No video :(

REVIEWING & WELDING RANDOM METALS WITH EASY WELDING RODS! QUESTIONS ANSWERED! ALUMINUM REPAIR RODS

Подписаться 216 тыс.

Просмотров 29 тыс.

50% 1

#REVIEW #EASYWELDINGRODS #WELDING
In this video i am answering a bunch of questions i had from my first video "reviewing the easy welding" (LINK POSTED BELOW) i had dozens of questions about people asking what all these could weld so i decided to get a bunch of different metals out and try and find out for you guys. copper, brass, pot metal, dirty aluminum, pull tests, aluminum wheels, mild steel and stainless steel. If you hve any other suggestions leave a comment and i will make another video if i need too
THANK YOU VERY MUCH FOR WATCHING!
please like, share and subscribe. it really helps a ton!!
also check me out on facebook at...
/ caseyscustoms
and instagram at
www.instgram.co...
here is the original video here...
here is the original video here...
• REVIEWING "EASY WELD R...
get the blue demon rods here...
www.amazon.com...{creative}&hvpos={adposition}&hvnetw=o&hvrand={random}&hvpone=&hvptwo=&hvqmt=e&hvdev=c&hvdvcmdl={devicemodel}&hvlocint=&hvlocphy=&hvtargid=pla-4583589102188848&psc=1

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@cessealbeach 3 года назад

Have you heard of the term "Surface Preparation"

@fatherofdragons4880 3 года назад

He prepped them beforehand apparently.

@CaseysCustoms 3 года назад

Everything was fully prepped before we tried any welding. If you do some research you will see it’s pretty well documented all the things that the sticks wouldn’t weld, are not weldable with these. So no amount of prep matters, they weren’t possible

@futurfoto680 4 года назад

Great info! - Just wondering if the mild steel or brass would take to the braze more if first brushed clean with steel brush & cleaned with acetone? - Thanks, Casey!

@sparkyjackson8479 3 года назад

If you guna clean it to weld it, clean it to braze. The steel still had scale on it and the copper looked dirty

@kdigiacomo 4 года назад

Pull the valve core on that wheel if you're putting heat on it or take the tire off. ✌️

@19jody72 3 года назад

Would it have been different results had you sanded or grind on the metal?

@CaseysCustoms 3 года назад

All the metals were prepped by cleaning and grinding them down.

@19jody72 3 года назад

@@CaseysCustoms gotcha

@nickmoore6727 2 года назад

Q) Rubbed parts with clean stainless steel wire brush first?

@sgtrock68 3 года назад

Good info. It'd be interesting to play with. I saw where it said cast iron, but I can't think of a case where I'd trust that. I'm thinking striped out threads in aluminum heads or a cracked transmission case. I'm interested to try the stuff out.

@jimjakosh2506 Год назад

It fills stainless, but how well does it weld stainless to stainless. Have you tried a product called Sanrico?

@zombaezombae1560 Год назад

On the handle example do they both have to be aluminum? like aluminum to aluminum welds only?

@robertkirchner7523 2 года назад

Might sand, wire wheel, degrease, to clean metals first before brazing. Does not work well on dirty surfaces. Bob

@bobelkiniii1461 3 года назад

Now to find your 1st video on these rods

@alicer-w878 3 года назад

Thank you. You basically answered my question about the steel. Great Video :)

@CaseysCustoms 3 года назад

👍👍

@richardnanis 4 года назад

I didnt see the result for the 2 copper stripes - did they hold at the end? You just blended over to brass rods which didn't. Would be great if this works on pure copper - so you could weld copper and alumium together. I doubt it would be really strong as there is nothing like alu-copper alloy.

@CaseysCustoms 4 года назад

richardnanis it held the copper together but it was no strong at all. So kinda yes and kinda no, i think trying to bond both aluminum and copper would be a good test I’ll have to try

@richardnanis 4 года назад

@@CaseysCustoms I managed to solder a copper cable strand on an aluminium plate with normal electronics tin solder. You have to work the hot tin real hard into the alumium and clean the aluminium very carefully just in front. You scrab and rub the tin into the aluminium - then it will work. But its a hard process and results are more less unpredictable. Its a little easier with plumbing tin (sn97cu3) and some plumbing flux.

@AxleRods 4 года назад

This is like soldering on the next level lol thanks for the vid bud!

@CaseysCustoms 4 года назад

alexmaland614 ty!

@montejones3533 3 года назад

What about filling holes left from body trim holes?

@CaseysCustoms 3 года назад

Sorry no, these don’t work on steel

@kylebailey2703 3 года назад

Just figured out their Blue Demon....has a Blue Demon poster hanging in the background.

@CaseysCustoms 3 года назад

These ones yes, my first vid are off some Facebook ad

@donaldpatton1560 4 года назад

I think family dollar is missing a shopping cart

@Mr.SoRandom 4 года назад

Would this work on plugging up oil pressure sensor hole behind the engine block made of aluminum???

@CaseysCustoms 4 года назад

Rene Martinez idk honestly. I’ve seen them used in pressurized aluminum radiators so i would think so. Problem is the metal has to be extremely clean so that might be tricky on an engine block.

@joshnabours9102 3 года назад

Based on an older matthias wandel video where he tested the strength of a T joint made with these, they can hold well for sheer strength but are really bad at holding up to torque or rotational forces.

@CaseysCustoms 3 года назад

Ahh that’s good to know

@topherdean1024 4 года назад

I'm thinking of making screen frames out of stainless bar stock. Can you weld two pieces of stainless steel? What's the actual name of the Blue Demon welding rods you're using?

@CaseysCustoms 4 года назад

Topher Dean sorry man stainless is the same as regular steel as far as weld ability, i know that from all the stainless tig welding I’ve done. So it’s not gonna work. I believe they are called blue demon aluminiweld rods.

@ericsprado4631 3 года назад

Would you say what your heat source is.. Is that simply a propane torch??

@CaseysCustoms 3 года назад

Yes just a simple handheld propane torch

@Leblueskee 3 года назад

I’m getting ready to make a fold out bed in my Jeep and I’m so tempted to try and make an aluminum frame using this stuff

@CaseysCustoms 3 года назад

I’ve seen it done, go for it!

@aussieatheist960 3 года назад

I made a queen size bed base for our camper trailer out of 25mm*25mm*1.6mm tube using this method. The bed base hasn't failed my wife and I after a year of camping and is still holding up strong 😉

@CaseysCustoms 3 года назад

@@aussieatheist960 good to know!! Lol

@Ed-ev7xc 4 года назад

Are those the commercials where they weld a hole in a soda can if so can you recreate that

@CaseysCustoms 4 года назад

jay kubla yes they are. I was going to do that but didn’t bother since a can is so extremely thin. 99.99999% of metal isn’t that thin so it’s kinda a useless trick. At least in the car world

@freshram192 4 года назад

Would this work for a small crack in a jon boat on the side rail on top?

@CaseysCustoms 4 года назад

Yep, I’ve seen guys use them on aluminum boats!

@kkutube1972 4 года назад

Yep, I have those questions because I had to cut my safe. It would be nice to weld it back because it just need to keep the kids out. Thanks

@CaseysCustoms 4 года назад

Keith Koch no ty!

@TheHelado36 3 года назад

I though this was only for aluminum !

@CaseysCustoms 3 года назад

Al’most all non magnetic metals.

@gailpengelly8581 3 года назад

Me too!

@PianistsRavel 4 года назад

Excellent video, I bought it because I want to keep in place 1/4 nuts that eventually come loose because of the vibration of the motorcycle, while waiting for the product I used Blue Thread Lock and it's held up about 400 miles of clutch shifting utilizing the connections. Should I wait to see if it comes loose or do the weld now? Thanks in advance.

@andrewcollins4458 4 года назад

If the nut is steel it wont work and if the assembly is large you wont get the temp needed with a normal torch as in the wheel rim in this video

@samwarren4104 4 года назад

Stick with loctite

@teotrujillogomez797 3 года назад

U think it work on a power steering pressure pipe to fill it out a small hole

@CaseysCustoms 3 года назад

If it’s aluminum i would say yes. Guys have used these on radiators

@fredjones1238 3 года назад

did you try it on thin gauge fender metal

@CaseysCustoms 3 года назад

Fenders are steel and these only weld aluminum. Some fenders are aluminum but not any i work on lol. It would work fine on any aluminum. 👍

@bobelkiniii1461 3 года назад

Ok you got me I subscribed and liked and even commented..... I got a question my Ltz 400 has a aluminum radiator and it has a overflow tank bolted to it well at the base of where those bolts bolt in there’s cracks that leak ..... do you think I should clean with acetone before wirebrushing then welding with one of those blue demons rods or should I skip the acetone and just wire brush and weld

@CaseysCustoms 3 года назад

Can never get aluminum too clean for welding. 👍👍

@moforockband 3 года назад

Would this product work on motorcycle engine cases/ ally cast motorcycle blocks/heads? Thx for the vid.

@mickholgate3347 5 лет назад

good vid mate! surprising how strong the handle held up too

@CaseysCustoms 4 года назад

Mick Holgate held up great!

@kyleclemente5939 3 года назад

Good video. I feel like you didn't get the base metals to the right temp before you started this welds. Regards, 2 cents

@CaseysCustoms 3 года назад

They all got plenty hot, certain metals just can’t be joined with these rods. Some of the stuff i tried in the video would of never worked regardless of what i did.

@CaseysCustoms 3 года назад

Thank you btw. 👍👍

@bergfpv6486 2 года назад

I was thinking the same thing. I'm no welder, but I learned to solder when I got into racing drone hobby, and if you don't heat up the material and solder enough to really flow properly, it has no strength to it. The welds I saw here looked barely melted. Besides, it takes forever to heat up. Not impressed with those rods.

@rirytv1820 3 года назад

For car gearbox can?

@simonbanderas3806 3 года назад

Thanks for the video man.

@stanleyforest5006 4 года назад

Does anybody know if it would work on a mini bike frame.

@CaseysCustoms 4 года назад

Stanley Forest if it’s Aluminum it will. I would trust a tig welder a lot more, but it should be fine

@scotthillary4393 4 года назад

how bout doing it upside down in a boat bottom?

@CaseysCustoms 4 года назад

Scott Hillary yep, I’ve seen guys use it to repair boats on RU-vid

@rahmyssun1690 3 года назад

Is there any video that you heat up again the welded part?

@rahmyssun1690 3 года назад

Did it melt?

@jessicacopeland1644 3 года назад

The only place I see where you would need to weld instead of using these rods, is where you need penetration and/or flow. These rods don't flow well at all... even under pressure. The good ones have a very minimal amount of magnesium and copper in them, so you shouldn't reheat the material after it's applied.

@MrZodiak81 2 года назад

You need to prep the surface better it needs to be shiny

@gageputman7084 3 года назад

One word these products tend to forget to include in its descriptions and directions...will bond to thin non-magnetic metals.

@jessemuratalla826 4 года назад

You're supposed to clean the material first thats why its not working on all those different materils

@CaseysCustoms 4 года назад

All the materials have been cleaned, This stuff doesn’t just stick to anything.

@ls4.8frank 4 года назад

@@CaseysCustoms bro the surfaces were not prepped properly man, come on, be fair in the review because I have seen this done on various metals.

@therookiefisherman5234 3 года назад

You are not supposed to heat the rod.

@pedrobarrios2419 3 года назад

You keep putting the flame on the rod......

@richardnanis 4 года назад

I just tried my soldering rods yesterday and they didn't work at all. They just melt when the aluminium material itself melts down. I tried several times: they dont melt on the hot metal unless the metal itself starts getting liquid/soft. I couldn't come up with one single good weld. I got mine quite cheap from ebay china - probably got crap! I paid around 4 Eur for 20 rods - where did you buy yours? Did you hear of any fake material here? The chinese tend to fake everything from electronic parts to everything else nowadays... Better not buy from chinese sellers at ebay - its not worth the time and money!

@CaseysCustoms 4 года назад

richardnanis cheap rods sound like the problem, get them from blue demon weld, also you shouldn’t be getting the aluminum anywhere near hot enough to melt. The rods melt at low temps (like 700 degrees) and aluminum melts at like 1250. Also the good ones form blue demon aren’t expensive

@ls4.8frank 4 года назад

It will "weld" an aluminum wheel fine if you take your time to make it work correctly and then shape the repair area and repeat if necessary. This stuff is harder than a traditional weld so yeah....

@CaseysCustoms 4 года назад

Murrica Motors who said it wouldn’t? I said it would work fine but it would take you 30 mins hearing it up with a small torch so if you are going to the trouble to get a real torch out and heating the wheel up enough the tire needs removed you might as well have it tig welded for 20 bucks from somebody. So yeah, maybe watch the whole vid before commenting?

@ls4.8frank 4 года назад

@@CaseysCustoms I hear ya bro,but some folks can't afford to buy or use someone's torch so the smaller torch is what most of the targeted folks will be using.

@HighlanderNorth1 3 года назад

It didn't actually require deception in marketing to be somewhat impressive, so i don't really understand why they chose to lie anyway!? It would probably sell well, if honestly marketed towards use for aluminum repairs, bonding and light stainless steel repairs(plus whatever else it was good for that I'm forgetting right now).... 🚫🤔 It's like if I developed a good quality circular saw, but I still chose to advertise it for being good for sawing, AND drilling and hammering and lathing! If the saw is good at sawing, why not just leave the advertising at that? 🥴

@johnsmith-qp3xw 3 года назад

look, I want you to return my shopping cart.

@CaseysCustoms 3 года назад

I bought it fair an square!

@TheUofastudent 3 года назад

Omg what’s wrong with your thumb !!!

@CaseysCustoms 3 года назад

Huh!

@oldschooldiy3240 2 года назад

You're one of those "We don't need no stinking directions!" guys, aren't you? The directions say to wire brush and clean the surfaces to be joined....typical guy though, just jump in and go to heating and wasting rod....

@ls4.8frank 4 года назад

And it didn't bond very well on some metals because you failed to prep the surfaces as you should plus you did not want to take the time and be patient enough to lay in down properly and heat the metal properly. Most of your attempts were rushed.

@CaseysCustoms 4 года назад

Murrica Motors your dumb. You should google what this stuff is, it literally doesn’t stick to magnetic metals. So regardless of how well it is prepped, because it was all wire wheels and cleaned before the tests, it’s never going to stick to steel.

@ls4.8frank 4 года назад

@@CaseysCustoms wow guy straight to the bs huh? I think you are the dumb one because others have done it so why can't you? You talk big over the internet don't you? And if you say those pieces were cleaned properly and prepared properly you are the idiot here.

@CaseysCustoms 4 года назад

Murrica Motors Lol. Talking tough? I just called you dumb because you are saying that i didn’t clean the metal well enough to make them stick, when that had nothing to do with wether it will stick or not. Show me someone who has used these on regular steel and I’ll apologize to you..... since they don’t work on steel I’ll hold my apology.

@ls4.8frank 4 года назад

@@CaseysCustoms brother it was very clear to see the lack of preparation of the surfaces, wasn't just me saying it either, but I'll be your Huckleberry. I love it when people wanna get stupid over the internet and act all tough. Keep on keeping on guy!

@CaseysCustoms 4 года назад

Murrica Motors Lol he says in the video it will not stick to steel other then galvanized steel. Lol you proved me right! Thanks bro. Hahaha