Rescue Your Stamped Concrete: How to Fix White Sealer with Xylene

Подписаться 294 тыс.

Просмотров 100 тыс.

50% 1

Rescue Your Stamped Concrete: How to Fix White Sealer with Xylene - DIY Patio Repair!
Buy now!
Hard Hat amzn.to/47SBTJG
Full mask amzn.to/3HzkWJz
Half mask amzn.to/3OoaacG
Cartridges amzn.to/497EVLD
gloves amzn.to/4bjud6e
Sprayer amzn.to/42yJX1f
Welcome back to [Your Channel Name], your go-to guide for all things concrete care and DIY solutions! In today's video, we're tackling a common issue many of you have asked about - how to repair stamped concrete sealer that's turned white. Join me as we walk through a step-by-step process using Xylene to revive your stamped concrete and bring back its vibrant appearance. Let's get started on this concrete rescue mission! 🚧🛠️
🔍 Identifying the Issue:
We've all seen it - that frustrating white haze on stamped concrete sealer. Before diving into the repair process, I'll briefly explain why this happens and why Xylene is our hero in this situation.
🛑 Step 1: Test with Caution:
Safety first! Learn how to test a small area (1"x3") to ensure that Xylene is the right solution for your stamped concrete. This crucial step ensures compatibility and prevents any unexpected reactions.
💦 Step 2: Power Wash and Prep:
I'll guide you through the importance of a thorough pressure wash. Clean the entire patio, including control joints, to create a clean canvas for the repair. Allow the concrete to dry completely before moving on to the next step.
👷‍♂️ Step 3: Safety First, Always:
Put on your respirator and safety gear - we're about to handle Xylene. Safety is paramount during this process, and I'll walk you through the precautions to ensure a secure DIY experience.
🌬️ Step 4: Xylene Application:
Fill your pump sprayer with Xylene, pump it 20 times, and get ready to revive your stamped concrete. I'll guide you on how to start spraying from the perimeter, working your way out from the farthest point for even coverage.
⏰ Step 5: Patience is Key:
Allow the Xylene to work its magic for 30 minutes to an hour. I'll explain why patience during this drying period is crucial for achieving the best results.
#StampedConcreteRepair #XyleneFix #ConcreteSealerIssues #DIYConcreteRescue #PatioRepair #ConcreteMaintenance #HomeImprovement #ConcreteRestoration
👍 Subscribe, Like, and Share:
Ready to rescue your stamped concrete? Hit that subscribe button, give this video a thumbs up, and share it with anyone dealing with white sealer issues on their stamped surfaces.
Thanks for joining us on this concrete repair journey. Let's bring back the life to your stamped patio! 🏡💙
Dear Concrete Enthusiast,
Are you ready to elevate your concrete game and unleash your creativity? Look no further - The Art of Concrete is here to inspire, educate, and transform your projects into stunning works of art!
🌟 Why Subscribe to The Art of Concrete Newsletter? 🌟
Exclusive Tips and Techniques: Our newsletter delivers insider tips and cutting-edge techniques straight to your inbox. Whether you're a seasoned pro or just starting with concrete, we've got insights to take your skills to the next level.
Inspiration Galore: Dive into a world of concrete creativity! Get inspired by jaw-dropping projects, innovative designs, and success stories from fellow concrete enthusiasts around the globe.
Hot Trends and Industry News: Stay ahead of the curve with our updates on the latest trends and developments in the world of concrete. Be the first to know about game-changing products, technologies, and design approaches.
Ready to embark on a concrete adventure like never before? Subscribe to The Art of Concrete Newsletter now at www.theartofconcrete.ca and let the creativity flow!
Don't miss out on the latest trends, tips, and exclusive offers - become a part of our vibrant community today.
Here's to unlocking the limitless possibilities of concrete!
Best regards,
The Art of Concrete Team
www.theartofconcrete.ca
Subscribe to our newsletter for giveaways valued of over $10,000.00. go to www.theartofconcrete.ca also industry news and upcoming trends.
Looking for concrete contracting services? we serve
Kitchener-Waterloo, Cambridge Guelph and surrounding areas
Driveways, patios, sidewalks, steps, floors, all finishes
Thank-you for watching, if you have any suggestions for future videos please comment below. I can make the following in cement / concrete; trays, planters, jewellery, countertops, parging, repairs, stamped concrete repairs, exposed aggregate repairs, sealer or coloring repairs, broom finished repairs, I can also create videos on poured concrete finishes such as stamped concrete, exposed aggregate, broom, and swirl finishes, borders bands, inlays, sealer applications and more.

Опубликовано:

20 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@zachhaines3028 Год назад

Does Xylene also work to remove water based sealer?

@hulkhuggett 10 месяцев назад

EXCELLENT video!!!

@user-ub8jg4xn9i Год назад

I used a solvent based acrylic high gloss sealer to reseal my stamped concrete porch floor. In front of my fireplace, I didn't get the sealer rolled out and found a 6 - 12" band of pure haze the next morning. I wiped xylene on with a cloth and the haze disappeared. Do not wipe the rag across the treated area more than once! It turned out perfect. Thank you for the video.

@theartofconcrete 4 месяца назад

Wow thats so good to hear. Is there anything else I can create the might help?

@manuelsaldana2730 2 года назад

Beautiful

@lorinkenfield6937 2 года назад

Great job! Our stamped and stained concrete deck really has some white patches around the stamped indentations . We put xylene on with a roller! We still have the patches. Some are gone , but not all. Any suggestions?

@karenmiller6088 3 года назад

Okay this might be a stupid question but, what's the leaf blower for? I didn't see you use it.

@Jimigiller1 3 года назад

Great video. I put down an acrylic solvent sealer 2 years ago, on a concrete paver patio. It’s a non wet look acrylic and just makes the pavers look grey, it’s also milky white in some places. Looking to remove the acrylic and leave for a year before putting down a wet look sealer to bring out the color of the pavers. If I use Xylene as you’ve shown, would I pressure wash then to remove the acrylic, maybe agitate with a brush to loosen? Have pets so not super excited about xylene but not sure I have a choice. Thanks for your help!

@theartofconcrete 3 года назад

Hey thanks for the response. Xylene works for a quick fix. I have done this experiment a few years ago. The Xylene drys under 2 mins. I tried a pressure washer with spray Xylene but as soon as the water got on the sealer where I was going to Xylene it wouldn't penetrate. The water acts as a neutralizer. Try to get your hands on a pail of "strip this" imo technologies.

@irahemtulla Год назад

the last time i had used Xylene to reactivate the sealant, it worked great. But I noticed that the Oring on the Pump git compromised.

@wayne4162 Год назад

GOOD TO KNOW

@stevensgordan5998 2 года назад

That pressure washer is hilarious.

@theartofconcrete 2 года назад

I know right haha

@gabrielawells2001 2 года назад

Hello we used some sealant from a few years ago and it came out white and hazy. We bought some other sealer as we ran out and that portion looked great, so my husband bought some more of 2nd sealer and thought it would take the white hazy look out, but it didnt go away. Could we try to apply xylene over the freshly sealed driveway?

@mouseketeer606 4 месяца назад

Does xylene work for water based sealer that has sand trapped between it and the pavers? We need to remove the sealer & sand.

@mahirkallabat581 Год назад

Can we use a garden sprayer or do we have to use a roller? I don’t have what you used, but I do have the same issue with my stamped concrete. What will Xylene do? If I use a power-wash to wash my patio before applying Xylene, how long should I wait before I apply?

@Reclaimer77 2 года назад

I just color stained my concrete pavers and then sealed them. They looked great! Two days later it rained and now there's milky white areas. It's terrible! If I use your Xylene method here will it damage the color stain?

@Rob-ob3sh Год назад

Will sealer go bad as I have some in a can which is over 8 years old. Can I use it or should I just buy a new can and get rid of the old stuff? Thanks great channel

@toddroy9558 2 года назад

I sealed mine, and then it rained before it could dry, leaving little white spots. Would spraying the xylene and then put my second coat be ok and get rid of the spots?

@daddypapi3842 2 года назад

Great job! Do you recommend brushing the xylene instead of spraying it? I tested by brushing the xylene on a couple of pavers and it removed the white haze. Also, how long will the xylene last? Thank you.

@mountainviewcattle 3 года назад

Cool video. In addition to wearing the respirator I would recommend wearing your pants over top of your boots instead of tucking them in. That way you will prevent any chemical splashes or debris from getting down into your boots and contaminating your socks and feet. Those pants would go over the boots tight and give you a good seal to stop stuff going down your boots. In your next video can you try wearing them that way and let me know what you think?

@theartofconcrete 3 года назад

Thank you! I appreciate your feedback. I'll consider it on my next video. Possibly get safety coveralls

@mountainviewcattle 3 года назад

@@theartofconcrete Yes coveralls would work great over your rubber boots for sure. I have multiple pairs, some for summer and some for winter. Even if you're not wearing coveralls though you should start by throwing your pants over your boots. I always wear mine over my boots and find them better that way. I'll look for it in your next video.

@badger36fan 3 года назад

Thank you for this video. Is there a temperature range that the xylene should be applied? How long before foot traffic and placing furniture?

@theartofconcrete 3 года назад

Above 10 degrees Celsius but up to 27. It drys within 20mins but be sure to leave longer and check if it's tacky prior to use. Thanks for the questions

@tylerwillison4962 Год назад

Awesome results. I think I got a little too much sealer on. I’ll try this.

@jimboreaddabible777 4 месяца назад

How did it turn out? I feel like I have the same issue.

@theartofconcrete 4 месяца назад

Thanks great feedback 👍

@vanessah1499 3 года назад

Did you just apply xylene? I noticed you did not broom in not power wash. If you did power wash, did you rinse with hose afterwards?

@danielmcnulty5035 8 месяцев назад

Do you recommend back rolling or just spraying?

@michaeljohnston2636 2 года назад

What brand(s) of xylene is best to use? Or is xylene simply xylene therefore it doesn’t matter?

@dksellou Год назад

Hello I recently resealed my stamped concrete. However, the part of the patio which is exposed to sun and rain ( not covered by the roof) , still has spots that seem like there is no sealer or less sealer than the covered patio (white areas that are not as dark as the rest). Does this mean I didn't apply enough or I applied more than I should? I was told to apply 2 coats both thin, (1 gallon per 400 square feet for the first coat and 1 gallon per 300 square feet for the second coat. The first coat I applied it with the sprayer having my wife using a roller behind me, and the second coat I applied only with the sprayer. It's been 1 month now and it shows some fade areas on the exposed to the sun/rain area of the patio. I mean, is it normal to fade? I would expect to last longer ( I used the expensive sealer Armor AR350). QUESTION: After 1 month, will it be stupid to wash this faded spots/parts of the patio and reseal them again using a roller? Or instead of sealer I will need to pray with the Xylene as you do? I am so confused...

@sundown798 2 года назад

Appreciate the videos. Are you spraying over water based or solvent based sealer? Also of the 2 types what do you recommend? Thanks!

@theartofconcrete Год назад

Good question. This is acrylic sealer and applying xylene to neutralize the moisture. I don't know if it would work on water based. Acyrlic based sealer such as super diamond shine is one of the best.

@socal4tube 2 года назад

Thanks for the video. In California, xylene is not being sold. Is there an alternative? Thanks

@rbshuman42 2 года назад

If it has never been sealed do you use xylene first before sealing?

@jimboreaddabible777 2 месяца назад

Does anyone know... Do you let xylene evaporate or do I need to rinse off? I'm assuming evaporate.

@tomcaflisch7905 2 года назад

Would have been nice if you showed us what it looked like after the xylene dried all the way.

@theartofconcrete 2 года назад

Check it out on my website Www.theartofconcrete.ca

@Tuckercashthecorgi 3 года назад

Question for you… just had a new concrete patio sealed and after there are what appear to be water spots all over…..our guy says he’s never seen that happen before….wonder what may be the cause and also any suggestions on how to make it a consistent look.

@willchristie2650 2 года назад

It is called efflorescence. Many videos about this. Your guy is not being truthful. This is a common problem with concrete surfaces.

@ElMachoPrieto83 Год назад

How many passes do you do with the zylene

@mattkiner5419 3 года назад

Great video. My stamped patio had an area that turned fairly white last summer, and I thought maybe the acrylic sealer had worn there. I applied more to that area and it turned milky/dull, although not right away. The area was overly shiny at first. Would xylene help or should I strip it all and redo. It's sealed with SDI Stamp Seal.

@theartofconcrete 3 года назад

Great question. Do you want it less shiny?

@mattkiner5419 3 года назад

@@theartofconcrete well the area that I doubled up with sealer was very shiny for weeks but then got dull and whitish, sort of cracked looking. Resembles the patio in your video. Thinking xylene might be worth a shot before stripping and redoing the entire patio.

@lonbuckley2263 3 года назад

Do you just apply the xylene and walk away? Do you wait for it to dry? Should you rinse it off after a certain amount of time?

@theartofconcrete 3 года назад

Yup apply the xylene on a clean surface and watch for wind debris as it will set up quickly. The sealer is only liquid for max 30 secs. You should do it on a dry day, rinse an hour later but not needed

@jeffreymelton2200 8 месяцев назад

So the last little bit of the video was the finished product after it dried right?

@theartofconcrete 8 месяцев назад

Yes

@1aspirefit 3 года назад

Thanks for the video! What do you recommend if all the sealer is gone. Do I just pressure wash and then reseal with a spray can? Thanks

@theartofconcrete 3 года назад

I'd leave it. Sealing requires maintenance

@theartofconcrete 3 года назад

If all the sealer is gone you can also reseal

@derekjlight 6 месяцев назад

Any substitute for Xylene? It is illegal here in the state of NY.

@keilio12 Год назад

How long do you let it dry before applying xylene ?

@tonymangano9546 Год назад

can i use a roller to apply xylene?? if not can i use a plastic pump sprayer??

@jamescaricola6439 2 года назад

I just did about 700 sq ft of these really nice red pavers. Used glaze and seal wet look. Lacquer base and while 90% came out as desired one section of the yard the whole left side from back fence to house about 30 feet long 1 ft wide just started to cloud and haze. I could tell working on this property for a few days, I was pressure washing then sanding and finish sealing. Anyway I could see the problem area took much longer to dry. I waited and even used some heat guns but still it’s no good. Would you suggest I follow your video and real seal that area or do I have to start back at square one and strip it all? How would you tackle this ? Disclaimer I was paid in full and have done this now 4 times and this only time where it happened. I want to do the right thing by this family and appreciate the help. Regards jimmy

@tobychalmers8103 11 месяцев назад

Hey mate. Not sure where you live exactly and what the weather is like. If you can, wait consecutively warm/hot days in a row and give the area a xylene wash/ roll. Reactivate the sealer and the warm day should help release the moisture as you have allowed it to escape. This guy would know though! Good luck bro ✌️

@bvknarula 3 года назад

Great channel and video was very helpful. Question: I had my stamped concrete sealed last year and it has a bit of white chalky look, but also seems like the colour is really fading in a few areas. Its like the sealer doesn't even exist on those areas anymore. Should I apply xylene or just coat with new sealer?

@theartofconcrete 3 года назад

Thanks for your feedback 😀 if the concrete is hazy white xylene will remolsify the existing sealer

@bvknarula 3 года назад

@@theartofconcrete it worked out great

@keithgardner3148 2 года назад

Did you wash this off after or just leave it?

@ReMiXCaMeRoN 3 года назад

I tried to seal my concrete last year and it rained the day after and made while Marks and thick white ‘glue’ type stuff in all the lines. Same design as this. So I know I need xylene to strip it off. Just to make sure... jetwash the concrete so it’s clean, leave to dry. Then use xylene, leave to dry, then I can apply sealer again the day after.

@theartofconcrete 3 года назад

The white haze will show up a within a few hours or 24hours. If the white haze shows later it maybe a bigger concern. I wouldn't use xylene to strip the sealer, "strips this" is the best product for stripping sealer. I'll be posting a video on this in the coming weeks. Thanks for the question

@livinglife69 3 года назад

"Strips this" or "strip it" product is discontinued. I'm gonna try spraying on the Xylene on my cloudy patio tomorrow. I'm gonna let it sit for a 24 hours and see if it takes away the milky look. I did use Xylene to strip a 3x3 foot section of my patio and then I pressure washed it off. It does work to strip off sealer. I prefer not to strip the whole patio if I don't have to. Guess I'll find out. I also researched a ton online and I couldn't find anything else besides Xylene that strips solvent-based acrylic sealers.

@chrissimpson9272 3 года назад

I've got an acrylic solvent sealer on my grinded concrete alfresco, there is some minor roller blemishes in areas that look a little darker and shinier in different lights, also some bubbles in some area that the sun was exposed to while drying. Do yo think I could give it a spray with xylene to reactive the acrylic? Also wold you recommend a light roll after spraying if its the way to go?

@theartofconcrete 3 года назад

Hey good question. Is the concrete outside with very good ventilation? If so yes a very light spray of xylene will work. Roller will only pick up the existing sealer, I wouldn't roll. Sprayer does a good job. Be safe

@chrissimpson9272 3 года назад

Great thanks, would you recommend spraying the whole area for consistency or just the affected areas. By light spray just the same as per your video? Thanks again

@jisaac8941 2 года назад

Does this work on pavers? I have one spot with the white chalky look like you have their. would I apply the same method as you on that one spot or the entire area and just leave it to dry?

@theartofconcrete 2 года назад

Hey I would give it a test. Try it on the worst area 12"x12"

@jisaac8941 2 года назад

Thanks and once the areas dry it should get rid of the white and match all other pavers that did not get treated with the xylene correct

@ericmoreno655 3 года назад

We had our patio done in 2016 and in late 2019 I tried to reseal it for the first time but within a month parts of the patio developed milky white patches. What do you recommend I do? Should I try this method or should I try to strip and re do??

@livinglife69 3 года назад

The same thing happened to me. I acid stained and sealed it my patio. The sealer turned milky white. I used Xylene to strip a small are about 3'x3' and I pressure washed the sealer off in that area. The Xylene turned the stripped area real dark. Tomorrow I'm gonna try just spraying the Xylene on and letting it sit like he did in the video. Hopefully it will work like he says. Guess I'll find out tomorrow.

@jamespratap4922 3 года назад

@@livinglife69 how did it turn out? I was going to start mine in a week. Thanks

@livinglife69 3 года назад

@@jamespratap4922 It came out pretty until i sealed it. The sealer didn't take to the patio and turned out milky white on top of the stain. I had to buy Xylene and totally strip the sealer off the patio. Took me 4 1/2 hours. Don't use HC clear sealer from Lowes. I re-stained the patio to get a darker look. Came out great. Don't think i will seal it though. Me and the wife like the matte look without the sealer. I also did our entry way to our front and walk to the drive way. That came out good as well and the sealer worked fine in that area thank God. My wife was like "You should do the whole drive way". Hell no! I'm done with this project for now. If your going with a dark stain I recommend doing a 1 part stain to 2 parts water. If it doesn't come out dark enough you can always stain again when its dry. Good luck James.

@fedorpravov5372 2 года назад

@@livinglife69 " used Xylene to strip a small are about 3'x3' and I pressure washed the sealer off in that area." Did you use pressure wash immediately on the area which you had treated with Xylene?

@jayzee9273 2 года назад

Xylene isn’t used to strip sealer as Chris mentioned. Xylene is an emulsifier which should reignite the sealer to come back and reseal to the surface. I hired someone to reseal my patio and after a beautiful finish it tuned milky in patches. Cause: I don’t think he waited to fully dry before applying the sealer. Gonna try xylene over the affected areas

@vanessah1499 3 года назад

Also how would cracks on stained concrete be repaired ? Could someone help ?

@living9377 3 года назад

I would like an answer to that question too

@vanessah1499 3 года назад

@@living9377 I found a product on Amazon called Killer Crack Filler. I think it's great!

@Ritzi66 2 года назад

Ask my girlfriend .. she knows everything

@loganconnally4361 3 года назад

Use nox crete sealers and your good for 25 years…

@bbshoney 3 года назад

I hate the color of my existing stamped concrete. Is there any way to change the color of it? How would I go about doing this?

@theartofconcrete 3 года назад

Hey yes absolutely. I will be loading a video up on this

@theartofconcrete 3 года назад

The product is ez-tique

@powderfinger6597 3 года назад

When your patio looks like this you should really sandblast old sealer off.

@theartofconcrete 3 года назад

Thanks for your feedback, sandblasting will remove the cement off the surface of the concrete, leaving an exposed stone look. There's a product call strip this and it works well for removing sealer. This wasn't to the point of stripping.

@jons2304 2 года назад

@@theartofconcrete do you have a link to this product called "strip it"?

@scottpratson7766 Год назад

You don't need xylen for like a Bear product do you???

@jameshappl608 3 года назад

If you did not seal it then what did you spray on it also why did you only use the xylene around the perimeter of the patio. Thank you

@theartofconcrete 3 года назад

Hey James, xylene was used on the entire patio to remolsify the existing acyrlic sealer.

@eirahzakaria1938 3 года назад

After a few months.. turned white again or not...I wanted to know

@theartofconcrete 3 года назад

Great question!. No white haze will not reappear on this patio. Depending on the concrete and if there's moisture present results may differ.

@yaksportfishingnateconley4888 2 года назад

Did you show an after pic? Did it stay glossy like that or does it remove the sealer and go back to the way it looks when it was first stamped? (Matt finish)

@jeradschmit672 Год назад

No back rolling?

@theartofconcrete Год назад

Xylene drys to fast for paint rollers.

@shawnmellott5183 6 дней назад

🎉

@vanessah1499 3 года назад

Where are you located ? Would you be available to work on my concrete patio?

@theartofconcrete 3 года назад

Hello I service the #kitchenerwaterloo Ontario Canada area

@serafinsilva1055 Год назад

Are you aware of any xylene substitute? We can't get xylene in the People's Republic of California.

@theartofconcrete Год назад

Hey you might be able to use acetone. It drys very fast. I've heard paint thinner may work. I'd always test an area and follow local safety and bylaws.

@jeffspenceley7175 3 года назад

I used Xylene to try and strip my sealer off my stamped concrete because I have way too much on. I went to pressure was it after applying to a section of my patio, but it just clumped up. I can’t find this product, Strip This, you recommend. I see a product called Strip It...is that what you meant or do you have a link to Strip This? Thanks!!

@jeff_9074 3 года назад

I'm in the same boat. There is a video I referenced from Windy City Steamers on here, but I just purchased Xylene from Menards and pushed it around with a brush in sections. Then use concrete surface cleaner to clean it off. Just gotta make sure the pieces of sealer coming off get off the patio before it dries otherwise it starts harderening back on the patio in gritty little pieces (would have been nice to have known that before I started). I think the other thing is a good gas powered pressure washer. I rented my equipment and it was a max of 2700 psi. The minimum psi for the surface cleaner is 2,000.. but at 2700 psi, I think a higher psi would have been even better. I used about 3 gallons of Xylene on my 500 sqft patio. It got about 85% of the sealer off, which I am happy with. I might tidy it up by by rolling some more Xylene and spot treat some areas before sealing.. This time I purchased a quality more expensive sealer (AR350 by foundation Armor). I was using big box store sealers and it always turned milky, and flaked within the year.. hope this helps. Stripping the sealer has been a lot of work!

@jeffspenceley7175 3 года назад

Jeff _ Yeah, I used a gas pressure washer with 3300psi. The Xylene just made it clump up & I got sealer all in my decorative rocks around my patio when the water, xylene, & sealer was washing off the patio. I’ve just made a mess & I’m looking for a good product to strip all the sealer off & start fresh. I now know that Xylene is good if I want to freshen up my sealer after a few years to bring it back to life, but it sucks to actually strip the sealer off...it just makes a huge mess.

@loganconnally4361 3 года назад

@@jeff_9074 nox crete deco-peel and either sparkle seal or Stifel GC, both nox crete products