ROCK CRUSHER BUILD | Impact Mill For Gold - ask Jeff Williams

Подписаться 334 тыс.

Просмотров 316 тыс.

50% 1

we Built our Rock Crusher ( Impact Mill ) to pulverize Gold Ore and we show you how you can build one too from common items you can buy anywhere.
__
SUBSCRIBE BY CLICKING THIS LINK: / @askjeffwilliams
FOLLOW ME ON THE WEB AND GET BEHIND THE SCENES :
Instagram- / lila_the_explorer
Patreon - / askjeffwilliams
Web -- www.askjeffwilliams.com/servic...
Facebook -- / ask-jeff-williams-1414...
Links to equipment used in my videos:
Gold Panning Equipment :
Panning Stand: amzn.to/2YQnkI1
Garret Super Sluice: amzn.to/2yTbBsv
Garret Gold Panning Kit: amzn.to/2H4Skc9
Snuffer Bottle: amzn.to/2yYyw5C
Mining Tools:
Jewelers Loupe 10x: amzn.to/2Z5xaRy
Estwing Rock Pick: amzn.to/2Z1tCzt
Hard Hat w/ Light: amzn.to/2YH3PRX
Light for Mining Hard Hat: amzn.to/33t0BjH
2 mode Light for Hard Hat:amzn.to/2H4TkNp
Large Paleo pick: amzn.to/2H4XgxA
Metal detecting equipment:
Whites TRX Pinpointer: amzn.to/2H39siy
Falcon MD 20: amzn.to/2Kxhp1I
Whites GMT w/ extra Coil: amzn.to/2KGROCj
Garret ATX Metal Detector: amzn.to/33rDG8o
Minelab Gold Monster 1000: amzn.to/2Z9erIV
Minelab GPX-4500 Metal Detector: amzn.to/31JKUDh
Minelab GPX 5000 Metal Detector: amzn.to/2H3GPSt
Minelab GPZ 7000 Metal Detector: amzn.to/2MZe6Sm
Large mining equipment:
Gold Hog Multi Sluice: amzn.to/2TptCZ5
Gold Cube: amzn.to/2TrH26J
Gold Cube Trommel: amzn.to/2TrH26J
Gold Hog Sluice: amzn.to/2H3lLeu
Cobra Crusher: amzn.to/2KtAJge
Hammer Drill: amzn.to/2yWoqCl
3 by 4 Jaw Crusher : www.911metallurgist.com/equip...
Impact Mills : www.makeyourowngoldbars.com/ro...
Filming Equipment:
Cannon EOS Camera: amzn.to/2yWE94m
Microphone for camera: amzn.to/2MXo72l
Go Pro 7 Black: amzn.to/2Kx4KvH
Editing Software: amzn.to/2YYa52R
Adobe Premier Pro: amzn.to/2H2D27P
Books :
Gold Mining in the 21sy Century: www.amazon.com/Gold-Mining-21...
Fistful of Gold by Chris Ralp : www.amazon.com/Fists-Full-Gol...
Follow the Drywashers: www.amazon.com/Follow-Drywash...
Prospecting for Hardrock Gold: www.amazon.com/Advanced-Prosp...
OTHER VIDEOS YOU MAY LIKE:
RICH GOLD VEIN FOUND !!!! Epithermal Deposit.
• RICH GOLD VEIN FOUND |...
Sluice Box Set Up.
• HOW TO FIND GOLD | Slu...
Biggest Clean Up in RU-vid History.
• BIGGEST CLEAN OUT YET ...
GOLD in the SIDEWALKS of MANHATTAN.
• GOLD in SIDEWALKS of M...
THE GEOLOGY of GOLD !!! What Rocks and Minerals to look for.
• THE GEOLOGY of GOLD - ...
How to Find Gold !!! In Rivers and Creeks.
• HOW to FIND GOLD | In...
HOW to FIND GOLD with a BLACKLIGHT !!!
• HOW TO FIND GOLD | Usi...
ROCKS and GOLD !!!! Geology 101
• FIND GOLD in ROCK'S - ...
HOW TO FILE A MINING CLAIM !! Lode and Placer.
• HOW TO FILE A MINING C...
MINI JAW CRUSHER !!! For Gold Mining.
• JAW CRUSHER | For Sale...
GOLD FROM PYRITE !!!! How To Do It
• GOLD FROM PYRITE !!!! ...
Secret Gold Mines
• Secret Gold mines
So you know what I am gonna say huh....you better...
So C'mon....Let's Go !!!!!
#askjeffwilliams #buildarockcrusher

Хобби

Опубликовано:

25 авг 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 374

@mafic_taco7061 2 года назад

Ah yes, bloody good film old chap

@Danhurd 10 лет назад

Hi Jeff, Thanks again for the videos. I'm in the process of making an impact mill myself. One question I have been struggling with is the output screen. If I want 50 mesh coming out does my screen need to have 50 mesh holes? When you say yours is putting out -50 mesh dust, is that the average size, or is that what your screen will allow. I don't know how to get a 50 mesh screen that would have any strength to withstand the rocks hitting it. I can get 1/8" or 1/16" punch plate easy enough.

@jefflawrence243 9 лет назад

Hello Jeff, Thanks for posting your video - you inspired my buddy Graydon and I to build one much like it for pulverizing the wild porcelain I know must be lurking around here somewhere. Jeff in New Mexico

@zackzimmer7167 Год назад

Watching these old videos, I cannot wait, for halloween this year!

@Askjeffwilliams Год назад

Me too!!

@tanksoldier9770 4 года назад

I'm going to see if I can round up enough stuff to build one of those thanks. TANK

@todcooper4707 8 лет назад

oh yeah , i need info on ones you build Thanks again Jeff for sharing your knowledge !!!

@AidanGieg 10 лет назад

They are simpler than I thought! Can't wait to make one of these

@indyme2 10 лет назад

Another outstanding video, Jeff. Great job. Keep them coming!

@Danhurd 10 лет назад

What size are the holes in your punch plate?

@michaelworkman158 10 лет назад

Nice video Jeff. Considering rock a crusher, as the gold bearing area near my house has gold locked in quarts. Not much but it is there. "Use the force" dates you man, I grew up saying that too....have a good day Jedi

@Askjeffwilliams 10 лет назад

I was wondering if someone would catch that. Ya I am an old fan of the Force and a Trekkie too. Jeff

@ryansmith9847 8 лет назад

Always like your videos my man, but this one really entertained me. By far the best at what you do. Thanks for the videos.

@romi232 9 лет назад

I love your videos they have been great guides for prospecting. I even found some gold because of them, Thanks!!! I am wondering what you used for the housing. If you get a moment I hope you will enlighten me.

@aaa-yt8wl 2 года назад

Adamım tebrik ederim....makianan harika olmuş....ellerin dert görmesiinnn

@stanleystalvey6185 9 лет назад

Ok, I watched the video with a neck brace on and I really liked the technical presentation of your machine. You are like the mad scientist of Rock Crushing for Gold. Yet another great video and I admire all of your work. Keep 'em coming.! Tell Slim I said Arrrrrrgggggghhh.! We understand each other very well.. hahaha..

@Von_Weeden 8 лет назад

OK Jeff, that introduction was COMPLETELY over the top!!! loved it!

@Askjeffwilliams 8 лет назад

Thanks, always like being over the top. JS

@todcooper4707 8 лет назад

thanks Jeff good video now i know how a rock crusher works . and yes i need one too !

@glennlopez6772 2 года назад

Thanks for the video. This seemed like light promotional video but has really sound logic. It could be an inspiration for future designers!

@Askjeffwilliams 2 года назад

Glad you liked it!

@dennisraybowenjr9205 7 лет назад

thanks for the info!!!...I will be building one soon!!....

@RoMiCohl 10 лет назад

Great videos! Love watching and learning, keep it up!

@1uptospeed 11 лет назад

thanks for the lecture doctor williams on rock 101 .nice presentation. another great job their jeff..thats what i call class.

@SavageSanDiego2012 9 лет назад

Epic rap battles quote of Dr Who.. Excellent delivery. And yes. I need a rock crusher..

@Askjeffwilliams 9 лет назад

***** really glad you caught that. We always put small clues or additional info or references in our films. Jeff and Slim

@arenpeter849 10 лет назад

Thanks for the video Jeff. Would it be possible to get a complete parts list for building this. Specifically I would like to know how to make the plate that slides on the 1 inch shaft. Thanks

@paulmcguire3789 10 лет назад

this must be the third time I have watched this one and I still enjoy it and see something that I had missed before

@Askjeffwilliams 10 лет назад

Thanks Paul. we do plan on making a follow up on that one too for all the people out there that want to build one. Jeff

@jimhixson614 8 лет назад

That's awesome! Great idea!!

@gabewhisen3446 4 года назад

Your channel is doing good I googled rock crusher build and got one of your videos

@JamesSmith-ij9en 9 лет назад

you always amaze me Jeff! keep them coming

@Askjeffwilliams 9 лет назад

Jaye Smith you betcha, Jeff and Slim

@nqkoisii 11 лет назад

Hey that's really amazing.You are genius!Thank you for your great videos !

@smokinvr4 10 лет назад

looks fairly easy to build, I have about 3 buckets full of ore from old mine sites I am dying to see whats inside. Do you ever prospect the bumblebee area?

@dong6179 9 лет назад

Great video ! thanks Jeff ,You would make a great teacher.

@Askjeffwilliams 9 лет назад

donald growdon Thanks and I would love to do that. Jeff and Slim

@michelebogle9062 10 лет назад

i enjoy all of your videos. that is definitely one well made crusher. great design.

@DSurfer2007 10 лет назад

Very enjoyable to listen to your advice! Nice video!

@baldfatgit1 11 лет назад

Well done my good man very interesting i would say i am sure looking forward to the next vid on this fine subject. :) Steve from the uk.

@tomandamy1000 11 лет назад

Great vids Jeff . Entertaining and informative .

@mikefastuca8834 11 лет назад

Very cool Jeff. I wounder how productive the old stamp mills were.

@surfpanther 10 лет назад

Would love a video on how to identify quartz with gold to crush. A good start to finish video. keep making the great videos!

@MichaelWilliams-xs3bj 3 года назад

Wow, I didn't know you were a mechanic?! My dad owns an 8 bay tire shop and we do a lot of wrench turning. But, I have never seen so many books on different cars and parts until the video started. I am a newbie gold prospector if I am qualified for that level yet!! I have panned about 10 pans and zero yellow yet, well, I have had plenty of yellow mini pebbles in my pan. It is very frustrating but I will not give up! I have just the bare minimum tools so far but I enjoy being in a creek panning. I hope to have a mine lab gold monster 1000 soon. It is difficult to find gold without one! Anyway, it is cool that we have a few things in common. I changed the big rig truck and farm tires for 20 years and it broke my body down so now I have a ton of free time. I need some help first off with just knowing the names of the rocks and different ways they mix so I can find good rocks to crush and not waste time on junk rocks. Oh, My dad was born in Arizona I think. Not sure that is your home state or not but we also share the same great last name 😀! Could you please point me in the right direction of a book or website that gives really good pictures so I may learn faster?? I know a lot more already then I would have by watching your videos but that is not saying much for me. I never panned before the end of last week. I basically went and bought the Garrett kit with a half inch classifier and 2 pans. I am getting use to panning itself but I am sure to learn much more and develop my own style. I know you say go where mining has already happened. But, I have a creek running through my land and I wanted to make this my training grounds. A friend of mine assures me that gold has been panned on down the road from me on his land. I am just learning the ropes of where to look. There was a huge flood last year and it washed 15ft high place out of my bank and the water went very high on the land near the creek. I am not sure if I should pan where the water maxed or stay near the bedrock? Any help will be much appreciated!!! I hope to find some yellow shiny in my pan today!! And yeah, I'm gonna get wet! Sorry for the massive comment but I have watched soo many videos that I feel like I have known you for years! Once I learn the ropes I hope to come out and spend 3 days learning more!! I hope to get an ounce of gold this year to complete a goal. I may set it higher and so on because I already love the hunt for gold!

@dennispetersen1162 10 лет назад

I thought I was being clever an built a hand unit out of galvanized pipe. You know - Tin can get you pretty excited until you figure out that it's the galvanizing coming off. Your device looks to work a lot better than the hand unit I built (3 " black iron [now] with a 1-1/2" pestle). It works but not without some sweat! Good job - especially pointing out a different screen location and rock feed design details.

@entertainmentforyou6677 5 лет назад

Hahahahaha Mr. William's this is by far the Best Video Ever! Hahah Greatness!

@johnegan1623 10 лет назад

Love it thanks Jeff. How about some plans and specs for those of us wanting to do a build please? Also have you ever scaled one up for higher capacity?

@Askjeffwilliams 10 лет назад

John Egan we have a vid coming out with the specs for it and no we never did. Jeff

@robertaskme1338 11 лет назад

Nice and funny bit to keep folks watching Jeff ;) ;)

@californiadigger4170 11 лет назад

I like the way you explained the way crusher works and the do's and don'ts . I was looking forward to this one thanks GL HH ;-)

@mobiltec 11 лет назад

Can't wait to see how you run the material through a shaker table.

@Jheskin67 10 лет назад

Great video my friend. Entertaining and educational.

@edjrmorgan 7 лет назад

Jeff, all your videos are awesome, problem is I've watched just about all of them, I'm worried I'm going to run out, but that's ok I'll watch re-runs their so good! Keep up just the way your doing it, great job!

@Askjeffwilliams 7 лет назад

Thanks...we will and thanks for watching our work ...we have more on the way.

@SteveKasian 6 лет назад

I hear ya - I'm going in reverse chronological order, and I'm already at the 3 year mark. I guess that's about half or so?

@johnegan1623 9 лет назад

Hi again Jeff Thanks so much for posting this video. I followed your example and built one very similar. My first trip was very encouraging and I am looking forward to more. My next question is do you use a spiral wheel or a shaker table to clean your crushed ore? The crusher does a great job breaking down the ore but there is a lot of it to process. Just wonder what you advise please?

@Askjeffwilliams 9 лет назад

John Egan we have used a Gold cube but also like using a RP-4 shaker table. Jeff and Slim

@74KU 4 года назад

I see those end links wear (as expected) what about some kind of "flail end" mass to make the chains last a bit longer and maybe carry a bit more force in the strike?

@Adam_Outlaw 10 лет назад

Hey Doc see you've scaling-up your impacter from the baby mill you had before... NICE job too! If your anything like me you'll soon realize you also need a jaw crusher & ball mill or the processing gets bottlenecked something fierce. If you run that baby dry get yourself a cyclone dust separator system for your shop vacuum or expect to stop & clean filters every 3 to 5 mins. Using it wet can rot the metal/make issues with second grinds or sieving. Just what the doctor ordered though;)

@NormanMoody 9 лет назад

thank you very much is super informative and I have just subscribed

@Askjeffwilliams 9 лет назад

Norman Moody Thanks Norman for both the comments and the Sub. Jeff and Slim

@AnasaziAl 11 лет назад

Very well presented.

@Tunzbig 8 лет назад

Gordon Freeman is that you??? Love your work mate big love from AUS! YEEHAWW

@johnwells1724 4 года назад

Thanks Jeff, Love your videos.

@Askjeffwilliams 4 года назад

you betcha

@123kkambiz 10 лет назад

Also you can do few lines of hard welding about using special electrodes. but you have to heat the chamber while welding and do some heat treaatment. I think just heating by acytilene gas will suffice your requirement as it is not critical job. However thanks for your videos, very informative on every aspect .

@robsholtz431 10 лет назад

Hey Jeff- had to do a double take, didn't recognize you. Another great vid, enjoyed it Thanks

@bertgolden1616 11 лет назад

Very nice! What are you using for the mesh? And what keeps it from being damaged? Do you harden the case?

@sayfullardjaja3194 2 года назад

thanks Bro for your sharing knowledge 👍👍👍

@Askjeffwilliams 2 года назад

Always welcome

@123kkambiz 11 лет назад

nice idea and excellent explanation.Isuggest weld weld pieces of ir

@32Clinton32 10 лет назад

Jeff, there is something... buried.... done deep inside of ya... that just aint all there... Ha ha ha and that's what keeps me coming back for more.. Well, that and I do learn a lot from you! Always appreciate you, your knowledge and your good humor..

@Askjeffwilliams 10 лет назад

Thanks for the comments, I am glad you like our vids with all of it's crazy madness but the secret is....I like fun videos too. Jeff

@Dannnyboy1974 11 лет назад

Great vid

@philparrott4424 3 года назад

Going to build one for crushing glass. I have picked up hundred of pounds of glass on the beach in front of my house in the Philippines.

@YukonNate867 10 лет назад

Awsome video man, good stuff man, this thing is bad to the bone, going to build myself one right away, love to see it in action cant wait for the video, i am a prospector up in yukon territory have myself a promising claim, will keep you updated on the progress, havent gotten out much yet this summer it has been way to hot out! but this month boy i tell ya we are gonna go hard! heading out tomorrow to try out my highbanker set up should be a good time! untill next time take er easy Jeff. Nathan

@donnaf.chapman3050 7 лет назад

Could you provide a general list of building materials needed to build the rock crusher?

@timellison9015 8 лет назад

you crack me up m8 :) and loving the advice ,thumbs up!.

@Askjeffwilliams 8 лет назад

+Tim Ellison Than ks there Tim , always like to hear that, take care mate. Jeff and Slim

@timellison9015 8 лет назад

you to guy's :) thanx heaps for your video's learnt so much keep up the good work mate.

@Askjeffwilliams 8 лет назад

you betcha and our pleasure. Jeff and Slim

@ponkiebonk 5 лет назад

the good old days aye, still seen as very inventive man

@stanleystalvey6185 9 лет назад

hahaha.. Mannn, you are sooo Kra%Zy... Started my day laughing with a neck sprain. I love it.!

@entertainmentforyou6677 5 лет назад

Hahahahaha Mr. William's this is by Far the Best video Ever! Hahahah Greatness!

@Askjeffwilliams 5 лет назад

Thanks.

@aaronkeeth651 5 лет назад

would those add~a~link cause a vibration if they are not run through the plate directionally the same?

@troyfranson9897 9 лет назад

Jeff, do you have the plans for the impact mill. I would like to see what gauge and dimensions some of the steel is that you used.

@Askjeffwilliams 9 лет назад

***** Hi Troy , we will be making another vid on the exact dimensions of the mill as it is a frequent question. Jeff and Slim

@ericsbraun 9 лет назад

Hi Jeff, A question... When you said you would put the out-port for your crusher-pulverizer "on the side next time" did you mean higher up on the curve where rock would not accumulate -or- did you mean that the best design is on the perpendicular side, the side with the bearing mounts? Thanks.

@Askjeffwilliams 9 лет назад

***** exactly,.a side port would be better and the best place for the feeder tube is on the back like we have it. Jeff and Slim

@keithmills2385 10 лет назад

Dr. Jeff, I've been having problems urinating in my pants when i watch your videos. Anything that you could recommend for me?

@mikes3200 10 лет назад

Question is there a lid to keep the rocks from falling out while the rocks are being crushed.Or do the rocks crush at a low speed.You are a vary talented person.keep up the great videos.

@AmarFabrictor 5 лет назад

Thankx buddy i m going to make this type of machine

@footballfanclub1425 5 лет назад

When you make?

@AmarFabrictor 5 лет назад

@@footballfanclub1425 i already make it But its sounds so loud and its makes everything in powder but i dont powder

@drtcurt 9 лет назад

Thanks for the great video Jeff.. I decided to build one after watching your video. I just finished building a jaw crusher but I need something to get the material finer so I can run it threw my gold cube. What did you use for a screen? Did you build it or buy it & what size mesh? Thanks again..

@Askjeffwilliams 9 лет назад

drtcurt We used punch plate we bought at Curtis Steel. Size is 1/ 8 th holes .Jeff and Slim

@johnegan1623 9 лет назад

drtcurt Any chance I could see some pics of your jaw crusher and plans if possible please?

@48chris13 9 лет назад

G'day Jeff, I enjoy your style! Mate is there a preferred gap/chains to casing, both up down an sideways? or is it, give it some clearance and she'l work fine??

@Askjeffwilliams 9 лет назад

Chris Phillips Thanks Chris, always like hearing that. We set them at about 1/4 inch. Jeff and Slim

@AaronPoulsen 9 лет назад

Hi Jeff, can you do a video how to build a very easy sluice box?

@Askjeffwilliams 9 лет назад

Oh Schaf why yes we can and that is a very good idea and we will show us using it too. Jeff and Slim

@Lexdex1111 4 года назад

is it any video to see how this crusher works ---thank you in advice

@viviannedonnelly233 7 лет назад

Jeff, Your how to find gold videos are very good, I have seen many of them. You have a great talent for acting, are you perhaps going in that field? Jerry Donnelly

@leburnham5864 9 лет назад

Jeff, Good solid design. I think you are correct with the outlet being up the side further would beneficial. My friends just bought a "hobby" gold, lead & silver mine, so we are going to build a crusher similar to your design, except gas or diesel powered. However, our design will put an output hose into a bucket with water in it to reduce the dust particles. A bit more messy maybe, but silicosis can be fatal. Even with NIOSH approved safety equipment there is no reason to take chances. I have had 2 in my family die from dust inhalation. Paranoid? Yes,. indeed. The way you have the input tube designed is vastly superior to a couple of designs I have seen on RU-vid. I saw rocks come flying out of their crushers feed pipe on the videos. "Do not look into feed tube on rock crusher with remaining eye".

@EcotecSS 9 лет назад

Hey, you know what the workflow and the ¿?, particle size produced? thank you

@robs9574 10 лет назад

hey nice machine, how did you balance the shaft? Also what size gas motor would it take to run? My gen is to small for that but would love to have it on my claim. Thanks for the vids have learned some great stuff and will pass it on to my Grand kids.

@Askjeffwilliams 10 лет назад

Hi Rob we welded small counter weighs on until balanced and probably a 10 hp. Jeff

@thomasr.miller5553 8 лет назад

NICE...THANKS FOR THE TIP..

@Askjeffwilliams 8 лет назад

+Thomas R. Miller You betcha Thomas. Jeff and Slim

@mikego18753 11 лет назад

Jeff..enjoyed your vid. How do you adjust the chain length? ore is it not critical. Cheers.

@stematic5911 8 лет назад

what is the speed in rpm of the shafting after reducing the speed of motor by using pulleys? our motor is only 1740 rpm is ok or too slow or too fast?

@lastfanstanding999 10 лет назад

"here... we, shall go" !

@surplusdriller1 10 лет назад

hi love your vids. What is that flat ball bearing mount called? and what rpm do you use.? plees answer.

@jeremybecker341 9 лет назад

Hello Jeff I am a new subscriber to your channel. I like your energy and find your videos not only humorous but also educational. I have only been experimenting with the gold prospecting thing for about a year and a half now. I am in the process of trying to build my own trommel. After watching this video I want to run to harbor freight and grab a motor and hit the local metal yard and start welding away. Thank you very much for the idea. I hope you do not mind that I use it.

@Askjeffwilliams 9 лет назад

Jeremy Becker Thanks Jeremy for the Sub and for watching.Yes please use the ideas we have and expand on them if possible. Let us know what you build and how it works and then go get the Shiney. It is just sitting there say " Come and get me " Jeff and Slim

@nrcrdiggers3766 8 лет назад

We really enjoy your videos and have learned much from you doctor;). We were hoping to bump into you and slim out in the Az desert on our last trip. You must have been working hard on your GOLD! So how many cups of coffee would one of these bad boys set me back? I couldn't seem to find them on your website. I like that it is large and electric, great safety features! If you are still selling please let us know. Otherwise, keep the great videos coming! Hopefully, bump into you guys on our next adventure to the desert! If you ever make it to CO drop us a line have a couple claims and some private land with lots of the fine stuff! Heavy pans, NRCR DIGGERS

@Askjeffwilliams 8 лет назад

Thanks so much for the outstanding comments , me and Slim always like reading them after a long day of digging in the mines. We were going to make them to sell ( about 3k a peice )but when the cost came out it got real quite so we decided to make smaller pocket mills instead. JS

@MarkSeve 7 лет назад

OMG, you sure have changed Jeff. After watching so much of your current stuff (Oct/2016), it took me a few seconds before I recognized you.

@Askjeffwilliams 7 лет назад

I know ...right....hanging around Slim all the time and look what happens. JS

@MarkSeve 7 лет назад

Well, that would explain it. Hows it going? Where are you located? (state). I'm in Nevada, got my Garrett Gold Pan Kit on its way, should have it in a day or two. Thanks for the great videos.

@Askjeffwilliams 7 лет назад

we are in Nevada too and let us know how you like the kit. JS

@MarkSeve 7 лет назад

Will do. If your not to far away, maybe we could meet up sometime.

@pauldixon7680 3 месяца назад

Very cool 😎

@kimkimball4447 9 лет назад

Do you have a set of plans with material needed and where to get the materials. Can they be purchased.

@Askjeffwilliams 9 лет назад

Kim Kimball not yet but we are working on them. We use to sell them but was to expensive. Jeff and Slim

@robs9574 10 лет назад

Hi Jeff, did you ever make a follow up vid on the build? Did that work out better moving the output to the side? Season starts this month and will try to send you coffee. Thank you for taking the time to reply

@Askjeffwilliams 10 лет назад

Hi Rob not yet but we are working on it. We still have the discharge on the bottom so can't tell you if it ids better on the side yet. Jeff

@xboxgamer104 9 лет назад

bet it grinds a mean coffee grind

@shartne 11 лет назад

Wow looks like you got a little bit of work and money in that. I hope you run a lot of rocks through it and get your efforts back and more. Gold just keeps going up. Hey I was wondering do you ever find silver?

@maddogmaz1576 4 года назад

Love this song.

@alizaderic 10 лет назад

Quartz with gold in it takes many appearances. I found a rich lode with no visible gold that assays up to 3 oz./ton with 5/8 oz./ton being the low end. Generally, quartz with gold is dirty not snow white; brown, black, rose, grey are inviting colors on the rock. Also, sugar quartz is good, crumbly quartz is good. Have it assayed or learn to assay.

@ahmedelkhawaga5813 8 лет назад

Jeff, how long would it last in the field? eventually the inner wall will be hammered and decreased, so after how many tons I'll be in need to reconstruct?

@Askjeffwilliams 8 лет назад

+Ahmed El Khawaga not sure we have been using it for a while know with out and degradation. Jeff and Slim

@msmaggie57 6 лет назад

bloody good

@clyn3179 6 лет назад

Where can one purchase the flail chains for the impact crushers at a reasonable price?!

@robertrector2555 5 лет назад

I am building a brand new one as we speak, it's 20 inches around drum and 14 inches long, 4 inch feed sitting on 3 inch square tubing, I am about to make my shaft that holds the chain the problem I see or maybe it's not a problem looking at yours is it looks like it would be out of balance and wondering if I should quad the shaft then just having the 2 chain holders you have there, do you have problems with noise shake and vibrations other than normal chain noise ? Going to be doing the shaft tomorrow so any help would be appreciated tonight if possible from you or anyone who has built one

@scottjarvis6428 7 лет назад

Being a Pipefitter, i am a little bit upset you did not grind down that sharp edge from cutting the Pipe/Chamber. lol. I learned the hardway always wear gloves! Cool crusher I think I could build one!

@tank95ww 10 лет назад

Jeff are you getting a bigger budget for your videos? They keep getting more entertaining(intro) and educational. My cousin and I were talking about buying or building one our self, thanks Chris

@GregoryMalfory 2 дня назад

Jeff i am planning on putting the exit port on the side. But wouldn't that damage it more from rocks constantly hitting it trying to get out? Thank you.

@Askjeffwilliams День назад

no .....its better on the side