stay. Replacing the LH Switch Housing on a Ski-Doo is relatively easy but the 600etec from 2009 is totally different than other models of Ski-doo snowmobiles and runs about $330USD for a new LH Switch assembly. Finding one used is a tough task, but this video will show you how to rewire any model or year Rev XP Switch cluster to work on the 2009 Ski-Doo MXZ or 50 Edition Snowmobiles.
NEW PART NUMBERS:
515176504 - LH Switch assembly $329.99
515175926 Housing Switch Plate $15.99
515176088 Start/RER Button $16.99
250000263 Torx Screw 0.95ea
SHARE YOUR PHOTOS/VIDEO LINKS on a future episode - email along with a brief story/description mailto:fanphoto@mudbrats.com (HAVE A VIDEO? Please DO NOT send a video file - just the link to vimeo or youtube)
#snowmobiling#elinq#ski-doo#officialskidoo#snowmobilevideos#mudbrats#skidoorepairs#switchblock#2009skidootips
Donate (Buy us a round): bit.ly/2KHTSuZ
• Mudbrats ADV Subscribe: www.youtube.co...
Join our Patreon Community: / mudbrats
Podcast: open.spotify.c....
----
We love hearing from you guys - leave a comment below

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@Teammizera Год назад

Hey I found you can use the broken switch!!! Under the “button” looking things that don’t move, the switch mechanism shifts left-right, using a small screwdriver it can be shifted so you don’t freeze your hands

@mudbrats Год назад

great tip - good to know in a pinch if u are on the trail

@farmboy_907 6 месяцев назад

Can you do a video on where the red kill switch hooks up to? I got the same sled and it didn't have a kill switch on the handle bar when it bought it and can't find any info on it and it want to put one on so it don't have to solely rely on the tether

@mudbrats 6 месяцев назад

unfortunately i dont have the 2009 skidoo snowmobile anymore

@anthonygosmer7342 2 года назад

What a great video!!! I have the same sled and the same problem. In fact I know at least a dozen friends with the switches popping off!! Ski-doo, WTF wanting $379.00 for that module. I figured the housing was exactly the same but they changed the male/female connections. Thank you so much for confirming this!!

@mudbrats 2 года назад

Yes all the XP have this issue.... Ours hasnt come off again so I wonder if they addressed that problem on newer machines

@bmack7762 Год назад

I bought just the face for 150.

@Spance-er 2 года назад

What do the switches do??????? Can't find any diagram of how to use and control the heated grips. Please and thanks

@mudbrats 2 года назад

One is for controlling heated Grip temp and one is for heated thumb temp

@Spance-er 2 года назад

@@mudbrats thanks for the response, and quick too, sick! What exactly does the top yellow switch do, right to left? Also is there a chance my sled doesn't engage the heat until I'm actually moving?

@Spike-ui6lu 2 года назад

So any left handed switch housing should be similar that you know of? Big spread in costs between years. Thanks

@mudbrats 2 года назад

yes the newer ones are the same.... and i know some people have out the Gen4 switch which is really cool

@Spike-ui6lu 2 года назад

@@mudbrats thank you. So I can just cut off the old and new connectors, reconnect the old connector to the new wires but in the color code you mentioned. No need to swap harness from the actual switch correct? Thanks again

@markmaciejewski9081 Год назад

There are replacement switches for sale on ebay.

@mudbrats Год назад

yes and any wrecker has them

@markmaciejewski9081 Год назад

I meant the individual buttons. So you don't have to spend $300 on the entire assembly.

@mudbrats Год назад

@@markmaciejewski9081 the buttons won’t stay on if the controller has broken mounts

@markmaciejewski9081 11 месяцев назад

@@mudbrats It includes a new mount

@lostonlongisland6845 3 года назад

i would love to buy the m/s button from the old switch!

@mudbrats 3 года назад

email me at fanphoto@mudbrats.com and we can work it out

@lostonlongisland6845 3 года назад

@@mudbrats perfect email should be coming

@Mlogdog 3 года назад

So was the new switch from a newer sled?? I have a 2009 1200 and just bought one from a 2012 and will probably have to do some switching around.

@mudbrats 3 года назад

Yes it was newer, but I think it was only the 600 that had the different plug on it

@Mlogdog 3 года назад

Ok yeah mine is a 2009 1200 and I got one from a 2012 600 coming. The plug does look different on the new one

@Mlogdog 3 года назад

So mainly just the plug for the kill switch will be the different one correct? The others just pull out of old control and put in the new controller right?

@p0vrc708 2 года назад

What’s m/s?

@mudbrats 2 года назад

Mode/Set button - Use it for changing whaty is displayed on the dash (rpm, elevation, spd, top spd, avg speed etc) - Also use to set Summer Oil mode - I have a video on that

@p0vrc708 2 года назад

@@mudbrats ohh okay lol I don’t have the premium gauge so that was the first I’ve ever seen that lol