Тёмный
No video :(

Restoration and Repair of an old German Compass. The most Beautiful compass STAND. 

Restoration In The Back Room
Подписаться 89 тыс.
Просмотров 514 тыс.
50% 1

I found this old German compass at a flea market. There were no identification marks on it, only one inscription in German: "VEB Geräte- und Reglerwerke Teltow" I could not determine the year of its release, if you know, write me about it in the comments.
The compass was outwardly in fairly good condition, although rather dirty, with various stains. Several brass screws were missing, the compass fluid was missing, and the compass itself was misaligned. I don't really like the Bakelite look of such an interesting thing, so I decided to repaint it. Pre-cleaned the entire surface with fine sandpaper, and then degreased. Painted in three layers with drying.
I also made a stand for the compass, with the possibility of free swing.
The most difficult stage of the repair, for me, is filling the compass with liquid. The outlet is very small, and the displaced air greatly interfered with pouring liquid into the case. I poured an alcohol solution into the compass so that it would not freeze. It took quite a while, especially to get rid of all the tiny bubbles.
But I still really enjoyed working with this interesting thing, and I also liked my compass stand, now it sits very nicely on the shelf with the rest of my finished projects
Take care and see you next week. Sincerely, Max.
#restoration
#awesomerestoration
#asmr

Опубликовано:

 

24 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 270   
@jamesfield5346
@jamesfield5346 Год назад
You restorations are beautiful but your sense of humor and sarcasm are top notch 😅😅😅😂😂. I love it
@lnwolf41
@lnwolf41 Год назад
Overall, very well done, though the inside of the compass should of been black, so that the dial could be seen easier in the dark, with no light reflection at night.
@val9489
@val9489 Год назад
Dirty work. The internal perfectionist of mine is crying.
@swdis00
@swdis00 Год назад
Slecht en veel te ruw herstelwerk. Dit had veel mooier en netter afgewerkt kunnen worden. Jammer
@subtext9881
@subtext9881 Год назад
'VEB Geräte- und Reglerwerke Teltow' is indeed the identification of the manufacturing plant. 'Teltow' is the actual place of the factory, located on the outskirts of Berlin. 'VEB' means 'Volkseigener Betrieb' roughly translating to 'State owned business/company/firm'. What it means is, that it was made before the reunification of Germany in 1990 in east Germany (GDR / DDR). It is an analogue pilot boat compass. It would have been integrated into a navigation post on the bridge of any decent mid size boat. The ones I know of were attached to a cylindrical housing about waist-high and in such a way that it could spin / rotate on all free axis. These were mass produced and exported or used by other Soviet aligned states. It is a nice piece you got there and it turned out well. Good work! Greetings from Germany.
@mikethespike7579
@mikethespike7579 Год назад
Yep. And that also means anything with "Made in West Germany" printed on it is at least 32 years old. Like some of the parts on my ancient BMW motorcycle.
@bobmetcalfe9640
@bobmetcalfe9640 Год назад
Was it military? I only ask because it''s rather nice brass work, and I know from my father that brass work was painted over on ships in wartime. Saved him a lot of polishing.
@seanlathbury5410
@seanlathbury5410 Год назад
I’m sure you already know this but the reason it was black was to reduce the reflection and make it easier to see when you’re actually on a boat
@diegosalgado2749
@diegosalgado2749 Год назад
This is a amazing naval/maritime Compass. The two axis allows the compass to stay stabilized even in houghest seas. Congratulations for the job, its awesome!!!
@HelloAdam_
@HelloAdam_ Год назад
Interesting!
@user-zg9ht7xu6j
@user-zg9ht7xu6j Год назад
Разобрать и покрасить..вау. Ожидал большего от вас👍🏻
@user-zg9ht7xu6j
@user-zg9ht7xu6j Год назад
@Де А посмотрите канал моя механика(на английском) и оцените его подход к реставрации чего бы то не было.. данное видео нельзя назвать реставрацией
@RagingMotoRiders
@RagingMotoRiders Год назад
@@user-zg9ht7xu6j my thoughts Exactly. His attention to detail is much more.
@jessezamora5777
@jessezamora5777 Год назад
Great talent you have and amazing! Like to watch. Good luck 😸🤞
@awdgt2stinger270
@awdgt2stinger270 3 месяца назад
So many comments already so forgive me if it was already mentioned, but it needs to be filled with fluid. Mineral spirits works well. Great job on the project, I did one a few months ago.
@ITBR_Restoration
@ITBR_Restoration 3 месяца назад
Hello. Thanks for your comment. I switched to your channel and was surprised. Your Stinger is pretty fast!!!
@awdgt2stinger270
@awdgt2stinger270 3 месяца назад
@@ITBR_Restoration LOL, Thanks I try :)
@jebsails2837
@jebsails2837 Год назад
It looks great! I think the original flat black components where to make the white dial stand out with minimal light source during night operation and to minimizing glass glare. Narragansett Bay
@itsyeeoledskoolfurry3208
@itsyeeoledskoolfurry3208 Год назад
These ship compasses were the FIRST GIMBALS WAY WAY before gimbals were even a THING!!!!
@bradleyleben7785
@bradleyleben7785 Год назад
Excellent job! I personally love old compasses. I have all kinds of them. They still fascinate me from the simplest to the advanced.
@Nckolas20
@Nckolas20 Год назад
Sandblasting is the most satisfying when I watch these
@logic0905
@logic0905 Год назад
Сударь, Вам бы счетчик гейгера, для таких игрушек...
@mjtunstall1976
@mjtunstall1976 Год назад
great idea of using gyroscopic method for this navigation compass!
@ITBR_Restoration
@ITBR_Restoration Год назад
👍👍👍
@flatworm00
@flatworm00 Год назад
That compass turned out super!
@johnchase3920
@johnchase3920 Год назад
Nicely done! I like the way you built the rest of the gimbal for the compass. For use on a vessel, you want the housing to be black inside. The diaphragm in the bottom is designed to move with expansion of the missing compass fluid. That’s why there is an “O” ring seal, as well as a washer under the knurled nut. You can make DIY fluid using a mixture of mineral spirits and liquid paraffin lamp oil. 50:50 ratio is probably fine. Thanks for sharing👍
@ITBR_Restoration
@ITBR_Restoration Год назад
Thank you for watching and for leaving a detailed comment. it was interesting to read.
@MUN.A1988
@MUN.A1988 Год назад
اليس السائل هو الزئبق ؟ كنت اظنه الزئبق ..لا اعرف يقينا..
@user-re2dk5rc3q
@user-re2dk5rc3q Год назад
Поздравляю, ты снова вернул рекомендации)
@ITBR_Restoration
@ITBR_Restoration Год назад
Спасибо!!! Для этого пришлось взять в жены дочь директора Ютуба😂😂😂
@restorerestoration4705
@restorerestoration4705 Год назад
Top marks... another awesome restoration.
@H70334
@H70334 Год назад
The case of a compass is never bright and shiny. It needs a contrast to the compass disk so that it can be read at night. Nice work vor the stand .
@liviostocco1745
@liviostocco1745 Год назад
Oggetto bellissimo! Complimenti per il lavoro di restauro!
@ITBR_Restoration
@ITBR_Restoration Год назад
Grazie per la visione e per il tuo supporto!
@achim2950
@achim2950 Год назад
There is room for improvement! A little tip by the way - perfect restoration can be found at "my mechanics".
@m3ff986
@m3ff986 Год назад
Désolé, je vais être critique, je ne critique pas le travail effectué mais pour moi cette vidéo c'est juste une remise en état avec un coup de peinture cache misère. Dommage cette boussole a le potentiel pour une très belle restauration.
@apnaagritech786
@apnaagritech786 Год назад
Wow, old fashioned compass .thanks for sharing technical vlog. Gift
@tedschmaltz4346
@tedschmaltz4346 Год назад
That stand really put it all together. Nice work.
@josiahbox8761
@josiahbox8761 Год назад
The 66/2996 probably means that is the 66th compass out of 2996 manufactured.
@lillywolf3018
@lillywolf3018 Год назад
I came up with the same idea
@subtext9881
@subtext9881 Год назад
It is more likely, but not certain, that it means 2996th unit of 1966. Usually, but of course not always, east German serial numbers were structured like that.
@19Bmiller
@19Bmiller Год назад
Very well done and quite creative with the new stand
@isaiahpero7837
@isaiahpero7837 Год назад
5:40. In no export, but I was disappointed you didn't try to remove the debts and scratches in the 3 pieces BEFORE painting them. The compass still looks good in the end, but I think it would've looked a bit better if you sanded the dents out. Just my opinion. Great video.
@Sergei_kv82
@Sergei_kv82 Год назад
Very nice DDR historic compass! Good quality!
@culturemyworld2362
@culturemyworld2362 Год назад
VEB Device and Controller Works Teltow
@ITBR_Restoration
@ITBR_Restoration Год назад
👍👍👍
@dixonqwerty
@dixonqwerty Год назад
Looks amazing with those new colors
@user-uq1tg4ik1g
@user-uq1tg4ik1g Год назад
Прекрасно!
@ITBR_Restoration
@ITBR_Restoration Год назад
👍👍👍
@HelloAdam_
@HelloAdam_ Год назад
Superb work! Love the new stand 👏
@ITBR_Restoration
@ITBR_Restoration Год назад
👍👍👍
@dsmith004
@dsmith004 Год назад
The bellows allows for atmospheric pressure change.
@A3Kr0n
@A3Kr0n Год назад
Aiding and abetting the enemy by repairing their compass? I see where this is going. Your shelf of finished projects!
@shedmanx3640
@shedmanx3640 Год назад
Looks like a ship’s compass to me too. Sailed enough boats to recognise a marine compass.
@servenserov
@servenserov Год назад
Шедеврально! Великолепный прибор и, что весьма немаловажно, грамотная отличная реставрация!
@ITBR_Restoration
@ITBR_Restoration Год назад
Спасибо за поддержку! Как раз сегодня, выйдет новое видео на канале, буду благодарен если посмотрите!
@annagettings4675
@annagettings4675 Год назад
The counterweight is actually a component of the Gimbal. It allowed the compass itself to stay steady despite the ships movement, so navigation would be accurate even on storm tossed seas. Erm... I'm a geek! 🙃
@georgebrown8312
@georgebrown8312 Год назад
Awesome job you did restoring that compass. It looks like a ship compass because of the balance on the pivot screws. Great work.
@gregpierquet5818
@gregpierquet5818 Год назад
My uncle filled his with vodka. If his boat went down, he could get drunk on the way down.
@re-fix9678
@re-fix9678 Год назад
wow good restore👍👍
@lolcec81
@lolcec81 Год назад
Комментарий в поддержку канала и ролика, а также труда мастера.
@ITBR_Restoration
@ITBR_Restoration Год назад
Благодарю 😉
@veidorje1681
@veidorje1681 Год назад
c'est un compas marine that's a nice one good job ps : boussole is the pocket size mostly used on land thanks for sharing : )
@jamesfield5346
@jamesfield5346 Год назад
Very cool
@chandrashekarsrinivas8473
@chandrashekarsrinivas8473 Год назад
I am from India 🇮🇳 and i subscribed.wish all the best for future projects.i hope you will reach 1M subscribers soon
@airnashville3883
@airnashville3883 Год назад
Your finished product looks nice. If you heard screaming from across the planet it was me when you took sand paper to the brass parts and a wire wheel to the lead part...
@danielramsey1959
@danielramsey1959 Год назад
Use Mousu black on the inside next time.
@alexanderjeske2138
@alexanderjeske2138 Год назад
1:23 heavy as lead, 5:23 soft as lead, probably toxic as lead, because it is lead.
@robertlevine2152
@robertlevine2152 Год назад
Magnetic compasses do not use lead, at least not those I am familiar with. My guess is that the ring is made of steel and is adjustable so the compass deviation can be adjusted. If you think of the big steel balls on a binacle compass. Another indication it isn't lead is that it could be sanded. My guess is lead would clog the sandpaper.
@evgen4916
@evgen4916 Год назад
Спасибо за труды !! Такую вещь восстановили 👍👍👍
@uniqko
@uniqko Год назад
Amazing skill
@carltonbirds
@carltonbirds Год назад
Captain Jack Sparrow would be proud 👍
@ITBR_Restoration
@ITBR_Restoration Год назад
😁😁😁
@1islam1
@1islam1 Год назад
🔴 What Is Islam? 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
@MirceaD28
@MirceaD28 Год назад
Someone took this compass from a shipwreck, and opened at one point
@SamhainBe
@SamhainBe Год назад
Outstanding! I have a lifeboat compass made during WWII by Lionel (Yes, the model RR company) that could stand refurbishment.
@a.p.369
@a.p.369 Год назад
Ich hätte anstelle weiß das Gehäuse in schwarz lackiert. Oder es einfach im originalen Bakelit-Look gelassen. Und anstelle deiner Wasser/Alkohollösung verwendet man Öl. Friert auch nicht und der Kompass beruhigt sich schneller, weil das Öl dickflüssiger ist.
@user-te8cg7bo4z
@user-te8cg7bo4z Год назад
Пора за сокровищами!))
@kapral7-
@kapral7- Год назад
Из России привет. Молодец, как всегда красивая работа.
@Gonza768
@Gonza768 Год назад
Amazing project. Nice to ser the channel grow! Very nice restorations.
@giggling_boatswain
@giggling_boatswain Год назад
4:03 Раз есть сильфон, значит компас был заполнен жидкостью. Сильфон - это дорго богато - обычно просто резиновая мембрана на тех, что подешевле. Компенсирует расширение/сжатие жидкости при разных температурах. Жидкость предотвращает вибрацию и дрожание указателя и делает его вращение плавным.
@drewroy22
@drewroy22 Год назад
Maybe I'm wrong, but aren't you supposed to sand with the grain?
@jairborges474
@jairborges474 Год назад
Wonderful job. Congratulations from Brazil.
@ITBR_Restoration
@ITBR_Restoration Год назад
😁😁😁
@restorationofdirty
@restorationofdirty Год назад
beautiful restoration project 🌠💞
@tommyherbert3931
@tommyherbert3931 Год назад
Awesome restoration!
@ITBR_Restoration
@ITBR_Restoration Год назад
🙏🙏🙏
@TEXNVIK
@TEXNVIK Год назад
На радиацию перед разборкой проверил?
@illyasjr867
@illyasjr867 Год назад
Ага, со старыми приборами нередко шли шкалы с СПД
@weekendstuff
@weekendstuff Год назад
Very cool device and nice restoration.
@glennvogt1194
@glennvogt1194 Год назад
The compass looks amazing. Nicely done ✅
@collinpribula3270
@collinpribula3270 Год назад
Aawweessoommee!👏🏻👏🏻👏🏻👏🏻👏🏻🥰🥰🥰💓💓💕💞💛💛💗💗😍😍💖💖❤️
@Freeman-Dl70
@Freeman-Dl70 Год назад
Very nicely done!
@oneshotme
@oneshotme Год назад
When you showed what liquid you were putting it, I had to goggle it. I was raised on the water and was my understanding it was just mineral spirits. And not surprised I was wrong LOL But have never heard of water with it but understand after reading why. But my dad and others I knew always said only mineral spirits. Great restoration and an excellent job building the base!!! Enjoyed your video and Thumbs Up
@Miricrafts
@Miricrafts Год назад
Very well. Nice details on the video 👍
@ITBR_Restoration
@ITBR_Restoration Год назад
Thanks for watching and supporting!!!
@selmamariasantos4775
@selmamariasantos4775 Год назад
Boa tarde, linda a idéia. Parabéns trabalho finalizando e bonito 👏
@nataliakhartskhaeva7446
@nataliakhartskhaeva7446 Год назад
Спасибо за видео и ваш труд. Многие здесь умники, не смогут дать вторую жизнь инструментам.
@RoyZenzo
@RoyZenzo Год назад
You didn find same screws?
@aliozcnar1585
@aliozcnar1585 Год назад
Very nice. Thanks for the video..
@winstonpoole9906
@winstonpoole9906 Год назад
I think it's called a GIMBAL mounting
@alexei.alexeevich
@alexei.alexeevich Год назад
Аккуратно сделано, но с цветами не соглашусь, темные здесь смотрелись бы авторитетнее и золото с алюминием рядом не блестит
@OldGrayCzechWolf
@OldGrayCzechWolf 9 месяцев назад
Should be liquid filled to dampen rotation and other motion.
@marcjansen1000
@marcjansen1000 Год назад
That turns out nice! For the base you could have used some better wood!
@cm5838
@cm5838 Год назад
Looks great but was curious after seeing you cleaning the counter and seeing the aerosolized dust if it was lead, also was any of the parts coated with iridium or any other radioactive material to make it glow?
@apnaagritech786
@apnaagritech786 Год назад
Thanks for sharing video.
@Thorsteen_Rolfsson
@Thorsteen_Rolfsson Год назад
The Number: 66/2996 = Year / sequential Number.
@albaldinette
@albaldinette Год назад
... Parabéns ...
@ilia12able
@ilia12able Год назад
Кто же такие вещи металлической щеткой хреначит??? Все только поцарапал
@normanmerrill1241
@normanmerrill1241 Год назад
Very nice work…well done…
@stlee911
@stlee911 Год назад
I feel like the ingredients are a waste. You'll need to remove more gloss and scratches. It's a waste of a good opportunity
@atlanticantiquesltd7372
@atlanticantiquesltd7372 Год назад
Outstanding…
@RestorationAustralia
@RestorationAustralia Год назад
Looks great, well done.👍
@user-yy6zt9jy7f
@user-yy6zt9jy7f Год назад
당신의 복원기술 = 예술품 창작 과정 👍👍👍👏👏👏 멀리 아시아에 있는 대한민국 🇰🇷 에서 당신을 응원 합니다. 신 께서 당신께 건강과 행운을 주시기를 기원하겠습니다 🙏🙏🙏 😊😊👍👍👏👏🖐🖐🖐 🇰🇷🇰🇷🇰🇷
@mihailcherkashin5968
@mihailcherkashin5968 Год назад
Хотел похаять за методы обработки, но результат понравился, так что лайк!
@publicclammer
@publicclammer Год назад
Beautiful! And the lathe is awesome!
@TimStevens32
@TimStevens32 Год назад
looks like what Jack sparrow would try to use
@Sergio_Hattifnatt
@Sergio_Hattifnatt Год назад
In unrestored condition ;)
@paolomichielin4849
@paolomichielin4849 Год назад
Molto bella! Bravoo!
@AY-tv4gw
@AY-tv4gw Год назад
Мда. Вэдэшкой побрызгать, щеткой потереть, покрасить. Вот это реставрация, конечно.
@flashgarage
@flashgarage Год назад
О, я не один)))) тоже пишу, что это не реставрация.
@peterhodges6684
@peterhodges6684 Год назад
Nice restoration, great job on the base ! Very cool !
@paulheitkemper1559
@paulheitkemper1559 Год назад
Brasso. Look into it.
@alekshovkun306
@alekshovkun306 Год назад
Компас морской ГДР жидкостный спиртовой. Приблизительно выпускался с 1951 годов
@ITBR_Restoration
@ITBR_Restoration Год назад
Спасибо за пояснения!
@antvo1162
@antvo1162 Год назад
А для чего была предусмотрена та латунная гармошка с ниппелем на дне?
@ITBR_Restoration
@ITBR_Restoration Год назад
@@antvo1162 Эта гармошка нужна для компенсации давления внутри компаса. Так как он полностью герметичен, жидкость внутри будет расширяться/сужаться, в зависимости от внешней температуры. Думаю если бы не было компенсации этого давления, это негативно повлияло бы на работоспособность компаса.
@h45e
@h45e Год назад
Would love to have that as a paper weight.
@user-ov4oy5vn1y
@user-ov4oy5vn1y Год назад
это судя по всему корабельный компас зафиксированный так, чтоб качка не мешала
@samoelalves8107
@samoelalves8107 Год назад
muito bom so acho que deveria ter usado oleo lineral em lugar da agua
Далее
I Restored And Repaired This Antique Ship Compass
18:42
Vintage 1960'S Japanese TV LIGHTER 🔥  Restoration
16:09
Why Did They Stop Making These? [Restoration]
21:20
Просмотров 1,6 млн
Antique 1880s Clockwork coffee roaster restoration
35:47
1930s Desk Lamp - Restoration
23:27
Просмотров 6 млн
Rusty Vegetable Slicer Restoration
20:10
Просмотров 27 млн
Iconic French Wonder Lamp - Restoration
19:58
Просмотров 6 млн