Today I restored an AK47 PAP style gun! Make sure to check out my Patreon where you can see exclusive restoration videos or even vote to see what gun I restore on here next! / membership
Do you want to vote for what gun I restore next? Check out my Patreon and you will be able to do just that! I will also be uploading an exclusive video on there very soon!
As a gun guy, I noticed you ditched the paper clip retaining pin and upgraded it with a real one. Cherry on top for me. One thing missing, rear sight aperture.
@@Sacrifice117 definitely sarcasm. I don’t like any of these weapon demolition channels. Annoys me that the algorithm lumps them in with informative firearm content.
@@ndub5781 Yet here you are, interacting with it and even commenting. If you don't want to see more of this stuff, steer clear of interacting with these videos.
Yeah best part, you shot it in the end. Glad I watched the whole thing, I was like...black paint on the wood? But then, the golden paint emerges and it all made sense. Very nice!
Next time, for removing rounds from a mag, remove the baseplate and then they will just drop out the bottom once you pull the spring/follower out. Then you won’t be pushing near the primer. Just an additional layer of safety.
@@MrOtistetraxyeah, gotta be careful with a couple decades old wet gunpowder, never know when slowly sliding them out, with no where near the force of an active pin, when one may pop off
@@MrOtistetrax he WAS being careful. This guy isnt some retarded dumbass. He's a professional who's skill is likely highly sought after in the restoration world. He probably has more knowledge about old guns/ammo than anyone commenting ever will
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
@@dove3853 Well Dove. I am already a believer and of course not worthy of the Father's unconditional love...but I know my place on Earth and my place with God. So thank you. :)
@@razorkid456 there is a small primer at the back of the casing that explodes with heavy impact. pressing screwdriver into primer while bullet is aimed at your hand = very unfun time
Century arms first imported these in 2014 and honestly this 1 was probably in working order. Had he put fresh rounds in that mag I bet it would have cycled. Might have been sticky on the first few rounds but after that I think it would have been fine
that screwdriver has nowhere near enough force to detonate one of those rounds. he is not ramming the screwdriver into the back of the round. he is using it to pry the rounds loose.
Yep, wondered how many days it soaked in salt water out of the box to simulate wear. The wood, the springs, and the firing pin were still excellent. Still informative, but not truly representative of ignored flood damage or a lake find.
Yeah I wouldn't be surprised if this entire channel was just a deep state honeypot trying to lure gun enthusiasts so they can make a target list for future raids when they come to take our guns away.
Very satisfying video. I will say that I highly recommend PB blaster penetrating oil for breaking loose rusted steel. It'll take rust off a chrome hitch. Best stuff out there. Far suppress wd40.
With that type of magazine you don't have to push the cartridge down at the front and slide to the rear. You can just push straight down on top and they will go in easily. Great video!
You can do that with all AK mags. Though, that generation of PMag does not have reinforced feed lips. Therefore, the way he is doing it reduces the stress on those plastic parts. His way is just different, not wrong, and actually probably better for that particular magazine.
I restored one a few years back, you made it look quite easy to take the barrel out haha, anyways for those that don’t know, you would need a press to take out the barrel. Anyways amazing work!
You did an amazing job. I was seriously impressed with the way you restored this firearm. Great job! If I were to see this come into a shop my initial assessment would have been that it would have absolutely worked with a little WD40, but chalk it up to a loss. You made a believer out of me.
Dude did you not know that wd40 will make it pop out like that? I tried it on 7 of mine... psl, rpk, ak47/74 saiga223.. gave them a good spray down and now I can quick change barrels... sheeet dog I got my rpk heavy barrel in my pap92. Just spray some wd40 on the trunion and they'll pop right out.
This video came on feed randomly & I want to say this was so therapeutic to watch. I’m a young gun owner still learning but to see this was great. My first time watching your video. Had to sub !
Great video! Personally I wouldn’t have bothered with the plastic magazine, or the ammo for that matter, but kudos on doing such a thorough job to showcase your skills. Keep it up!
@@sungukyun2608 Mil Spec Yugo AKs don't have that notch in the safety. The notched safety is either put on for export, or put on by the importer (Century Arms, for example). They are there due to the high number of US ranges that make you have the action locked back during cease fires. The welded muzzle thread protector, Tapco trigger, and Magpul mag indicate that is a US import.
I have a lot of questions. Firstly why blur the bcg? There's nothing there to hide. I want Brandon Herrera to go over this. I saw a lot of questionable stuff on I believe a deagle, or mac10? This whole "restoring" guns thing is fish af to me. I let this run long enough to post this, I hope you like this comment just as you did the last one and then pull your like. Edit: lmfao that barrel was that easy to get out? Just a little bit of wd40 and a good tug? Lol
So for reference for the next time you can take the bottom plate off the P Mag to dump the rounds out. There should be a tab to push down or it should be able to be pried forward past the locking part of the bottom of the mag.
Cleaning steel case ammo like that is not recommended btw you would be better off disposing of those. Any ammo really if its been exposed to the elements like that it becomes a hazard.
@@Punx63 it's not the cleaning that's the problem, it's trying to shoot the ammunition after you clean it LOL. Btw considering you're the ammo and mag expert you must have forgotten to mention how this guy doesn't know how to load a p mag properly. In fact, out of all of these armchair expert comments I haven't seen one person point that out.. Hmmm🤔
@@dudedog884 there's nothing technically wrong with how he loads the magazine. Certainly it generates less stress on the non-reinforced, plastic feed lips of the magazine doing it the way he does it.
Perfect restoration! Respect for the knowledge of disassembly and assembly AK elements. Nice and clever. I still remember when I had in military service training with closing eyes. This technic is important when you must disassembly and assembly AK in dark place😉
How long did it take you to disassemble and assemble a rifle like this? My disassembly and assembly time was 22 seconds 32 years ago. Today it would take much longer. Today I am 50 years old, I was 18 then 😉👍
Of course I remember. With AKMS vz 80 I got the best rating time for disassemble 14s and assemble 23s. Required time to pass the exam in my Unit for disassemble was 18s and for assemble 30s. Who was get close to disassemble 14 and assemble 23 got prize and point to get extra day home pass. It's not over yet. My best rating Kalash shooting was 48 points by 5 shots. 4 of 5 bullets was hit in 10 after many days practice of shooting 100m from standing, crouch, prone 3x5 firing to get 150 points. I still remember my lucky day with the best prize which was got 12 days home pass😁I missed the 3rd place in the team by 9 points. AK is like riding a bicycle😉
