Тёмный

Restoring A Giant Fractal Vise 

Make Everything
Подписаться 303 тыс.
Просмотров 33 тыс.
50% 1

The rare adaptive jaw vise is one of my favorite tools! I previously restored a small 2" version, but this new one is massive!! Close to 100lbs, and over 6" wide jaws!
Pick up a pack of WD-40 Specialist Degreaser & Cleaner EZ-Pods on Amazon here: amzn.to/3EayWaZ
You can also grab a can of WD-40 Specialist Gel Lube on Amazon here: amzn.to/3OVbwuY
Check out my friend Taras on IG for vises, machinist tools, and other awesome shop stuff! He shipped this to me from Illinois and couldn't have made it easier!
/ tar_mec
Check out the tools I used on this restoration below. As an amazon affiliate I earn from qualifying purchases:
Magnetic Chuck
amzn.to/45r6e1s
Pferd Wire Wheels
amzn.to/3OTee4n
amzn.to/47QF0CX
amzn.to/3sCayMA
amzn.to/44u247R
M18 Variable Speed Angle Grinder
amzn.to/3YQOJVM
Foredom Flex Shaft Grinder
amzn.to/3qEzPpa
Calavera Leather Apron
calaveratoolworks.com
3 in 1 Oil
amzn.to/3svDVQZe
Check out the Lincoln Electric Power Mig 140MP, great for the home shop, Mig, TIG, and Stick in 1 machine!
→ bit.ly/MakeEverything140
→ Lincoln 215MPI Welder: lered.info/215MPi_Zeppieri
→ Mig Welding Pliers - amzn.to/3VQ8KtR
→ Welding Hood - amzn.to/3yVMox9
Thank you to Pferd abrasives for supporting my shop and my channel. For links to some of the grinding discs I use most see below:
As an Amazon Associate I earn from qualifying purchases.
→ Flap disc:
amzn.to/2Myxozi
→ Inside corner disc (AMAZING):
amzn.to/2WoYM2q
→ Wire Wheel:
amzn.to/31k15rx
Thanks for watching! Be careful, know the limits of your skills and your tools! Don't try this stuff at home!
Like and Subscribe for more videos and check out our Instagram
/ makeeverythingshop
To help support Make Everything and this channel become a Patron:
/ makeeverything
For Make Everything T-shirts, hats and other products check out our website:
makeeverythingshop.com/store/
For PDFs of some of our project check out our profile on Instructables:
www.instructables.com/member/...
Below are some links to tools I use in the shop on a daily basis.
Starbond CA Glue:
bit.ly/2H2eQmn
As an Amazon Associate I earn from qualifying purchases.
→ Bosch Miter Saw ( My Favorite miter saw)
amzn.to/2BeBulk
→ Sawstop Table Saw:
amzn.to/2DuAYVy
→ Wen Tabletop Metalcutting Bandsaw
amzn.to/2DrS7zf
→ Articulated Vise:
amzn.to/2FXKw9V
→ Bosch Portable Bandsaw ( 18V)
amzn.to/2mQdUq4
→ Porter Cable Restorer:
amzn.to/2BeWrfU
→ Lincoln 120V Welder ( good for a home shop)
amzn.to/2Dly6qV
→ The Camera I use:
amzn.to/3WB3R8k
→ The Tripod I use:
amzn.to/3h4iHnm

Опубликовано:

 

26 авг 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 47   
@johnnyb362
@johnnyb362 8 месяцев назад
I bought my house last year and thinking that this would be the last time it was empty I’d paint the walls and ceilings with an airless sprayer. It took me a week to sand all the walls and masked the windows and masked the trim and remove all the outlet covers and mask the openings. Then ceiling fans and AC registers and light fixtures and appliances and on and on. By the time I was done I think I spent more on blue tape I did paint. You’re right though, removing that tape was the most satisfying part of that job.
@davidinohio.4667
@davidinohio.4667 8 месяцев назад
That’s the coolest vice I’ve ever seen!
@Bigfoot14000
@Bigfoot14000 8 месяцев назад
Can't wait for you to get and restore a fractal vise, those are thoroughly cool.
@scroungasworkshop4663
@scroungasworkshop4663 8 месяцев назад
You did say to tell you what other vice can grab a socket wrench. I restored a Swedish made Sevo vice that will do that but it’s not as complex or intricate as yours. There is also the fractal vice restored by Hand Tool Rescue that will do it too and I think it maybe even more ingenious. I highly recommend checking it out. That said, I would love to have a vice like yours. Great restoration and I appreciate people that can work and talk at the same time. Cheers mate, Stuart 🇦🇺
@andymuzzo8568
@andymuzzo8568 8 месяцев назад
Awesome vice. Look like without that pin the rear plate could be knocked sideways
@MakeEverything
@MakeEverything 8 месяцев назад
I thought i might have to worry about that, but with the machined grooves in the jaw of the vise, and the top plate, plus the 6 screws clamping down it would need to really get smashed to move at all. I think for now itll be okay
@RetroRhith
@RetroRhith 8 месяцев назад
@@MakeEverything What about tapping the hole and turning it into a set screw spot? Might help secure the back, but only after assembly.
@MakeEverything
@MakeEverything 8 месяцев назад
@@RetroRhith great idea!
@denniswhite166
@denniswhite166 8 месяцев назад
You got 20,000 balls and they're stainless steel? Color me jealous!!!
@xXXnirvXXx
@xXXnirvXXx 8 месяцев назад
This is a very "this old tony" comment... it checks out
@michaelblair3357
@michaelblair3357 8 месяцев назад
It would be cool to see how you would make a set of soft jaws for this.
@MakeEverything
@MakeEverything 8 месяцев назад
Good idea! I think it would be pretty easy with a laser cutting service, it’s a 2D part with a little grinding
@wayneseymore6748
@wayneseymore6748 7 месяцев назад
Beautiful piece with great workmanship. Great job
@Tar_mec
@Tar_mec 8 месяцев назад
You cleaned it up quick! Can't think of better home for it.
@HWMDesigns
@HWMDesigns 8 месяцев назад
Great video and what a cool tool
@dwwoodbuilds
@dwwoodbuilds 8 месяцев назад
Very cool vise! Glad to see it restored and put back to use. Great job Chris!👏👏👏
@CrustyRestorations
@CrustyRestorations 8 месяцев назад
Excellent job, amazing workshop and all the tools👍
@samrodian919
@samrodian919 8 месяцев назад
Amazing design ! And very well made too!
@ToolsandTime
@ToolsandTime 8 месяцев назад
Amazing vise and clever design!
@glencarolo2597
@glencarolo2597 8 месяцев назад
Love you're chanel; question, how does a magnet work on stainless steel...
@wallbawden5511
@wallbawden5511 8 месяцев назад
Glad to see it restored and put back to use job about the mag base and what you use it for absolutely brilliant idea one i will use my self as for the knockers you use your mag base for grinding on you just use it with a different grinder and this one is out of spec so even better weight till you see the one i am using i took the one off my surface grinder and used that did not harm it at all Big Cheers to you my friend
@therestorationshop
@therestorationshop 8 месяцев назад
I've got one of those and like you say, it is great to have around.
@itarry4
@itarry4 8 месяцев назад
There's by far a better but similar vice that will hold any shape accept this one pretty much truly can no matter how strange the shape there's a video of one being restored on Handmade Restoration which is a really cool channel a happy and well worth the watch. 😊
@larrymashburn7789
@larrymashburn7789 8 месяцев назад
If you have a O’Reilly’s auto parts, ask them for the yellow masking tape. It’s great middle of the road and solvent resistant.
@AndyPanda9
@AndyPanda9 8 месяцев назад
By removing those locating pins 14:45 , it seems to me that the back plate can now slide out sideways and spill all the steel balls out. Or do the top plates clamp down tightly on the back plates and secure them in place?
@carlthor91
@carlthor91 8 месяцев назад
My thoughts, as well.
@mattglandorf9600
@mattglandorf9600 8 месяцев назад
Waiting for the plans for the DIY vise
@jeremyspecce
@jeremyspecce 8 месяцев назад
I didn’t grasp how small the other one was until this one was next to it!😱
@jasonmcqueen1411
@jasonmcqueen1411 8 месяцев назад
The reasoning behind that dowel pins is to help keep the back plate from flexing out do to the massive pressures exerted by the ball bearings while clamping odd shapes.. Might wanna put those back in?
@MakeEverything
@MakeEverything 8 месяцев назад
There is a full length groove milled into the top plate that eliminates any flexing that could occur. The dowel pin just keeps the plate from being able to shift left and right
@jasonmcqueen1411
@jasonmcqueen1411 8 месяцев назад
@@MakeEverything I thought there was only a slot on the bottom so I went back- I see that now. 👍
@michaelplays2449
@michaelplays2449 8 месяцев назад
Great video !!!! thanks
@midnighttutor
@midnighttutor 8 месяцев назад
Great presentation! Just curious if you have tried those strip disks as an alternative to wire wheeling. In my experience they remove paint and rust great and there is none of that threat of getting cut. Thank you.
@tommays56
@tommays56 8 месяцев назад
We use to have one similar BUT had a hydraulic system built in to perform the function of the balls ⚽️ S
@sarchlalaith8836
@sarchlalaith8836 8 месяцев назад
Fractal vice
@yuzemir
@yuzemir 2 месяца назад
take the shape of a workpiece best bench fractal vice
@dingui875
@dingui875 8 месяцев назад
Top!!
@mykecollins3255
@mykecollins3255 7 месяцев назад
Just seen you on maker's channel. Call me Mabie. Just subbed and have alot to catch up on. Thank you for all the hard work you do and have done. Take care.
@timeflysintheshop
@timeflysintheshop 6 месяцев назад
So if you grip something small like just the socket, did it really grab it well enough? It seems like you might have too few balls in the reservoir for a small item.
@MakeEverything
@MakeEverything 6 месяцев назад
I was reluctant to put a heavy pressure on it as I think it will break the plexiglass cover, that being said I think I could add some more balls and it would help get even more pressure.
@LaraCroftCP
@LaraCroftCP 7 месяцев назад
@3:27 if that are stainless Balls, why the hack are they magnetic???
@GoldmansGarage
@GoldmansGarage 8 месяцев назад
I want!
@SchysCraftCo.
@SchysCraftCo. 8 месяцев назад
😮
@middleway1885
@middleway1885 8 месяцев назад
Noice
@Dierwolf2000
@Dierwolf2000 2 месяца назад
an adaptive jaw vise and a fractal vise are NOT the same thing. a fractal vise is nested half moon gripping surfaces. hence a fractal design. adaptive jaw vises work via a bed of ball bearings that the jaw teeth rest against.
Далее
Half of a Great Idea
26:34
Просмотров 261 тыс.
Can This Vise Hold Anything?
15:40
Просмотров 48 тыс.
I Did Not Expect This: 3 Years in Rust Remover
12:24
This Metalworking Tool Will Save You Time!
10:05
Просмотров 16 тыс.
Adam Savage in Awe of This Fractal Vise!
23:55
Просмотров 1,6 млн
Awesome spherical turning tool
11:01
Просмотров 421 тыс.
My Most Profitable Tool Got Replaced - Tubing Roller
13:23
Vise Restoration | 1910 Chas Parker 205-P
25:52
Просмотров 773 тыс.
Does this 60$ Tool Work?
12:09
Просмотров 41 тыс.
“Gasless” MIG Welding Explained!
12:45
Просмотров 12 тыс.
Rare Antique Fractal Vise [Restoration]
36:20
Просмотров 22 млн
Wilton Vise Perfect Restortation
22:42
Просмотров 95 тыс.