Tools Required
All sockets are 6 point
8,10,15,16mm Sockets
15mm Wrench
3/8 Ratchet
3/8 Small Extension
3/8 6mm Allen Socket
3/8 T30 Torx Socket
1/2 Breaker Bar
1/2 21mm Deep Socket
Wheel Torque Wrench
Flat head screw driver or trim pry tool
Blue thread locker
Make sure to create your own diagram for the belts or use mine. Ensure they are sitting flush before you start the truck.
We started the truck with the air filter off to ensure they were seated correctly, it created a check engine light, I cleared it with my Tazer.
If you disconnect the negative battery terminal, you will loose the performance pages for a few hours. It will come back.
Power tools will help minimize physical labour, a leverage bar or pipe will help with breaking the crank bolt loose.
The total process took about 2.5 hours, filming took up some time.
Special thanks to my buddy for helping me with the install. It would of taken me an eternity to install it without his help!
IG-drysdalematt
You can notice the 2psi of boost at Wide Open Throttle.
Use this tutorial at your own risk, I am not responsible if you have any errors or issues.
Please feel free to ask any questions!
As of July 1/21 this kit does not include TRX specific instructions.
Also ENSURE YOUR CRANK BOLT IS TORQUED TO 148LBS + 150 DEGREES.
DON'T WASTE YOUR MONEY ON THIS PULLEY, DO IT RIGHT AND BUY THE FAS PREDATOR PULLEY!
2 июл 2021
