Is it possible to customize the temperature display mode? To include something of your own alongside the temperature, move the temperature to the left or right, and so on?
@@Xplode000 On asus website Ryujin II uses Astek gen7 pump and the Ryujin III uses Gen8, where do you get your confidende from? The radiators are also different.
@@Xplode000 Have both, replaced the Ryujin II 360 (Noctua version) for the Ryujin III 360 (Noctua version too) and I can confirm that this one outperform the second gen.
do you think the non RGB noctua version is better than these strix fans? im sure its quieter but not sure about performance. I think they have been using the same noctua fans since Ryujin 1/2
No matter which model you buy, purchase the more affordable variant and install 3x Noctua NF-A12 fans. They are quiet and offer excellent performance. This way, you'll have quieter but also cooler results in the end.
Hello! The problem is this. The cooling system (ROG Ryujin III ARGB) has only one connector from three fans to connect to the motherboard (ASUS ROG MAXIMUS Z790 DARK HERO). The load of one fan is 0.35A. This results in a total load of 1.05A. According to the motherboard specification, the load for the CPU_FAN connector is 1A. Question: is it possible to connect the power connector for the fans of this cooling directly to the connector on the motherboard?
@@JegsTV Thank you. But will the connector or the motherboard itself be damaged if the load current at the moment the fans are turned on will initially be more than 1.05A (for a short time) or does practice show that a 1A connector can support this load? It’s just that when assembling you have a motherboard from Gygabite, I looked at the passport for it, the connector there is designed for 2A and there will definitely not be any problems.
Al instalar éste producto, funciona todo, pero los led de los ventiladores no encienden. A qué se debe? Mi placa es asus crosshair x670e Hero Mi fuente es corsair de 1000 w
I bought one of these, but I'm disappointed with the screen quality. When placing the gifs, the quality is automatically reduced by the software, that is, I did not see any change in quality as promised. There don't seem to be any changes from Ryujin II, has anyone else noticed this?
Havent had the ryujin ii. But from what i read the pixel count of the screens between the two are night and day. Maybe the gif you used had low resolution to begin with?
@@JegsTV No Bro. Even putting gifs with high resolution, when loading in the Armory program it automatically lowers the quality of the gifs. I've tried it in several ways.
Great video , I have a few disabilities so I find it hard to understand things. Can you list the descriptions of each plug and where it be plugged in on the motherboard please. Thanks
Awesome video! I just installed mine and realised that my GPU temperature displayed on the cooler is different from HWINFO. Any thoughts why? I am using an X670E Master from Gigabyte, paired with a Ryujin iii. Cheers!
Hey Jegs awesome video. Very well detailed. Was hoping you could chime in. I have Same AIO and I want to add Lian Li SL Infinity fans, do I still connect the 4Pin header from Asus AIO to the mobo? Thanks in advance :)
Hello Chris, Can you tell me how long is the usb cable from the screen ? I’m currently planning on buying the same model just the 240 version with no rgb and I want to make sure everything works. Thank you
I hope you notice my comment. Im planning to use Lian li Sl120 fans in radiator fan and connect it all to lian li hub. Is it okay if the cpu fan is just connected to mobo? While the rest of lian li fans connect to hub and going to mobo aswell?
no no no put the pump cable into the on board AIO_PUMP header if the board supports this, you will kill ur pump sooner or later if you dont the AIO_PUMP is designed to keep the pump on while the system is in sleep mode
That header is NOT for aio pumps. Read your manual. Every aio manual I've ever seen says to plug into cpu fan header and NOT pump header. My x570 dark hero mobo manual even says not to use the pump header for aios and to only use for custom loop.
I hope someone answers my question which cpu cooler is suitable for ryzen 9 7900x3d should i choose nzxt kraken elite 360, rog ryujin iii 360 or another product? by using an arctic p12 max fan. My old CPU cooler is Deepcool LT720 and it gets a little hot when I use it for video editing and when using overclocking on the Asrock Taichi motherboard. Thank you
Ive been using it with my 14900k it likes to hover 70-75c while gaming rarely it will spike to 80c on a single core but will come back down in line with the others idle is around 40c
Can i change the fans with lian li uni fan sl infinity? And if i can i will have problem with the fans? And where i must plug it and how can i control them plz reply
Maingay din minsan. But others have it worst. Check mo comment section dito or dun sa shorts video ko regarding the ryujin naalala ko may nag rereklamo don.
I bought one of these, but I'm disappointed with the screen quality. When placing the gifs, the quality is automatically reduced by the software, that is, I did not see any change in quality as promised. There don't seem to be any changes from Ryujin II. Did you notice that?
