Replacing "S" cam and bushings part (4 of 4) 

Thanks Steve, I just finished a new series on S-cams and brakes on an old neglected trailer. It's the last 5 videos on my channel at the time of this response.

I hope you do well with your own repairs. Thanks for watching.

Thanks for watching and commenting, and feel free to ask if you need help with your truck or anything that I do repairs on.

will do, i appreciate it

good to hear. Thanks for watching.

I know it's kinda randomly asking but do anyone know a good website to stream new series online ?

Thanks Sam.

Thanks Eric.

Thanks for watching Eric.

Thank you sir.

Thank you sir.

Thanks for watching.

Thanks John.

Glad to hear it helped. Thanks for watching.

I'm pretty conservative, I get more than a year out of the ultra blue. That window silicone that smells like vinegar is not what I like to use, and it would go bad before I use it up on gaskets, now, if I had an open tube of that and that was all I had, I would use that before I would make a special trip for the other one. Thanks for watching.

Thank you sir.

Thank you sir.

It probably is.

I used a 12 point 9mm socket. the rear one was SAE, forget size.

Hay opciones por traducir en RU-vid desktop o laptop pero no hay en el smart phone. un dia voy a poner un video por buscar los opciones. Gracias Nicolas.

Gracias por responder como le comento son muy buenos los vídeos que publica otra consulta tuviera un video don se hace el mantenimiento y reparación del brake chamber en cuanto a los diafragmas y los resortes para hacer el cambio y los cuidados gracias un saludo un saludo a la distancia

It's not easy, you probably need to take off the turbo, drain the antifreeze, and the oil cooler is above the oil filters and in an awkward place to work. You should be able to do it in a couple or 3 hours.

Yes you can as long as there's no sign of leaking.

Thanks Will. I'm going to cut a few clips out of this series to make some single videos to put up so you'll see the same footage with different titles for more videos but shorter, like changing the brake chamber, greasing a bearing, slack adjuster, etc.

I would put class 7 - 8 or semi in the title to make searches come up even better.

The title space is small but there is a "keyword" box in the RU-vid editor, I don't always use it but I can add or change it on any video anytime.

I just watched this whole video to see when I said that and didn't find it. Sorry I don't know where I said that, must be a different video. Thanks for watching and commenting anyway.

Probably $500

My mechanic told me about 8 hours for both s cams on one axle. That's why I'm watching the video.

Thanks for watching.

I'll find some somewhere. Thanks.