RFNoC Getting Started Video Tutorial

Подписаться 3 тыс.

Просмотров 13 тыс.

50% 1

RFNoC Getting Started Video Tutorial - USRP X300/X310
This video is based on the App Note located in the Ettus Research Knowledge base: kb.ettus.com/Getting_Started_...
Table of Contents
00:00 Welcome
02:00 Prerequisites
03:05 Download and install Xilinx Vivado tools
12:24 Creating/Installing the Development Environment on your PC
23:45 Testing the Default RFNoC Image
28:51 Building from Existing RFNoC Blocks
38:44 Load Compiled FPGA Image and Verify Contents
34:45 RFNoC Default Image and GNU Radio Flowgraph
42:38 Creating a Custom RFNoC Block (RFNoC Modtool)
47:00 Editing the Skeleton/Template Verilog code
50:54 HDL Testbench/RFNoC Testbench Architecture
56:19 Compile Custom RFNoC Block
1:06:40 Creating Software/Host portion of Custom RFNoC Block
1:16:26 Testing Out the Custom Block in GNU Radio (GRC)

Наука

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8

@xingjianchen2161 5 лет назад

Thank you! I have watched this several times in different days and each time give me useful information.

@Aemilindore 5 лет назад

An excellent video. Nicely explained.

@JM-po9vb 6 лет назад

Note: at 1:25:20 in the video, it seems that now the command line -I parameter must now point to the rfnoc-tutorial directory, not the rfnoc-tutorial/rfnoc/fpga-src directory as stated. Also in the GUI to add OOT blocks, you will need to use the rfnoc-tutorial DIRECTORY, not the file as specified in the video. Otherwise command line execution will fail synthesis and in the GUI you won't be able to add OOT blocks.

@JM-po9vb 6 лет назад

.. correction: time is 01:02:00

@jolu1989 3 года назад

If you have already installed UHD and GNU RADIO before doing this procedure, Do you recommend to remove and reinstall them?

@neeehaaaaaa 5 лет назад

hi i am new usrp , i am using b200 mini in window , I am not getting Idea how to start in window, as i install, uhd,git . Is there any getting start video for window to for any device using xilinx ise (vivado will also work as i ll get some reference)

@rahulbathini2214 2 года назад

Is there a way that we can update the gnu radio variable such as gain and other usrp related variables from the terminal during run time. I found out how to do it if we need to initiate the application with certain variables, but none on the fly.

@huugovale 3 года назад

I`m getting a error at 86% in pybombs install home/hugo/rfnoc/src/gnuradio/gr-uhd/lib/usrp_source_impl.cc:612:61: error: ‘RECV_MODE_ONE_PACKET’ is not a member of ‘uhd::device’ ::uhd::device::RECV_MODE_ONE_PACKET, I`m using ubuntu 18.04 Do you have any idea how to fix it?