RGH3 Made Easier with the Slim PLL QSB - Overview & Install!

MrMario2011

Подписаться 227 тыс.

Просмотров 42 тыс.

50% 1

Get $5 towards your first order on PCBWay by joining here: pcbway.com/g/3WcBa9
RGH 3.0 has been covered a few times here on the channel from the initial release of it, to tutorials covering all of the compatible motherboards. RGH 3.0 greatly simplifies the hardmodding experience for the Xbox 360, requiring only two wires and a resistor for the Xbox 360 Slim consoles. Element18592, also known by The Mod Shop, created and open sourced a quick solder board shortly after the release of RGH3, to help clean up and make the install process easier for Slim consoles. After doing a few installations using direct wire methods, I finally take the plunge into building some of these QSBs and giving an install a try. Let's see how to use this QSB, install it, and determine just how much easier this really makes the RGH3 process!
Sponsorship Disclosure: This video has been sponsored by PCBWay. The Slim PLL QSBs were provided for free by PCBWay in order to make this video.
#RGH3 #Xbox360 #Xbox360Modding
This video has been made with Fair Use in mind and has been created as an educational piece of media.
--------------------
Timestamps!
0:00 - Intro
3:07 - Video Sponsor: PCBWay
7:44 - Console Teardown
9:32 - Preparing RGH3 Points
10:40 - Preparing the QSB
12:58 - Exposing PLL_BYPASS
16:03 - Installing the QSB
17:56 - Soldering RGH3 Wires
20:10 - Building a RGH3 NAND
22:32 - Final Thoughts
--------------------
Product Affiliate Links:
Xbox 360 Console:
Amazon - geni.us/6T16Nnd
eBay - ebay.us/4aan93
Xbox 360 Hard Drive:
AliExpress - s.click.aliexpress.com/e/_9vJZ89
Amazon - geni.us/Xbox360HDD
eBay - ebay.us/hm0jO6
Xbox 360 Postfix Adapter:
AliExpress - s.click.aliexpress.com/e/_9JM16T
Amazon - geni.us/pERL
eBay - ebay.us/jyVjd9
1K Ohm Resistor:
AliExpress - s.click.aliexpress.com/e/_9vvYsx
Amazon - geni.us/xBq6hK
eBay - ebay.us/o9YgCD
3K Ohm Resistor:
AliExpress - s.click.aliexpress.com/e/_Dna...
Amazon - geni.us/nTi2
eBay - ebay.us/hD0WwM
Raspberry Pi Pico:
AliExpress - s.click.aliexpress.com/e/_A0bqZv
Amazon - geni.us/XUS5Szr
eBay - ebay.us/V6fH6n
T8/T10 Screwdrivers:
AliExpress - s.click.aliexpress.com/e/_AVAmv1
Amazon - geni.us/yzIe5Vn
eBay - ebay.us/zwb5fy
X-Clamp Removal Tool:
AliExpress - s.click.aliexpress.com/e/_A5Mx3I
Amazon - geni.us/NhM4i
eBay - ebay.us/5Qfha8
X-Acto Knife:
Amazon - geni.us/q1q5J2b
eBay - ebay.us/9tekbD
30 AWG Kynar Wire:
AliExpress - s.click.aliexpress.com/e/_AtyWUN
Amazon - geni.us/DXP0j
eBay - ebay.us/z1VaZF
Soldering Tools & Products:
US - www.amazon.com/shop/mrmario2011
UK - www.amazon.co.uk/shop/mrmario...
--------------------
Downloads & Links!
Slim QLL QSB:
github.com/Element18592/360-S...
Octal's Console Shop with J-Runner Download:
octalsconsoleshop.com/
PicoFlasher:
github.com/X360Tools/PicoFlasher
How to RGH3 a Xbox 360 Slim (Trinity):
• How to RGH3 a Xbox 360...
How to RGH3 a Xbox 360 Slim (Corona):
• How to RGH3 a Xbox 360...
--------------------
Social Media & More!
Discord: Discord.Me/MrMario2011
Patreon: / mrmario2011
Second Channel: / ipsychozoa
Twitter: / mrmario2011
Facebook: / mrmario2011
Instagram: / mrmario2011
Twitch: / mrmario2011
--------------------
Song Information
Artist: pyama
Song: slipspace
Soundcloud: literalbagoftrash
Link: / literalbagoftrash
--------------------
Any links specifically listed as affiliate links give me a small monetary kickback at no extra cost to you and no influence on the content.

Игры

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@dangerdoes689 Год назад

I did rgh3 as my first hardware mod on a console. Its not too bad even without the sponsored stuff here. Just as he said, take your time scratching up the PLL point and you will be fine. Plus coronas don't need the resistor but I went back in and added one after the fact just to be on the safe side

@parknich081 10 месяцев назад

did you succeed @@Powder_actuated_lead-

@rogerfloyd852 7 месяцев назад

Yeah this coward is a shill

@ScottBradley-gd7sl 3 месяца назад

Good luck@@Powder_actuated_lead-

@retrogamer2323 Год назад

Suggestion: Don't tin both pads for the smd resistor. Just tin one side, tac your resistor in place, then solder the other side. Great video as usual.

@MrMario2011 Год назад

Thanks for the tip!

@Tieigo0 9 месяцев назад

It's amazing that he took advice from one of his commenters and actually used the tape method to sort down the scraping away the point.

@MrMario2011 9 месяцев назад

Love a helpful community!

@shanez1215 Год назад

I love this QSB since it lets you change the wires if need be (for Viper V3) and avoids any stress being put on that tiny PLL point. Also the resistor install is a lot neater with it

@MrMario2011 Год назад

Absolutely! A great addition.

@aurismat_main 10 месяцев назад

Great video! Ever since my first failed Corona mod about 10 months ago I've tried to RGH a couple of Trinities, and I always had difficulty making the PLL_BYPASS point to hold onto my wires properly(probably a soldering skill issue on my end). Ordered a bunch of these QSBs, as they seem a great way to avoid having any issues soldering up that hard-to-hit via further down the line.

@karlmee1234 Год назад

Good stuff man. I remember doing soldering of small resistors like that at trade school, we dropped them on the floor so many times and lost them 😅. Trying to solder them in without a microscope is painful, holding them with the correct size tweezers does help

@MrMario2011 Год назад

Love that microscope.

@bryancampbell4604 Год назад

Element is such a great person. Loved throwing ideas back and forth with him.

@MrMario2011 Год назад

Good dude for sure!

@mikestribling7574 Год назад

I had a lot of trouble with SMD until I got solder paste and a hot air work station. Total game changer

@MrMario2011 Год назад

Tools make all the difference!

@ljfsdlfksjg 2 месяца назад

Oh man... Just attempted this. Trying to solder to the PLL point was a pain using the QSB... I ended up getting annoyed and cutting off that part of the QSB and instead soldering a wire between the PLL point and the resistor on the QSB.... might have been easier to forego the QSB entirely heh But enough of me complaining! Thank you for posting this video and your other video on how to RGH3 a corona xbox, they were extremely helpful :)

@MrMario2011 2 месяца назад

Sorry to hear, that's surprising it was more difficult, but it sounds like you made it work? 🤣

@randominternetbro6562 Год назад

Sponsorship! Nice! I feel like Ive wondered about that for your channel before. I always thought "would sponsors be able to support a channel celebrating consile modding and bypassing security?"

@papi1999 Год назад

Need to try this on my own time it would be a fun Hobby!

@PCBWay Год назад

THX a ton for your Support and Trust, Mario 🥳

@MrMario2011 Год назад

Thanks for the opportunity! 🔥

@TonyPrints Месяц назад

@@MrMario2011 pin this comment

@Andrew-kw9kq Год назад

i can see why this is easier for people who are new to soldering, id recommend buying a qsb that already has the resistor if you are new as that could be pretty difficult

@MrMario2011 Год назад

For sure, although the sellers I've seen seem to include one or both for you to install. Since the installer might have to use different values for different consoles.

@MrBlingBlingNr1 Год назад

I prefer the wire method. Done now nearly 15 consoles. PS: You should use a toothpick for flux instead of the q tip ;) works better

@MrMario2011 Год назад

For sure, I need toothpicks but don't have them on hand since I don't ever use them 😂

@Notpoop906 Год назад

nice video bro. i wish I kept more of my 360s because I had one I could have saved with such an easy RGH hack. I still have one of the fat systems with the original LPT JTAG method installed lol

@MrMario2011 Год назад

So happy we don't need LPT these days

@hersnab 2 месяца назад

So grateful for your channel, thank you.

@MrMario2011 2 месяца назад

Welcome!

@81milliontotallylegitimate10 Год назад

Small tip. When you solder those small resistors, just put solder on one pad and tack it down first. Then apply solder to the side.

@MrMario2011 Год назад

Definitely a good tip! This is how I used to do it with controller LEDs, but I've been out of practice so this sounds better.

@xRequiKz 11 месяцев назад

is it just me or does the pico flasher stop working after few consoles

@razredge68 Год назад

I'd love it if they would release a QSB with JST or similar connectors for reading the NAND. All those wires bunched together makes soldering them a pain. My trinity with RGH2 went well but if I ever have to dump a NAND on another system I'd want QSBs.

@MrMario2011 Год назад

There's already a couple of options out there! You could do what XDK consoles do, which is install pinheaders to the NAND points. Alternatively, Team Xecuter did indeed release NAND read/write QSBs. They weren't widely used and haven't been made for a long time now, but I had a set of them installed in my first RGH.

@theAKBOURNE 4 месяца назад

Thanks for another great video! So when you remove the xbox 360 slim cpu fan is there a retainer clip or you you just wiggle and pull?

@MrMario2011 4 месяца назад

I have not needed to pull the fan off of the heatsink itself.

@patrickmason7205 20 дней назад

I bought a pre-soldered QSB and it bricked my console because the resistor wasn't soldered on properly. I am very new when it comes to soldering and my second go around I was successful instead of trying to solder that tiny resistor on the board, I just spliced a big 10K resistor in a wire and I don't know if this matters but I put solder in the gap where the resistor should have went and it worked for me.

@MrMario2011 19 дней назад

That would work since you are bridging the pads, so it would be the equivalent of a single wire.

@Hellraiser988 Год назад

Love your aquateen hunger force refrence

@MrMario2011 Год назад

WHO IS THE DRIZZLE

@Hellraiser988 Год назад

@@MrMario2011 hey Carl what's that protein bar you are eating there

@MrMario2011 Год назад

South Bronx Paradise, baby 🔥🔥🔥🔥🔥

@bennanstad5536 Год назад

Hey there! 2 quick questions, What solder do you use and at what temperature? Thank you :)

@MrMario2011 Год назад

Solder I have linked in my Amazon store in description, I run it at about 370°C

@jjhack3r 10 месяцев назад

I think i missed ths part where this is easier... it looks to be more trouble so I'll just do the 2 wires and a resistors method in the video you made a year ago.

@MrMario2011 10 месяцев назад

SMD resistor goes on the board, after that the board install to the motherboard itself is easier than 2 wires.

@EV4NSY Год назад

I have a problem with a console. Ive done 5 consoles using RGH3 and not had any issues what so ever on both Trinity and Corona motherboards. My friend tried to do a trinity and it worked fine. He booted up GTA VC for the OG xbox and it randomly shut off. He did some checks etc and said nothing seemed out of place. He was testing his wires and pulled up a bit too hard on the POST point ripping up the cable and solder. Since then he has tried to fix it and eventually dug a hole on the POST point and if that post point gets any solder on it what so ever. The console will chime and wont power on. BUT if it is clear of solder it will just perma boom. It chimes and the fan stays on and eventually speeds up to insane speeds. I of course bought it off him for £20 as spares as repairs incase i needed some additional parts but have tried to fix it instead. He did already expose the POST point on the other end of the board and wire up to that and has the same effect of chiming > fan stays on > i turned it off. I have redone the wiring, soldering, changed resistors and no luck. Even tried to make it boot retail as he sent me the original nand files etc. No luck, do you or anyone reading this have any ideas? Im not at a loss if it wont work as ill use it for parts but be nice to see if i can get it working again.

@MrMario2011 Год назад

Get a Postfix Adapter, use that, be done with it.

@EV4NSY Год назад

@@MrMario2011 Perfect thank you lool. Ill give that ago :)

@ryanmontgomery504 Год назад

I've gotten pretty discouraged during my RGH journey. I've bricked several consoles and only been able to do one successfully. In your opinion, what is the easiest motherboard to RGH?

@MrMario2011 Год назад

In my opinion? Trinity. That's the first one I ever did a RGH on my own for, and they're hearty systems. Less issues with wire routing than Phats, and less temperamental than Coronas.

@silenteyebros Год назад

Hmm, what version of j runner extras are you using? Whenever I run xell with ethernet on mod it always locks up

@MrMario2011 Год назад

The latest.

@saifurrehmanshahid4669 Год назад

15432 releases RGH3, a RGH 2 wire method for all motherboards except Xenon, Zephyr, and Winchester that does not need a glitch chip etc.. other than just business promotions.

@MrMario2011 Год назад

I've covered it extensively! And I needed those emo PCBs

@grantashby989 8 месяцев назад

quick question im thinking about doing this to my trinity but it has not been updated since 2018 running 17526 should i stay on this dashboard or update to most recent its a non modded console atm

@MrMario2011 8 месяцев назад

No difference.

@happyputt9709 Год назад

Thanks

@MrMario2011 Год назад

You're welcome!

@djcobra31 Год назад

Nice One!

@MrMario2011 Год назад

Thanks!

@thatslow4.6 Год назад

So I had a few questions, Even If I purchase that $200 microscope you have linked will it be easier to do a RGH3? I have 2 Coronas one I already modded with a glitch chip years and years ago, But kind of forgot the entire process of all this and mostly stressed to attempt this once again, My other question is what is mainly needed to complete a RGH3 glitch? Just don't want to purchase a ton of things that arent needed.

@MrMario2011 Год назад

Having a microscope definitely makes work like this much easier, but is not a requirement. I'd recommend you watch my RGH3 tutorials related to the console you want to work on, since those will be much more in depth than this video and will answer the questions you have.

@matt4193 Год назад

Can this be done in a fat Xenon (no HDMI) 360? I cant find any info, just some posts about lower dashboard versions and whatnot

@MrMario2011 Год назад

EXT_CLK for that.

@SN0WMAN801 11 месяцев назад

do you have to tick the PCB Assembly when ordering or no need?

@MrMario2011 11 месяцев назад

Nope, since you assemble it yourself.

@mmmmfriedchildren3810 Год назад

Do i need both the QSB and postfix adapter for my xbox 360 e or just the QSB?

@MrMario2011 Год назад

Postfix is needed for Corona v3-v6 models, the QSB here is optional but makes RGH3 easier.

@nicholasjjacob 11 месяцев назад

Does this work for all Corona V1-6? Does this replace the post fix adapter for v4-6? Thank you!

@MrMario2011 11 месяцев назад

Works for all Slims, does not negate the need for a Postfix Adapter.

@nick7227 15 дней назад

Hi MrMario. I’m doing my first rgh in a couple weeks. I got a broken Trinity console to practice on before I do the real thing. I bought the QSB but I have heard quite a few people say that it makes the RGH more difficult. Is this true? Is it simpler just to use wire and a regular resistor?

@MrMario2011 13 дней назад

From my experience? If you've never soldered before, It could be more difficult. If you have enough experience soldering, it is easier.

@NotttC Год назад

Hey, I followed your corona guide with my 360 e however I ripped the pad for db3, is there an alternative pad that I can use or an I sol

@MrMario2011 Год назад

Elite models were Phat systems, a Corona video shouldn't be followed for that.

@NotttC Год назад

@@MrMario2011 you're right I mixed elite with the Xbox one style E model.

@mr.teslatech6277 2 месяца назад

What wires do I need for the pico flasher and where do I get them?

@MrMario2011 2 месяца назад

I have wiring I use in my Amazon Shop link in the description, but I believe I used some 26 AWG wire.

@retro_online6927 Год назад

Hi I love you your video Made my life easier Thanks 😊😊 Anyway I have Winchester 😢😢 Is there any way to go through 😅😅

@MrMario2011 Год назад

Sadly nope.

@WhosDeon Год назад

Definitely the tiniest resistor I’ve ever installed 🤣 smaller then a dust bunny

@MrMario2011 Год назад

0603 is still the smallest I've gone, but 0805 is still a small one!

@supermahmoud Год назад

Is there any new method to RGH a Winchester 500G ?

@MrMario2011 Год назад

@ingusmant Год назад

So this only works for the slim? Won't work on a jasper?

@MrMario2011 Год назад

This PCB is only for Slim consoles.

@onkiebarz4389 7 месяцев назад

Quick question. Does this works to XBOX 360 E model?

@MrMario2011 7 месяцев назад

As long as it's a Corona motherboard.

@pedrohenriqueboscofi Год назад

ooooh that's what I want

@MrMario2011 Год назад

It's here for everyone!

@Clarkane Год назад

i got a rgh3 console with no display and a bad post fix i bought another post fix adapter and soldered the glitch chip back in place and still no display, although after upgrading to rgh3 on this corona i still dont have a display signal lol, any ideas?

@Wmtechzm Год назад

Which type of Corona and also check the rams types

@MrMario2011 Год назад

You can't properly troubleshoot until it's reverted to stock.

@Clarkane Год назад

@@MrMario2011 I can't, I'm not the 1st owner

@Wmtechzm Год назад

@@Clarkane check if the rams are winbond if yes tick on winbond rgh3. 0 then write ecc it will work

@Wmtechzm Год назад

If possible bad gpu or south bridge

@FrankHUN Год назад

This is work with Slim E ?

@MrMario2011 Год назад

As long as it isn't a Winchester

@androidandpctechtips7525 6 месяцев назад

In MrMario We trust

@MrMario2011 6 месяцев назад

BasedGod

@Pandabaerchen88 Год назад

Use next Time a Fiberglas Pen! For PLL. It´s much easyer

@MrMario2011 Год назад

I feel like those would be too big for how small this via is to expose.

@Bringmejoycon Год назад

What flux do you use?

@MrMario2011 Год назад

Kingbo RMA218

@Bringmejoycon Год назад

@MrMario2011 thanks buddy, great video by the way, I'm interested in trying this just because it seems like if ordered in bulk the qsb would be cheap and nice looking

@user4gent416 Год назад

Whats up! I already have an RGH3 xbox made myself

@MrMario2011 Год назад

Yo same

@Flashy7 6 месяцев назад

I think this did not make it easier, and instead of using a through the hole resistor, you have to solder 2 more tiny points at the smd resistor. The pcb itself is neat though, but for not much advantage...