Rocket RC Motor Supersonic Sensored Brushless 17.5t and 120A brushless esc 1st look

Подписаться 7 тыс.

Просмотров 7 тыс.

50% 1

Welcome back to Wtf Rc Cars,
Rocket RC Motor Supersonic Sensored Brushless 17.5t Motor 120A brushless 1st look
£7.46 40% OFF|Program Card for Rocket Turbo TS160
www.aliexpress...
59.18￡ 40% OFF|Rocket-rc Motor Supersonic Sensored Brushless 540 Motor 120a Brushless Esc
www.aliexpress...
rdmodels.co.uk/
399 Sheffield Road,
Chesterfield
Derbyshire S41 8LS
01246 942777
info@rdmodels.co.uk
Opening Hours Mon-Fri 9.00-5.00 / Sat 10.00 - 4.00
CNHL batteries link
chinahobbyline...
US PRO Tools 4 Piece Japanese Industry Standard Screwdriver Set JIS ph1,2,3-1616 £10.35
amzn.to/3XI979Q

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@galkawarrior 3 месяца назад

Thank you for sharing! I almost bought a pair of these for my Clodbuster, but found out that the ESC can't reverse the rotation of the motor, which is required for one of the motors in the Clod. I'll be looking for an alternative then. 😊

@WTFRCCars 3 месяца назад

Yeh there for race rc's and all drive the same direction :)

@enricomiceli5517 Год назад

Tested myself today, the control is impeccable, since is sensored and of decent quality minimal foreward and backward are super controllable and very sensible and responsive after some remote setting, i definitively suggest to get the program card for some more adjustment but for the rest is absolutely ok. A little loudbut fast!

@WTFRCCars Год назад

Great to hear!

@christokolev6311 Год назад

Which program card is compatible

@WTFRCCars Год назад

The one in the video

@christokolev6311 Год назад

@@WTFRCCars ok, and do you think it's necessary, because I don't wanna spent 15$ if it's not

@WTFRCCars Год назад

It makes.life so much easier to set up the esc

@dejanzdravkovic9010 5 месяцев назад

Always nice to see your videos......❤

@WTFRCCars 5 месяцев назад

Glad ya like em :)

@acceler8n 3 месяца назад

Your videos have helped me a lot! Thank you.

@WTFRCCars 3 месяца назад

Glad ya like em :)

@leedyer1369 7 месяцев назад

Hi wondered if you can help .I have installed the motor n esc correctly but motor is turning the wrong way how can I correct this thanks

@WTFRCCars 7 месяцев назад

This is a race motor/esc so they all spin the same direction and can not be reversed as they are brushless and sensored, are you sure it's spinning the wrong way or do you just need to reverse the channel on you transmitter?

@exprymer Год назад

Hello! I have a newbie question but after the calibration process, which I assume it is just as you said ( can you confirm it for me?), Domwe need to calibrate it after every power-on?

@WTFRCCars Год назад

Hi no you only calibrate an ESC when you 1st bind a transmitter to an RC as you need to tell the esc how far the transmitter will travel in both forward/backwards and where the neutral point is :)

@joealbuquerque5557 Год назад

my hsp 94111 is not working, the motor turns to the wrong side even reversing the radio, I need to know if I can use a 3.5mm banana connector on this motor and esc, the seller does not answer my questions, help me thanks

@WTFRCCars Год назад

The wires are soldered directly to the esc and motor, and it's sensored so you can't just reverse the wires

@joealbuquerque5557 Год назад

soldei certo , defeito no motor

@enricomiceli5517 Год назад

I just got this brushless combo, 3625 kv motor plus 60A esc. How is it? I couldn't find any rocket rc V2 review online in witch the product looked like the one i ordered from package and detail except yours. Are the dafault setting decent? What do u think?

@WTFRCCars Год назад

Well this one works well for what it's designed to do haven't had any issues so far, as for the settings really depends on how you want it to work

@enricomiceli5517 Год назад

@@WTFRCCars i have a tt01e and i use it for carpet racing , i hope the base punch is decently set and i need something that will give a good powerful acceleration and gradual and precise deceleration in corners. Does it have some delays (u press the gas and it takes a few second for the car to move) or some cogging (virtual impossible with the sensored motor)?

@WTFRCCars Год назад

No cog as you say it's sensored and I run it in a carbon touring car so if it's good enough for that you should have no issues in anything else there basically a bl120

@stokedGSXR Год назад

Does it have a blinky mode? If not, the hobbywing justock is still a better option at a similar price point... Especially for racers

@WTFRCCars Год назад

So the just stock is just that it's a stock esc and not able to change the timing and other setting also cost around the same price as this whole ESC and motor set up so it's not really a good companion as both are very different use cases :) this is a cracking set up if you need like I do a 17.5t motor but you can adjust the timing and other setting and it allows this at a much lower price, now is the a replacement for an xr10 pro elite no definitely not but it's a good option for a whole lot less if you don't need the features or amps of the xr10 pro :)

@stokedGSXR Год назад

@@WTFRCCars agreed! However having a blinky option would allow it to do Sortof "double duty" and allow both blinky and mod users use it. Just my opinion,

@WTFRCCars Год назад

Yeh definitely agree with what ya saying and I'll have a look into it and see if it has the mode cos I know many tracks that have the class :)

@WTFRCCars Год назад

So i have had chance to set it up in an RC and yes it does have blinky mode when boost and turbo are off :)

@stokedGSXR Год назад

@@WTFRCCars thank you for doing this! Going to grab a set of these for a few builds for friends that are on a budget,

@joealbuquerque5557 Год назад

Tem um vídeo calibrando ele de verdade na prática? Estou com dificuldade, o meu o motor gira para o lado errado , não consigo acertar , nem no reverso do rádio da certo

@WTFRCCars Год назад

You have to use the program card to reverse motor direction but some brushless sensors esc's can't reverse

@joealbuquerque5557 Год назад

I am not able to revert on the radio or on the programming card

@WTFRCCars Год назад

@joealbuquerque5557 It may be same as the hobbywing 10bl120 where they only work in one direction as all the race rc's seem to only need one way

@joealbuquerque5557 Год назад

Oi é bom esse combo ? Você recomenda para um snrc r3g 1/10 ?

@WTFRCCars Год назад

Yeh would work well in that RC :)

@exprymer Год назад

Mate, i'm currently facing the following: I connect the battery, turn on the ESC ( a red light beeps with the pressing) but no beeping ever occurs. When i keep the button pressed it turns into a Blue light (for the calibration procedure) but again no beep at all neither any light.. When i plug the programming card it starts showing zeros and nothing happens.. What could it be?

@WTFRCCars Год назад

Sounds like a fault esc

@louisabelhard9596 4 месяца назад

Hi i have the same problem have you found the solution?

@WTFRCCars 4 месяца назад

It's a hard one to find what the issue is as I can't make mine do it mine just works fine all the time :(

@louisabelhard9596 4 месяца назад

@@WTFRCCars i did a mistake when i was calibraring i did read the manual so i long pressed and it beeped while the car act like elevtrocuted

@louisabelhard9596 4 месяца назад

@@WTFRCCars hey so i got it recalibrated by some1 and its working pretty good but for some reason the esc is still blinking blue even after i recalibrate it do you think this is normal? And also can you make a video of the esc after the calibration does it still blink and maybe can you give me a video of it already calibrated and running does it stays blinking blue like mine? 😁😅 thank you