Resistor SMD Code 

Thank You. You made the most sense so far in just about 3 minutes.

Excellent! Informative and short video. Thanks!

wow this is so important detail thank you for uploading this it really helps my assignments

Perfect explanation, thanks!

Resistor SMD codes and code schemes very well explained, thank you !

You are best in terms of giving content

Very helpful and clear! Thank you! :)

Fantastic job

thanks one question does it matter wich way the currant flows through them ?

Will our multimeter's read these resister directly,or do we need smd fweezer meter, or how about scr meters,which is best to test these resistors with anyone

Good job

Thank you sir for sharing your vedio.. God bless.

Big Thinks 🙏🏻♥️

I'm glad I've never encountered that EIA numbering system. Needless overcomplication.

Hola, muy buena información. Consulta tengo una resistencia smd con el siguiente código x10? Como no trataron este código querría saber si es de 10 0 de 100 ohms. Saludos

Excellent. Thank thee :-)

nce tutor!!👍👍👍😀

Thank You!

thanks how to know the difference between MSD capacitors and MSD resistors if they have no letter or number how to know if these parts are broken how we know the value of them , I have similar MSD capacitors and resistors on mini STB powered by 12V and I found 2 are broken but I didn't see any number on them any help where can I buy them thank you very much

muy buena información aunque un ya tenga conocimiento sobre esto siempre hay cosas que todavía uno no sabia

thank you

nice video

The smd resistors can be calibrated, but must not be removed. Power banks calibrate the 200 and 000 types. The trick is solar charging or and car charger (5.8v). The calibrating may take for weeks. Doing this, a car user can benefit using a power bank, while others will not be able to use it with higher capacity and faster charging. Calibrating to5.8 v will be better at 5.0 v as well, and the supported best charger is Samsung or Apple.

I saw some resistors have not any code. So how can I find code for them ?

how find 2RD SMD capacitor ?

Me gusto por claro como saber los ohms de las resistencias superficiales de precisión..

I have a backlight inverter from an LCD TV and it has a slight burn mark on the back of the inverter board, on the other side there are four resistors with 0's on them and one looks burned. They are all connected to the same trace. Would it be ok to bridge that part and bypass those resistors? I'm assuming that the 0 on the resistors means no ohms of resistance which is basically like direct connection. I was going to scrape the trace which are thick and solder a wire onto them and connect the two.

47-16L (2) BD diode or resistor or capacitor...????

What value of 7D0 SMD?

Sir, what will be value of 0805 SMD, ?

Very well ,......tj. de ecuador.

WOWW.... NICE, GOOD, BAGUS, MANTAP....

SIR, what value of 0805 SMD ??

Thanks

Why not put the exact values for easy identification or reading? Just like in color coded Resistors.

thanks

Excellent. It was exactly what I needed. Thank you. At 1:55, "deviated," the first "e" is long, not short, "dee," not "deh." At 2:25 and other times, "represents," the first "e" is short, "reh," not "ree." Respectfully submitted.

So 103 and 1002 basically same, right?

what if the resistor doesn't have a code or any other letters

Thanks for the video. I need to change a smd resistor, code R050, is 0,05 ohm.

01c and 30c how read method plz tell I waiting your reply.

What does L35 mean on a SMD fuse?

what is the value for 183 with underline ?

great

Good

sir how to check 10k resistance

what is the messure of zero smd resistor, it is reversing or infinity when i use a digital multimeter

and the t code ?

010 direnç nedir ?

You much too quickly glossed over that whole "underlined" thing (and did so after presumably being done talking about 3 digit codes), which can cause a huge error when looking at 3 digit codes...

331???

what is a 0 ohm resistor used for?

SMD PTC A How to find out plz sir

4digit resister390e

hello for this vedio, but 382 O means that 0.328 KOhm not OHM

How to measure 20k ohm ? I got mad

sir smd rasitar mospid diod ki pahchan kiase kare

Why they make it hard, why not just write it "3k1" instead of "312". Who on earth would think "233" means greater than "312"? And if they can write that small, why though hole one still use color?

alguem tradus ai,.

thanks for u send with me resistor code dedails

Resistor SMD Code

"SMD" LOL.

lol.......omg sry bud...

That EIA-96 look up table system was designed by a lazy hack outfit. Why have a system that works from memory when it can be replaced with a lookup pocketbook chart instead? Who came up with this garbage? Add a color multiplier band and you have it,