No video :(

RockShox recon basic maintenance

Подписаться 2,9 тыс.

Просмотров 1 млн

50% 1

#1 As I said in few comments down below, this "tutorial" was only made to show everyone how is recon made inside. By showing step by step how to dissasamble and asamble everything, my clip MAY HELP someone in NONprofessional repair. Check rockshox tech manual pdf's before repair to confirm ambiguities.
#2 Brunox Deo is recommended by ROCK-SHOX. It keeps the sealing rings in soft condition and does not adhesive dust. AND ITS NOT AGRESSIVE TO THE SURFACE.
In this movie:
- partly disassembling (solo air spring, motion control cadrige, oil seal)
- changing some o-ring's
- changing oil (fluid)
Serwis, rozbiórka krok po kroku, amortyzatora typu SoloAir od RockShox USA. W tym filmie:
- rozmontowywanie amortyzatora (w tym sprężyny powietrznej, tłumika motion control oraz uszczelek, gabek olejowych)
- wymiana simeringów
- wymiana oleju

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 133

@StarfieldBound 9 лет назад

Watching someone do something like this is sometimes more effective than listening to someone talk about it. Thanks for posting the video.

@danwarren2355 10 лет назад

Helpful tutorial, good real world DIY demo. We're not all geared up with park stands and the perfect tool kit to do every job, but you show it CAN be done. Good work there..

@motoyz426 6 лет назад

Nice job! Moves fast. This is the best video I have found .

@Slipperyboys_drift 8 лет назад

Hacked at those those wiper seals and then decided to keep them in. Strong effort but didn't go the distance to make it worth pulling the whole shock apart.

@MarcoCaron 8 лет назад

Wow, doing most of the tricky stuff off camera, that was helpful.

@gregor_b1 8 лет назад

Thats my secret, cheers!

@MarcoCaron 8 лет назад

Thanks hehe !

@gregor_b1 7 лет назад

ok, I've done it. There's a new version of rebuild process. Feel free to like, share and comment mate. Thanks!

@ianmangham4570 Год назад

These are old but they sure are lightweight and perfect for the trail /pot holes of England 🙏🇬🇧

@gregor_b1 11 лет назад

To zależy w głownej mierze od Ciebie. Jeżeli robisz dużo kilometrów w dobrych warunkach pogodowych na asfalcie, to będziesz musiał wykonywać te procedury rzadziej niż gdy jezdzisz w błocie po leśnych scieżkach. Zgodnie z zaleceniami producenta czyszczenie goleni i wymianę oleju w dolnych goleniach powinno się wykonywać po 50godzinach jazdy w średnich warunkach. To wideo zrobiłem tylko po to by pokazć jak RS jes w środku zbudowany, oraz by ułatwić serwis w domowych warunakch, co jest mozliwe ;)

@rcfriscoflyer 5 лет назад

Great Job! I am tearing mine down next week.

@gregor_b1 11 лет назад

Natomiast wymianę uszczelek, oleju w tłumiku i drobne naprawy zalecane są co sezon jazdy. Z własnego doświadczenia wiem, że dbajac o widelec można ten czas wydłużyć do 2 sezonów, lub 3 z wymianą oleju w tłumiku motion control. Polecam srodek brunox do czayszczenia i smarowania amortyzatora. To zdecydowanie wydłuży żywotność aluminiowych i gumowych części amortyzatora.

@iamazouk5609 10 лет назад

Really great and helpful video. Doskonała robota, Pozdrawiam ;)

@granth68 10 лет назад

Shame the camera doesn't film much of the action.

@ghodgez 10 лет назад

Excellent video.

@markoposavec1140 9 лет назад

Thx for posting the video!!

@felipemock6696 10 лет назад

That Service can be in the rock shox boxxer world cup 2014

@gregor_b1 10 лет назад

honestly, I doubt it

@javimolina9857 10 лет назад

Excellent tutorial, thanks for sharing, just a couple of obvervations: As far as I can tell, you are servicing a Recon fork, shouldn't you be using different oil for the upper damper leg as the one used for the other parts of the fork? btw are you using paper towels? isn't that less aggressive with the surface to use a cloth towel?

@chrisdavies6380 9 лет назад

Would have been more use if the part you were working on was in shot all of the time *rolleyes*

@gregor_b1 10 лет назад

I'm so sorry. It's my second clip for now, and I'm still learning how to prepare them well for viewers. Thanks for your feedback, next time (with using a real camera stuff) I'll record/edit it better. Apart from this issue, let me know if you'll need some help or if you'll find here some incoherent things. cheers

@P00pshute 10 лет назад

This video tutorial captures the brunt of what's needed to rebuild a shock like this but a few important things are missing/problematic. First, Sram (and virtually every other shock company) recommends NOT using degreasers and solvents to clean any part of the fork. Reason is, harsh chemicals can impact the o-rings and finishes on the stanchions. Only isopropyl alcohol should be used to clean the parts. There are also a few o-rings that are missed in this video such as the internal o-rings on the air-solo assembly (two internal o-rings on the two white caps). Those two o-rings should be replaced and GREASED, not oiled. I recommend watching the official Sram videos here on youtube as they're done by a certified tech and walk you through each step.

@fidshaharuddin8587 6 лет назад

The fork is very cool

@IoannisCherouvim 10 лет назад

If you are going to be reusing those o-rings then I think that you should be removing them with finger pressure and not with a screwdriver. Also, washing the outside of the lowers with foam and such should be done before taking the lowers apart.

@steve4321able 7 лет назад

Forget this, I'll buy new forks.

@gregor_b1 9 лет назад

@ann collins motion control (if there is one) probably looks the same, but spring is totally different. Sorry.

@SuperDeluxe80 9 лет назад

a big nylon pipe cleaner works wonders.

@chefmaroto 10 лет назад

good tutorial, but many of the video does not look like ocsines follow the steps.

@savoirfaire8979 3 года назад

16:50 - *I noticed that the service manual doesn’t specify which side to insert the stupid black rubber disc. You inserted on the rider’s right (non-brake) side, so hopefully that’s correct.*

@anncollins7904 9 лет назад

Are recon U-turn forks serviced the same way?

@franekdub550 3 года назад

Mam pytanie. Jest sens zalewać go 15w i 5w? Czy lepiej tylko 5? (Jak tak to gdzie trzeba go zalac

@fredrickoduor2698 8 лет назад

how can i get the rock seals?

@TheN3ckol 9 лет назад

Witam, czy moglbym prosic o oleje i smary oraz srodek czystosci to czyszczenia dolnych lagow w srodku?? :) prosze o nazwy.

@gregor_b1 9 лет назад

Cześć TheN3ckol. To będą Smar RST PRAMAX Power (7zł), Olej 15W Finishline (można poszukać odpowiednika do motocykli za mniejsze pieniądze), Zmywacz do hamulców jako odtłuszczacz, a do konserwacji Brunox Deo. Zobacz moj kolejny film.

@TheN3ckol 9 лет назад

Grzegorz Dziękuję pięknie :)

@bartoszmeina984 9 лет назад

Grzegorz

@robertclare4480 9 лет назад

Great music track ! tasty drummer

@wadjioslo3910 5 лет назад

I need tutorial rare shock with pneumatic

@zackzena1974 8 лет назад

bello, ma se l'inquadratura fosse stata leggermente piu bassa...

@pkmobius 8 лет назад

Best video Thanks :-)

@RyanL710 10 лет назад

I saw that you filled up another syringe of oil at the end of the video, then it just kinda disappeared. Was that just for the lowers?

@HigherBetter 5 лет назад

Too bad that most of the time we don’t really see what you’re doing ... you should either adjust the camera angle or work right under it

@Renedk77 10 лет назад

camera angel is a little off. Too bad, that you cant see all the work you are doing.

@7reyes298 9 лет назад

I like the music,what is it ?

@nukchuu1 9 лет назад

+Alejandro Godoy the song at the begining is The Wallflowers - 6th Avenue Heartache

@MAIERJulian 8 лет назад

+Alejandro Godoy sounds like an instrumental version of 6th Avenue Heartache by The Wallflowers! Great song!

@Agatzui 11 лет назад

Uklad regulacji odbicia jest podobno na uszczelce i trzeba go mocno wypchnac, bo nie moge rozdzielic gornej czesci od dolnej. A moje pytanie brzmi od ktorej strony to zrobic?

@hcadena3874 10 лет назад

Any chance you can put a link to download a PDF showing step by step ?

@neon128 9 лет назад

Hello. I have only 5wt oil, can use that on everything or I need 15 wt for the lowers ?

@pranilshakya9057 8 лет назад

which oil is that and how much of oil we should put oil accurate

@rocco3640 9 лет назад

manutenção Garfo Lefty 29 gostaria de saber!!! abraços

@gilat6 8 лет назад

Hi, i have a RockShox Tora RS 318 with 140mm travel, how much oil (into the damper/motion control side) does it need ?

@gregor_b1 8 лет назад

motion control in tora? for 2011 tora, dumper side: 150 in upper legs 5w, 15ml into lower legs 15w; spring side if u have soloair one 3ml into upper legs (15w) and 15 into lower (same wt) but if u have your tora with coil u only need to fil lower legs with 30ml of 15w oil.

@gilat6 8 лет назад

Thanks ;)

@Ms-xj5lt Год назад

Cześc ile oleju sie wleja i jaki ? Muj Amor recon SL byl zamontowany w KTM race comp rocznik 2003 taki Sam Jak ten tylko muj ma wejscie na V hamulce pozdrawiam

@adrianITF 9 лет назад

Jaki to rocznik tego Recona? Potrzebuje uszczelki nabyć...

@jmarvin165 7 лет назад

Nice rusty tools

@aziscb1514 5 лет назад

Ur problem on ur camera position 😞

@user-kd2cj8ni1i 10 лет назад

у меня нет болтов снизу на вилке.Что мне делать?!

@supermario1210 7 лет назад

Interessantes Video, leider läuft ein Drittel der Reparatur unsichtbar ab, Kamera steht ungünstig.

@gregor_b1 7 лет назад

check out my updated version of this clip

@ket6125 5 лет назад

Could I please know why you hit the bolt before removing hit

@danc2014 4 года назад

The fork is bolted down for years. Lossening it then hitting it will free up the seal attached allowing you to remove it easier.

@hixyhicks 3 года назад

I have a set of tora 302 would the service be the same .Cheers .

@fatboy9884 4 года назад

How much oil goes into the air damper side of the fork? One full syringe?

@ianmangham4570 Год назад

6ml

@daliusskruodys1615 10 лет назад

it just like for rockshox tora or no?

@audiaudi212 8 лет назад

how much oil do you use for the mute page ??

@MrGivmedew 10 лет назад

For anyone watching this as a how too... DO NOT remove seals unless you plan on replacing them. Stretching them is going to make them last longer and since they are bathed in oil all the time they do not need to be cleaned. The tiny but if old oil will go away after being used for a while with new oil. This entire year down and build up was pointless. Draining the oil and refilling it would have done the same thing.

@Vlad86ro 9 лет назад

How much oil you put in the damper,. i saw 7 seringe, but wath quantity?

@gregor_b1 9 лет назад

Vlad Cosma 123ml into MotionControl upper tube and 6ml into lower tube; 3ml into Soloair upper tube and 6ml into lower tube on the same side.

@dha588 8 лет назад

How much fluid did you use?

@macoy1519 8 лет назад

hi, what kind of oil did you use? tnx

@randycraig20 7 лет назад

How much $ would a bike shop charge for this repair. And how much $ for a new set.

@gregor_b1 7 лет назад

Randy Craig forgot how to use google? Seals costs around $25

@JenniferWoellert 9 лет назад

any idea as to why a Reba Team fork would stop going up and down and then pop the seal and start leaking oil? I could pull it up but then it would just plunk back down. This is with air and without... I've taken it to two shops and nobody will help. This is also after riding the bike twice.

@gregor_b1 9 лет назад

It sounds like something is leaking into lower legs. If I were you, I would start with replacing all rubber orings in both chambers. Is it equiped with oil damper (like motion control)?

@JenniferWoellert 9 лет назад

+Grzegorz my husband had taken it to a bike shop and they said they wouldn't help and to come get the bike. I don't know if they tinkered with it. I just went out and pushed down on the handle bars and it is going up and down now but it's hard to do. It was set for my husband who has 40lbs on me. The bike is too tall for me to et any leverage on but when I lock out the shocks it still is moving...

@JenniferWoellert 9 лет назад

+Grzegorz I didn't see anymore oil leaking out. The shop must've done something..

@ianmangham4570 Год назад

@@JenniferWoellert Just let a little air out

@7reyes298 9 лет назад

Hi mate could you please tell me the name of the music thanks I really like it.the video is good

@gregor_b1 9 лет назад

sup dude. It's "the odyssey" by harvey79

@nukchuu1 9 лет назад

+Alejandro Godoy The Wallflowers - 6th Avenue Heartache is the song at the start

@Lonely_Shepherd 3 года назад

he doesn't have a rubber hammer and gloves

@ComandanteJ 9 лет назад

Fuck, dude, that fork is CLEAN, i had to sink mine into the bathtub with dish soap just to start cleaning it LOL. Would it be very different if the fork was spring loaded?

@S.iuli23 4 года назад

what year are this model ?

@TheVladimirgm 8 лет назад

Can you tell me how much oil should be in the left leg? (where the air pump) Thanks...

@gregor_b1 8 лет назад

+Vladimir K. 3ml into Soloair upper tube and 6ml into lower tube on the same side.

@TheVladimirgm 8 лет назад

+Grzegorz Can you tell me in the right leg as much oil? It should be the same as the left side. 6ml

@gregor_b1 8 лет назад

+Vladimir K. it depends on what fork you own. For recon as shown on a clip you need to add 123ml into MotionControl upper tube and 6ml into lower tube. Check rockshox tech manuals (sram website) for more info.

@TheVladimirgm 8 лет назад

+Grzegorz |Thanks very much...

@patrickmichelelisabeth2746 4 года назад

Vous ne montrez pas, au début, tous les produits que vous utilisez pour l'entretien

9 лет назад

so faltou diser o que tava usando para limpar 0_0

@patrickmichelelisabeth2746 4 года назад

You said the video is for non professionnal people doing maintenance. You do not show all liquids you use to clean or grease the fork at the beginning (repair tools, cleaning & greasing products, ....). The camera is not well setup to see all the steps you are doing during the process (manytimes, the camera is out of the view)

@scott1506 9 лет назад

what does the preload on top of the left fork mean?

@maxdamagebrate 8 лет назад

+s m This fork setting exists so that the fork can be customized to your weight (major reason) and riding style (minor reason). It's simply the initial compression of the internal spring in the fork. The more it's compressed, the stiffer the fork will feel.Bigger preload compresses the spring more, and so it's best for heavier riders and/or people who need/prefer the stiffer ride (racers etc.) Lighter riders should use less(-) preload. Less(-) preload will also give you plusher ride, but the bike will e.g. dive more during braking. Hope i helped you! cheerz

@ianmangham4570 Год назад

@@maxdamagebrate Truth ,I love my Rockshox and its so smoothies, I'm tall and wide so it gets used but never bottoms out ,I got like 150 pounds of air in the beast

@kevinfinke1 10 лет назад

i just take it to the bike shop...

@Lukerr239 10 лет назад

Well, then there's us who have the brains to learn it for ourself. You sure don't look like one of "us".

@Androctonus 10 лет назад

After seeing this video, I will, too

@spaghappy 9 лет назад

***** whats bot proper about it?

@mohdtajudintajudin297 7 лет назад

Kevin Finke Michelle

@itsalwaysfake 10 лет назад

Und federt die jetzt anders als wo der Orgie? Das ist doch sinnlos oder?

@patrickmichelelisabeth2746 4 года назад

Vous faites une vidéo ou l'on ne voit rien. En faite, pour vous vous-même.

@Road38910 8 лет назад

Great views of the table top.........very informative...........not..............!

@rodneyemmerich8828 3 года назад

About 30% of the time you work outside the line of the camera

@MrAntitou 8 лет назад

Il faudrait refaire la vidéo en filmant la scène et pas la table...

@gregor_b1 8 лет назад

+Pierre Scott écrire en anglais. J'enregistre quelque chose de mieux, alors vous allez discuter.

@D1G1T4LL1QU1D 10 лет назад

wear some gloves man, that shock oil is not good for you.

@rsobies 9 лет назад

szkoda że tak fatalnie kamera umieszczona. połowy czynności nie widać

@gregor_b1 9 лет назад

rsobies widac wszystko na nowych filmikach ;)

@kacperkuropka8476 7 лет назад

czym ty to psikałeś koło 5 minuty?

@gregor_b1 7 лет назад

pianka do czyszczenia, tylko to mialem pod reką. Użyj wody z płynem do mycia naczyń. Mozesz to przelac do butelki bo płynie do mycia szyb, bedzie latwiej psikac

@kacperkuropka8476 7 лет назад

Grzegorz dzięki :)