Reprogram 2 button remote fob 1999 Toyota Camry NOTE works on v6 2005 Camry Altiva 2 button fob too 

This was the method that worked on my R-reg 1998 Camry in the UK! Thanks mate from England

Thank you. With the drivers door left opened, these instructions worked perfectly on a right hand drive 2000 v6 Camry

I recently purchased a 2004 Camry with a broken fob. I bought a couple of fobs on eBay for $40 the pair and then followed your instructions. No specific security light went on but I went ahead and assumed it was activated and pressed the fob. It worked! I then followed with quick succession the second. Both indicators did flash. I had to do the process twice because I had three door unlocked and one locked. Just need to make sure all doors are unlocked and then press the unlock button on the new fob. It then activated for the three button configuration. Lock, unlock and boot. Super big thanks to you!!

Absolute madlad. Every other piece of info I could find on this must relate to the left hand drive models, from finding the key receiver and pressing button to cycling the lock and door countless times, then boom 3 key turns and done. Thanks!

you are a legend mate thank you.

Thank you Sir your a true gentleman just fixed my daughters car because of you. And you went through the instructions nice and slow did not have to replay over again. Good stuff. Cheers Steven

You certainly do a great job of sounding like an Aussie robot, but you got the job done clearly and simply so. . . upvote for you my friend.

Im also in Australia but i have a 1998 camry, cheers for your video being very clear but also quick and brief

You are a great man and saved me a $100. Thank you very much for your brief description.

To program 2 or more remotes you need to quickly press the buttons on each remote before the security light turns off. Do not hold the remote button down because that will just write to the same remote 4 times over. You can program up to 4 remotes. You have to do them all quickly before the security light turns off because it forgets all other codes each time you do the process.

Worked like a CHARM!!!! It was on a 1999 camry vienta wagon 3ltre v6 thankyou.:)

Hi mate Would u think key fob with 2 buttons programming lock and unlock will work ? Many thanks

I have same model, battery in fob was dead. I managed to open it and change battery. But car does not reckognize the fob. When holding the button simply nothing happens. Its a tough one, intrent did not help.

Your a top bloke Glen!

Hi, my original fob is broken. Do you know where can I buy a cheap copy, so I can programme the copy?

do you know how to break into this car... i left my key in the ignition. ..engine off dead battery...i have break in kit... just need advice

Hey buddy I use your advice and I solve the problem I’m very happy thank you very much great job

Thanks for your help just did my fob in my Toyota Camry 2000 .it worked great thanks. cheers Peter

Hi there, where did you buy the remote?

How many frequency of remote?

Bloody legend mate!

Hi Glen... could you do a video on how to reprogram a blank key for this same Australian built Camry??? Thanks

australian arnold

great video. thank you. one thing though, will not let me program more than one fob. any ideas?

Anybody knows where to get a new remote? Originals are around $85 and I am just curious if there is any cheaper option online or around melbourne Thanks

would that work on a 1998 csi camry

does this work for a 91 toyota?

could anyone tell me where i could buy a blank remote for my toyota seca 1999 model tks

Mate a 5sfe is a 2.2 not a 2.4 , that's a 2azfe and didn't come in that model .

It’s no work