Тёмный
No video :(

ROCO 62193 BR 10 DYNIMIC SMOKE SERVICE GUIDE 

Hovermotion
Подписаться 11 тыс.
Просмотров 2,5 тыс.
50% 1

I have used water based smoke in the past but I do not recommemed using water based smoke as it caused alloy break down over time.
This is a vid of the loco when I first got it with the sound at default volume.
• roco 62193 DYNAMIC SM...
A WORLD'S FIRST: Dynamic steam emission by Roco! Digitally controlled steam emission! Seemingly realistically long lasting smoke clouds. For the first time steam emerges from the cylinders!
Model: The Roco 62193 German Express Locomotive Class 10 is a very large and impressive model. It offers a great level of detail and incredible running performance. Model has all wheel drive, both the locomotive and tender wheels and powered. Roco equipped this model with a syncronized smoke and sound system. Model blows smoke from the smoke stack and cylinders, the smoke is syncronized to the sound and speed. Besides the smoke and sound Roco installed lighting effects such as the illumination of the driving mechanism and driver's cab and a white/red light change can be activated separately on both sides of the locomotive via a PluX interface. Roco also did an exceptional job on the paint livery and delicate pin stripping. The BR10 is one of the most iconic German steam locomotives and no European Model Train collection is complete with out this impressive model.
Model Features:
5 Pole Can Motor with Flywheel
Metal Chassis
LED Directional lighting
PluX22 DCC recepticle
factory installed sound decoder
factory installed smoke units
NEM 362 Coupler Pocket
Era III 1956 - 1957
Prototype: The two locomotives of the 10 class were the last express steam locomotives designed and built for the Federal German Railroad. With their powerful three cylinder power plant, they reached a top-speed of 140km/h (85mi/h), and delivered even more traction than the 01.10’s. Albeit, they came too late, since as elsewhere, diesels had won the day. In Germany, it was the V200 (also available from Roco), which doomed steam. Providing the same power as a 10 class, the diesel was more reliable and cleaner. Almost all Era III express cars will look good behind these locomotives, but the modeler should use mostly the modern 26.4m cars when modeling any era except the late 1950’s since these locomotives were the most powerful steam locomotives available. Therefore, they appeared on the most important trains during the high point of their career.

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@ronthomas1196
@ronthomas1196 Месяц назад
you are a brave man working on such a fine model. Thank you very much for a fully comprehensive strip-down / rebuild
@hovermotion
@hovermotion Месяц назад
@@ronthomas1196 Thanks Ron, this was trial and error as not much information is given by Roco to take the boiler apart.. 👍🏻
@dragon-junction-MK2
@dragon-junction-MK2 Год назад
Wow Jim.. Your now fully paid up model engineer. Absolutely awesome job done ..Top Man Jim. Your going to blow Anthony`s mind on this one. Lol I very surprized at the loco drive system only two axles drive .But it works great. One superb Model Jim .. Thank you for taking the time to film it. Regards Lord Al.
@hovermotion
@hovermotion Год назад
Hi Lord Al, Yeah it's an amazing model, had it just over 10 years now. Roco did make one other version the Br95. 71098 Thanks for watching 👍🏻 🚂🚃🚃🚃🚃🚃🚃🚃🚃jim
@PompeyGamesRoom
@PompeyGamesRoom Год назад
Great job mate, awesome video as always 🙂
@hovermotion
@hovermotion Год назад
Thanks Sean👍🏻🚂🚃🚃🚃
@eddyvanvijfeijken6365
@eddyvanvijfeijken6365 Год назад
Great video Jim , you make it look so " easy " but a job well done , and interesting to watch !
@hovermotion
@hovermotion Год назад
Hi Eddy thanks for watching.. It's an easy model to work on once you know how to strip it down... 🚂🚃🚃🚃🚃🚃🚃🚃jim
@hotdogpilot6319
@hotdogpilot6319 Год назад
Yes, the suethe smoke oil is much better and not as smelly as it used to be. I invested in a syringe not only to get the fluid where I wanted it but also to get 5ml accurate for the ESU unit. When I took one of our MTH models apart to fix the unit, I was crapping myself royally! Good work Jim.
@hovermotion
@hovermotion Год назад
Thanks , Yeah I am somes lazy when it comes to injecting the correct amount..I must do it properly now.. I did get a syringe and oil with the model 10 years ago fron Arcida models...man I cannot believe I've had this model that long...bonkers... Which Esu loco do you have? Many thanks for watching again. 🚂🚃🚃🚃🚃🚃🚃🚃🚃🚃jim
@hotdogpilot6319
@hotdogpilot6319 Год назад
@@hovermotion The ESU unit I have is a spare part for the V60. I massaged it into a West Country class.
@hovermotion
@hovermotion Год назад
@@hotdogpilot6319 Wow nice retro conversation 👍🏻
@alanoes1
@alanoes1 Год назад
Great job Jim 👍
@bohemianh
@bohemianh Год назад
excellent video
@modelrailwayfantasia
@modelrailwayfantasia Год назад
Wow Jim How's things? Top job on fixing and cleaning.. You have patience of a Saint lol. That's a very nice steam loco very shick indeed. Take care Cheers Mark
@hovermotion
@hovermotion Год назад
Hi all good thanks , I hope you're doing good. It was scary on the first strip down as it has so much packed in.. Thanks for watching... 🚂🚃🚃🚃🚃🚃🚃jim
@ModelTrainOutsider
@ModelTrainOutsider Год назад
Hiya again, Jim! A great walkthrough on what you did and needed to do on this loco to get it back to running and smoking properly. Stuff like this scares the crap out of me, but I am going to have to learn. I also have a fair amount of laziness, too- just motivating myself to sit down and do it. Thanks for another amazing and educational video! As always, all the best to you and that wonderful family.
@hovermotion
@hovermotion Год назад
Hi Anthony, Thanks, I thought I would do a vid on this model as there are no strip down vids on RU-vid. It was scary at first with models in the past especially without instructions explaining... I think one of the hardest ones was the Roco digital steel coal wagon set. Thanks Anthony... 🚂🚃🚃🚃🚃🚃🚃🚃🚃
@1maico1
@1maico1 Год назад
Trix BR233 22402 and the new Hornby black 5 use cold steam which uses distilled water in a Piezo atomizer unit to avoid the mess of oil!
@hovermotion
@hovermotion Год назад
Hi , yeah there's new tech now Like the Trix Marklin Tiger maintenance Ludmilla loco that uses a similar process with water.. 👍🏻🚂🚃🚃🚃🚃🚃🚃jim🚃🚃
@FarlandHowe
@FarlandHowe Год назад
It looks very heavy and well engineered. You never seem to break things like I do when I am trying to get things open, particularly when there are no instructions.
@hovermotion
@hovermotion Год назад
Thanks Rob , it's a great model to work on as it breaks down and rebuilds very nicely.. Just have to take my time on stuff like this and do the work in sections at a time.. 🚂🚃🚃🚃🚃🚃🚃jim
@mariano5417
@mariano5417 5 дней назад
Hi. How can I activate the smoke system in DCC?. I bought a used one that is clean but the smoke fan does not work, everything in clean inside the smoke unit.
@H0bby_Adventure
@H0bby_Adventure Год назад
As usual, great job on maintaining your fleet. Not sure if you heard the motor on your drive by at the end of your video but the motor for the smoke chuff sounds a bit rough! May it might be a good idea to have a spare motor on hand for when that motor decides to give up. Great video.
@hovermotion
@hovermotion Год назад
Hi Thanks, unfortunately that sound is normal on this model, the decoder sound was turned down so the motor fan sounds louder. I was looking at getting a quiter sounding motor for the fan at some point if available. Thanks for watching jim. 🚂🚃🚃🚃🚃🚃🚃🚃🚃
@22763344
@22763344 Год назад
Señores, evidentemente la aleación Zinc-Aluminio que usa Roco para los castings en general y que no pinta como esa parte principal de metal que tuvo usted que limpiar, el fluído fumígeno que lo impregna como que a la larga no le hace nada bien porque lo carcome. Yo para darle larga vida a la pieza lo lijaría bien, se desengrasa, se le rocía una capa de premier y luego un acabado de espray color negro, e incluso pintura al envase del motor. Además de la pequeña pieza que fija el tubo del fumígeno que a la legua se ve es un Seuthe. Saludos.
@hovermotion
@hovermotion Год назад
Many thanks, Good advice. One of the problems was using water based fluid for a few years in the past and that did not help. Thanks 🚂🚃🚃🚃🚃🚃🚃🚃🚃jim.
@howarth004
@howarth004 Год назад
I found that both the smoke systems i bought only lasted a short time ...
@hovermotion
@hovermotion Год назад
Yeah Dave same as on the slot in gens they are very tempermental. The slot in gens need to be controlled with the decoder so it's never burns out ..
@alanoes1
@alanoes1 Год назад
Hi Jim, Noticed yours has a different model number to mine (70191) , are there differences in the actual models Alan
@hovermotion
@hovermotion Год назад
Hi Alan , there are slight differences as there are three versions of this model.
@padhyemihir
@padhyemihir Год назад
Nice video Jim. Does the smoke also come beneath the pistons near front pilot truck??
@hovermotion
@hovermotion Год назад
Hi MIhir ,Yes it does..
@padhyemihir
@padhyemihir Год назад
@@hovermotion how is it connected to the main smoke unit?
@hovermotion
@hovermotion Год назад
@@padhyemihir I did see small holes on the last lower running gear strip down I did , I did not do a vid on that last time , I wish I had now..
@ericblondeel4078
@ericblondeel4078 Год назад
very interesting report will you replace the decoder with an ESU , V5 ? to adjust the CV more easily
@hovermotion
@hovermotion Год назад
Hi Eric, interesting question, Not sure but it would be nice to try or get a Zimo programmer. It runs very nice and certain cv's can be adjusted to improve ultra slow crawing speed.. Thanks for watching . 🚂🚃🚃🚃🚃🚃🚃🚃🚃jim
Далее
Roco BR 58 digitalisieren ESU Decoder und LEDs einbauen
1:03:03
Schnellzugdampflok 10 001
6:33
Просмотров 17 тыс.
Simple Flower Syrup @SpicyMoustache
00:32
Просмотров 2 млн
Roco S160 steam loco review
20:44
Просмотров 21 тыс.
Dampflokomotive BR 95 - Die Bergkönigin
3:14
Просмотров 33 тыс.