Revell Tornado GR.1 1/72 | The Inner Nerd

Подписаться 87 тыс.

Просмотров 97 тыс.

50% 1

Easy Guide - How to Paint & Mask Aircraft Canopies using Tamiya Products • Aircraft Canopies & Ho...
Items Used Airbrush: Harder & Steenbeck Evolution Silverline Needle/Nozzle: 0.15mm Compressor: Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar) Paint: Tamiya Acrylics thinned with Tamiya X-20A Thinner Brushes: Pure Sable Brush - Various Sizes Glue: Tamiya Extra Thin Cement/Loctite 406 Superglue Sanding: 3M 600p / 800p / 1200p / 2000p / 3000p sheets & sponges
0:05 - 2:19: DESTROYER OF SKIES - C21FX
2:24 - 5:04: Genesis-6916 - SPM Music Group LLC
5:16 - 7:00: Dark Frontier - Kári Sigurðsson
11:57 - 13:12: The Horde Is Near-9998 - Thunderstep Music

Хобби

Опубликовано:

23 дек 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 139

@garryharriman7349 6 лет назад

Hi. I was a RAF NCO in charge of small teams of personnel whose job it was to paint the real things. The days of 'wet on wet' camouflage of the European theater was the main paint scheme for the GR1 until the aircraft became the GR4 with a new paint scheme to go with it. This aircaft looks like it is a 9 Sqn GR4 from Bruggen, an aircraft I would have worked on when I was there from 1990, to 1994. Great job, well done!

@onlyinmanchester3309 4 года назад

It's gr1

@More-Space-In-Ear 5 лет назад

I must admit I do miss model making. I was the luckiest kid in school due to having my mother working in a toy shop back in the 70’s, was always getting asked to make models to hang in the shop window 😊 these however are as said before, the next level....

@jozuavanlangenhove6586 2 года назад

Great build, but 1 mistake The Martin baker mk10 ejection seats doesn't have ejection handles on the headrest box, only a single handle on the seat pan between the pilots knees. For the rest a great model.

@MikeJones-hc1gw 6 лет назад

You are so fuggin' good. I swear t' God. I have been modeling for 45 years and I have never seen better work. Just stunning. Respectfully, Mike Hart-Jones, Chantilly, Virginia, USA

@thatpolishhotdog 6 лет назад

Amazing result!

@gailraby1722 6 лет назад

beautiful model of a beautiful aircraft.

@robertvoss6145 6 лет назад

Another excellent build, great work

@Zeus-kj7nn 5 лет назад

Darn, I thought I was good. This is another level. Well done..

@anthonytauriello4975 6 лет назад

Excellent work .

@paulanderson3772 6 лет назад

Awesome video. Thank you for sharing your superior knowledge and skill.

@modeltankguy 6 лет назад

sweet build keep them coming

@Myfactory62 6 лет назад

Another good video and build,always a pleasure.

@stevebrannan4966 6 лет назад

Great job again mate.

@BennyCFD 6 лет назад

Ya.......I think that is very Nerdish. Good job. Thanks.

@JV-kg1dm 5 лет назад

Beautifull done thanks for the movie

@anthony5537ify 6 лет назад

*This Is a good model and great colors ! Nice job !*

@n13320 6 лет назад

Great work mate! Very inspiring indeed : ) Thank you for going to all the effort to make these videos, they are always excellent quality and very informative.

@konradalexander7561 6 лет назад

Merry Christmas!

@zippy5131 2 года назад

Erm.... the GR1 had Mk10 seats, which does not include the overhead initiator handle. The last seat to use the overhead handle was the MK 7. I was on XV Sqn back in the '90's... and 19, 208 Hawk T1 Sqn's which also had the Mk 10. Apologies for apple cart and upsetting.

@TheInnerNerd 2 года назад

Yep it's been said before. I got carried away with the scratch building and didn't check against my references. Thanks for watching :)

@Eoin6661 2 года назад

Lol I was actually on IX Sqn in the 90s and would have worked on this, detailing the overhead handles on the seat, and sweeping the wings back on a parked GR1 was never done, but hey nice build

@andrewhenly9057 Год назад

Facescreen firing handles.

@guerreiroveloso4513 6 лет назад

What a nice! Vary good job!

@danielbrandao3166 6 лет назад

Outstanding!!! Love your job, when I grow up I'll build just like you. 😁 Greetings from brasil 🇧🇷

@thetourettesgamer8851 5 лет назад

Still can’t believe this beautiful aircraft will be gone from the skies soon........

@tonybmw5785 5 лет назад

All gone from the UK skys now :(

@davidparsons3432 6 лет назад

Very Nice!

@dannymontoya1235 6 лет назад

Very nice! Merry Christmas from New Mexico

@voodoonights1671 6 лет назад

Nice build. Well done. Merry Christmas :-)

@terri-annmatthews7693 6 лет назад

Awesome work mate . Merry Christmas

@thenortherngrump333 Год назад

Airbrush control is excellent. So jealous. Getting better now I've sacked off the awful revell aqua acrylic paints.

@TheInnerNerd Год назад

Thank you and thanks for watching :)

@davidstewart6292 5 лет назад

Really nice build, only one comment there are no face screen ejection handles on the Mk10 seat.

@f-4bphantom591 6 лет назад

Amazing Inner, another beautiful build to another beautiful aircraft any more realistic looking others would think it's the real plane keep the videos coming and your choice of background music is awesome. Merry Christmas Inner

@BudgetModeller 6 лет назад

Really, Really Awesome model...Amazing work...But why change the seats from a MK10 to a MK7? I've got 7 years experience working on Tornado Weapons systems, inc AAES, and the MK7 Martin Baker Seat was never fitted to the Tornado. That seat was for F-14's, F-5's, Tombs, F-105's as well as others. The Tornado had a MK10 fitted, with no Head Box 'Bang Handle'.

@gianluigimarino8264 4 года назад

Just other best work ... :-)

@allgood6760 Год назад

Nice build👍✈️🇳🇿

@TheInnerNerd Год назад

Thank you and thanks for watching! :)

@wjtr._03 4 года назад

I’ve got this kit, hardly any flash and good detail but the cockpit section and front section of the fuselage were warped and I lost the back canopy :/

@56Gumball 5 лет назад

Very well executed Tonka, but what’s going on with the nose leg angle??

@ScaleHangar182 6 лет назад

Hello! What clear do you use?

@TheInnerNerd 6 лет назад

Scale Hangar 182 Hello. I use Halford aerosol Lacquer. I decant the aerosol so that I can send it through my airbrush

@twobyfour 6 лет назад

Another brilliant paint job. This GR1 looks menacing against the stark white backdrop. Very nice photography. Its good to experiment, but, I did find the split screen a little distracting. Still, an excellent build.

@ladislavtatkotomastik7958 6 лет назад

super !! :))

@kevinives9116 4 года назад

Hi, fantastic build. Absolutely amazing. On the first scene you fit overhead ejection handles to the seat. RAF aircraft fit Martin Baker Seats. They would be MK 10 seats on the Tornado. Anyway RAF aircraft are not fitted with overhead ejection handles. They have one loop handle that sits between the aircrews legs. Hope this helps.

@TheInnerNerd 4 года назад

Hello and thank you. And yes it's been pointed out several times before. I didn't do my research here and went ahead with some unnecessary scratch building.

@bugler75 3 года назад

Thanks, you have just saved me some work 👍🏼😊

@DetailingCars 6 лет назад

What camera do you use to film?

@chrishighley5968 6 лет назад

a real beauty. Can I ask how you thin your W&N oil wash? I have only ever used Flory clay based washes.

@TheInnerNerd 6 лет назад

Chris Highley Thank you. I thin using white spirit at a ratio of around 90% thinner. Turpentine will also work for thinning too

@cesarignjas 6 лет назад

Hi! great build! I have 2 of them in my shelf, maybe it is time for me to start them, any advice about some tricky areas?

@TheInnerNerd 6 лет назад

cesar muniz Thank you. Overall a good kit. The canopy fit is questionable - hence the open cockpit. Landing gear is weak too so you have to be very careful if aasembling it as I did in the video

@dannymontoya1235 6 лет назад

Very mica

@mrjockt 4 года назад

The “Tonka” just doesn’t look right with the wings swept on the ground, especially with tanks and pods fitted to the pylons, the real thing normally has a trestle under the rear fuselage when sweeping the wings fully back on the ground to prevent “tail sitting”.

@czarpeppers6250 6 лет назад

Humbrol paint: they make great model stands! ... and that's about it.

@arandomyoutuber6634 5 лет назад

I think the paint is okay.

@PeteCourtier 2 года назад

@@arandomyoutuber6634 Good in its day but personally it’s not up to modern paints. Try lacquer paint like hataka orange line. It’s fantastic stuff👍

@markneal1175 6 лет назад

The MB Mk10 fitted to the tornado doesn't have any pull handles on the headbox, just a handle between the legs.

@TheInnerNerd 6 лет назад

Mark Neal Sorry for the inaccuracy. I was using a reference image from a Tornado which showed them to be above? Maybe the seat was a later version in the image used...

@andrewackroyd5874 6 лет назад

Hi there. I think missed what base coat you applied to the aircraft right before about 4.03 in the video?

@TheInnerNerd 6 лет назад

Hello. I used Mr Hobby Mr Surfacer 1500 Black thinned with cellulose lacquer thinner suitable for airbrushing

@tawyhacy100y 6 лет назад

It is great! But I hope that you will make videos in FullHD.

@TheInnerNerd 6 лет назад

TawyHaCy 100Y Thank you. I do shoot in 1080p HD but limit the upload to 720p because it already takes around 2 hours to upload! Sorry for the slight drop in quality because of this

@sixhawks 6 лет назад

Thanks for this, was gifted the Italeri GR.1 1/72 kit for Christmas - hopefully the build up about the same? =)

@TheInnerNerd 6 лет назад

SixHawks No problem I hope you enjoyed. I guess so but having never seen the Italeri kit I couldn't say for sure

@philbrad2006 6 лет назад

Nice surface detail on the Revell kit. However, (again) Martin Baker Mk10 seats dont have overhead pulls and isn't the front undercarriage oleo on backwards? Not a bad effort, interesting work on building up the camo grey. Does the Revell kit need nose weight to sit correctly?

@voodoonights1671 6 лет назад

Front wheel is correct, but at a funny angle i think.

@TheInnerNerd 6 лет назад

Phil Bradley Sorry for the inaccuracy. I was using a reference image from a Tornado which showed them to be above? Maybe the seat was a later version in the image used... Also the front wheel is on correctly as it fit into the housing on the mould. No weights used its balance OOB

@jimmhop 6 лет назад

Hi there! What airbrush do u use? Espescially for preshading and hight lightning.

@TheInnerNerd 6 лет назад

Home Broadcast Gaming Hello. I use a Harder & Steinbeck Evolution Silverline with 0.2mm nozzle @ 22psi

@jimmhop 6 лет назад

The Inner Nerd, thaanx! Coz i have problem with thin lining. Got myself Paasche Talon, using .35, and it's very difficult to control... Using Ammo and Ak paints with home brewed thinner.

@Triplegix 7 месяцев назад

Very nice build ! i am building 1 right now. I wonder if you also struggled with the rear landing gears? I also think that the front landing gear is pointing too much to the back in this kit?

@TheInnerNerd 6 месяцев назад

Thank you, and I hope you're getting on with yours okay. I think I remember they were tricky, not very strong and not very good fixing points for the parts.

@cw-aviation 3 года назад

What were you doing at 3:51 please? With the green handle thing.

@TheInnerNerd 3 года назад

The green handle thing is Tamiya Extra Thin Cement - it's the glue I use to stick the model together :)

@mrjockt 5 лет назад

Just for once I would like to see a model of a Tornado without the stupid double torque link on the nose leg, they built almost a thousand Tornado aircraft but, if I remember correctly, they only built about fifty nose legs of this style, before switching to the single forward torque link only.

@TheInnerNerd 5 лет назад

The part is out of the kit. I'm sure there is a kit out there that ha a single forward torque link. In the meantime I'll be building what's on the box

@yalcnbufe8417 2 года назад

Hi, what is being used on 07:07 ? Is it something like wax to protect the paint? Thanks!

@TheInnerNerd 2 года назад

Hello. I'm using acrylic lacquer based clear gloss (Mr Color Superclear III) This protects the paint and prepares the surface for decals. If you want more detail how this works what this video. It's aimed at beginners and explains better :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W3zDmJwpPcY.html

@yalcnbufe8417 2 года назад

@@TheInnerNerd This video helped me a lot as a beginner. Thanks for the answer and the video!

@divoiuclaudiu310 6 лет назад

Regarding the burnt Siena oil paint, was it used like a wash or straight out of the tube?

@benweber888 6 лет назад

Divoiu Claudiu I’m not sure but to me it looked pretty thick

@divoiuclaudiu310 6 лет назад

Ben Weber Yes. That’s why I was asking, looked too thick to be a wash. It must be thinned out a bit.

@TheInnerNerd 6 лет назад

Divoiu Claudiu At what point in the video are you referring to? Just so I can give you the correct information

@divoiuclaudiu310 6 лет назад

The Inner Nerd At around 2:10 , the finishing part of the seat

@wjtr._03 4 года назад

Did anyone else who built this have the warped frontal section

@vicparratt7523 6 лет назад

Yeah great build not keen on the split screen teqnique.

@TheInnerNerd 6 лет назад

Vic Parratt Thank you. Im sorry about the split screen, its an attempt to reduce the overall run time and show more areas of the model at once. Ill try and keep it to a minimum 👍

@TRPilot06YT Год назад

How was the model itself, were the molds good and is it wort the price or does it show its time?

@TRPilot06YT Год назад

Im looking for a 1:72 scale Tornado and iam stuck between the "new" ASSTA1 Tornado and this and not sure which one to get. Any advice would belovely:)

@TheInnerNerd Год назад

The kit isn't great but we don't have much choice for the Tornado. It's buildable but is way more work than it should be for a 1/72 model. Hope that helps and thanks for watching :)

@TRPilot06YT Год назад

@@TheInnerNerd Ah this will definetly help, thanks alot

@alexrobertson1472 Год назад

Was thinking of buying this kit but it has some awful reviews in places, what did you think of it? Looks great by the way!

@TheInnerNerd Год назад

The kit isn't great but we don't have much choice for the Tornado. It's buildable but is way more work than it should be for a 1/72 model. Hope that helps and thanks for watching :)

@alexrobertson1472 Год назад

@@TheInnerNerd Yeah I got the kit based on your build and can totally agree with that review...its not horrible but it is far more complicated than it should be. Nice kit though.

@LemonMann 4 года назад

What kind of glue you used on the clear parts?? the Mr.cement S fucked my clear parts ..

@TheInnerNerd 4 года назад

I use Microscale Krisal Klear. I am told this is the same as white PVA though. But dries clear and doesn't fog canopies since it dries cold

@BellMichael-sh4xi 6 лет назад

TIN, a couple of questions: 1) you didn't preshade, so did you intentionally let any black primer show through panel lines when painting basecoats? 2) why did you decide to do the overall wash with grey instead of black? Thanks.

@TheInnerNerd 6 лет назад

Hi Michael. I use the black-basing technique to get more variation in the top-colour coat by marbling the colour over it. This method can be done in a panel-by-panel manor to get more shading around the panel lines. If you want panel lines to show through the base coats then yes . 2) The grey wash is less stark than the black and I didn't want the finish to be too intense so used black

@ironkcoony 5 лет назад

Black wash tends to make models looks cartoonish IMO, the weathering on this tornado is spot on, even the canopy looks used and slightly faded.

@matthewbesler9506 4 года назад

Dessert = ice cream. Desert = landscape type.

@TheInnerNerd 4 года назад

Haha thanks. I can't believe I missed this 😂. Everyone loves dessert yellow 😋

@reddevil6164 3 года назад

Hi where did you download the 1:1 instruction

@TheInnerNerd 3 года назад

Hello. You can get these from Google images but also try here. This is a database for blueprints of aircraft www.airwar.ru/other/draw/

@reddevil6164 3 года назад

Thank you for your answer

@arandomyoutuber6634 5 лет назад

I wish I had an airbrush to paint stuff like that....

@More-Space-In-Ear 5 лет назад

You can pick them cheap enough on amazon, I got everything for less than £60

@arandomyoutuber6634 5 лет назад

@@More-Space-In-Ear oh

@More-Space-In-Ear 5 лет назад

ARandomRU-vidr sorry I should of added what I got... Compressor with 3 litre tank, 2 duel action gravity fed airbrushes with hoses, air filters, cleaning pot, cleaning brushes, 3 needles of 0.8, 0.5 and 0.3mm, 3 gravity feed paint pots.....

@arandomyoutuber6634 5 лет назад

@@More-Space-In-Ear oh

@arandomyoutuber6634 5 лет назад

@@More-Space-In-Ear that's a lot

@jantimmer5558 Год назад

How was this kit (if you can remember)

@TheInnerNerd Год назад

The kit isn't great but we don't have much choice for the Tornado. It's buildable but is way more work than it should be for a 1/72 model. Hope that helps and thanks for watching :)

@onlyinmanchester3309 5 лет назад

Can u list paints and where I can get them I have a sparmax sp35c

@TheInnerNerd 5 лет назад

The paints are all mentioned in the video at each point. I use Tamiya Acrylics so if you put in a google search for this the you'll be able to see your best options for shops/delivery in your area. Personally I use my local model shop as they have the full range of Tamiya acrylics. If you're airbrushing make sure you pick up X-20A thinners too. To make the pot airbrush ready you can add 2ml of this thinner to a brand new pot so it can be accepted straight from the pot in the future. Hope this help and good luck!

@onlyinmanchester3309 5 лет назад

@@TheInnerNerd can u link me camo what pen did u use too draw camo lines

@TheInnerNerd 5 лет назад

Hi Steve, I can send a 1:1 copy of the camouflage pattern viw email. I use a pencil to mark out the lines needed for the splits

@chillis_concoction Год назад

does it require glue

@jantimmer5558 Год назад

Yes but there are some boxings of this kit in the starter set which includes glue and paint

@chillis_concoction Год назад

@@jantimmer5558 oh ty

@philipplutki 6 лет назад

ive bought myself one, but i dont like it, the pieces dont really fit and the pylons on the wings fell off, so i had to glue the wings and the stickers for the cockpit are too big. i wouldnt recommend this kit ☹️

@PeteCourtier 2 года назад

That’s a shame. Mine have been fine.

@Htchhgjhhchc45 2 года назад

I need an Airbrush I only paint my Models with a normal brush looks like shit every time 😂

@TheInnerNerd 2 года назад

A starter set I recommend is a Gravity Feed Airbrush Starter Set - Sealey AB9321 Starter Compressor - HSeng Airbrush Compressor. They will definitely improve the finish of your paintwork over a brush and allow for a variety of new effects. I have a videos aimed at beginner type questions here if that helps ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W3zDmJwpPcY.html Thanks for watching :)

@Htchhgjhhchc45 2 года назад

Thanks

@robertjensen1438 3 года назад

Just a comment for the algorithm

@dav8show680 3 года назад

You don't go ahead with the weathering. Why it could be better

@paulk556 4 года назад

A well detailed model but marred by inaccurate addition of a face blind handle on the ejection seats in the beginning of the video. Almost stopped watching the rest of the build there and then but enjoyed the rest. Note, it was not practice to leave the aircraft with swept wings when parked; more than one sat on its bum during its life in service due to overlooking the fuel state or load fitted.

@user-dq1fm5fi6d 6 лет назад

Не дуже супер, шось таке зробили не те як треба було!

@TheInnerNerd 6 лет назад

Эрвин Роммель Я должен быть честным, это не моя лучшая попытка, и мне не понравился этот набор, как некоторые из моих других. Вся его часть обучения и некоторая поддержка были бы хорошими 😒