Review of Foxwell NT630 Plus - Nissan Steering Angle Sensor Calibration 

I agree..

Look for special functions and click

Hi. Did you ever get this fixed? How do?

@@123tech Turned out my Foxwell didn't complete the calibration. My nephew had a better scanner which calibrated and cleared everything.

@@rondail5675Ok, good to know!

Ever actually fix the problem like he said he did and then resetting the code lol?

@@supdougs4487 nope not yet. Have been busy with working on a friend's car. For now I just turn off the vdc lol

@@visionvipcustomz4455 instead of what he did by not following basic diagnostic follow up for re-learning the "Steering Angle System" with the module and communications off! Try doing it with the key on, engine off. Due to government laws, but many vehicles have electrical load shedding software added to them. Basically, you don't have many electrical loads on the battery plus the alternator when cranking. That is a undesirable load on the battery & engine both. So, repeat the procedure with key on, engine off, modules are awake, this allows this or any scan tool to talk to this SAS module. Surprise! It may ask you to place the steering in the straight ahead position and hit enter. Others, asked the engine is running, and you turn to left lock, hood for 2 seconds, then turn right to lock, hold for 2 seconds, return to straight ahead, wait as it relearns new sensor values, or old values again. Yours may vary by software! As he said; "I have an idea of the basics of what's going on, but not really!" Sounds like customer service, a store manager or government employee. Not an auto tech using best practices. When asked by the scan tool to press start....That was a push button on the dash (Or Key, yours may vary) but not on the actual scan tool. Hopes this helps! DK, ASE Master Tech since 78.

@@deankay4434 2yrs later it definitely helped me ⭐

Same here! Have to use an old laptop but I need to find the charger lol

It did work right out of box. I've only ever plugged it into a car and a USB outlet for power. I haven't had a reason to try brake bleed procedure with it. If I plug it into just a USB for power and look through menus under ABS, I can select "Demo" and look at functions. I see an "HCU air bleeidng mode" under ABS/ESP. Are you thinking of doing it on an R51 Nissan Pathfinder? It seems to have functions pretty specifically as to Manufacturer and even Model, but if you are looking at a Nissan I'd plug it into mine and poke around to see if there is a bleed function.

@@brmadsenad Jeep JK 2007 CRD (Australia) I am guessing they are the same as regards to brakes? Thanks,

Did you find a solution, my Infiniti is doing the same

I have de same issue? How do yo fix?

Calibrate it my friend

It's disgusting

I thought he had a donkey in the car !

@@frankn4424 lol

Someone had to say it! Thank you