No video :(

Roof Top Tent Camping! Build Your Overland Truck Bed Rack System

Подписаться 371 тыс.

Просмотров 277 тыс.

50% 1

Build your own truck bed rack to mount your roof top tent! I've seen these systems on many overlanding trucks and think they look awesome. This truck isn't really an overlander but it is great for towing my rock crawler to the trail for a little camping. With this rack I can mount a roof top tent and camp much more comfortably. With some creativity you can mount a roof top tent to ANY project! Enjoy the video folks! 👍
Buy this rooftop tent!
www.guanaequipm...
AMAZON ITEMS!!! www.amazon.com...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutio...
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlif...
Support us on Patreon!
/ dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
#overland #camping #welding

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 424

@dreamassassin2689 4 года назад

once again. 99 percent of the things i plan on doing, you have done and given me a base to go off of.. thanks brother

@Monuments_to_Good_Intentions 4 года назад

DreamAssassin26 when are you going to get started?

@AustNRail 4 года назад

Great to see you Americans catching up to us Australians in camping with your Ute.

@Pooooooops 4 года назад

We have alot more SUVs (or even 4 door wranglers) in our overland community because 50-60% or more of our country is actually tightly wooded trails. Remember Nathan said this is his tow rig, check out his choice of 4x4 (2 door Wrangler) and his own actual "overland" rig is a Disco.

@05blaz 4 года назад

If you are wiring up lights you could wire up a 12 volt linear actuator for lifting the frame up. They have good load capacity now and it will just be an up and down switch. Just some food for thought instead of the shocks that we know always fail and your tailgate glass ends up in the middle of your back.

@jeepindave5464 4 года назад

That truck is the holy grail of 3rd gen shipping crates.

@ronthompson2366 4 года назад

Look at Trailer lift gate assist... easy diy, garage door spring and some cable... you can find them all over for trailers used to haul ATVS and such...

@LenSilvester 4 года назад

Every video you do I pick up another tip or two for fabricating my off-road trailer, thanks for the great content!

@DirtLifestyle 4 года назад

Good! Thank you for watching 👍

@cjjohnson3939 4 года назад

That bead roll! Combined with the dimples looks tight! Nice job Nate 👌

@DirtLifestyle 4 года назад

Thanks! I love the look of this combo. More practice is needed but the possibilites just grew leaps and bounds!

@brendonmanship8854 4 года назад

YES!! I have a 2000 tundra that i want to build into a overland/ expidition truck and this is exactly what i wanted to do. This is awesome

@DirtLifestyle 4 года назад

Nice! I hope it helps 👊

@davidjchadwick 4 года назад

beyond my scope because of money and or tools, but love that you teach people and encourage. THANKS MAN. have some small tools for metal / welder and built onto my ranger bumper and play with doing metal projects. people like you keep the dream and fabrication going.

@JollyRogerHobbies 4 года назад

That bead roll you did looks great. I am glad you added it into the build, it makes it pop even more.

@roncameron9541 4 года назад

Freaking awesome. Us regular folks don't have your skills but we can watch and dream. Keep up the good work.

@DirtLifestyle 4 года назад

Thank you!

@Rick-4552 4 года назад

How could someone dislike this video, I think this makes the best content , keep it up !

@ashtonmariefranklin725 4 года назад

As long as you maintain and drive that cummins without beating on it, they will easily go a million miles before needing an overhaul. One of the most sought out truck setups for hotshot hauling. Now I'm waiting to see you drop a 4bt in the full size jeep you got. Lol

@murphtahoe1 4 года назад

Turned out pretty sweet. The bead rolling and dimples really gave it some flair and it has a really cool aircraft vibe. Can’t wait for the rest of the build.

@DirtLifestyle 4 года назад

Thank you!

@MalarkeyTaylor 4 года назад

It’s easy to grab the wires for the bed light from the a pillar for your under cage lights. Maybe not all of them but a subset so you can hit the unlock on keyless and get bed lights from it. Plus it stays on the battery saver for the tipm so you can put them on and they stay lit for 15 minutes or so and then go off (great for getting prepped for bed) Also the trucks have a high mounted tail wire hidden in the loom back by the hitch for truck caps that bring the third brake light back to the back of the truck so you can put a third brake light on it if you want without having to fuss with tapping wires or having it blink. Love the truck and the tent rig. Like to see more of it 👍

@jmboberg6 4 года назад

I can't help but think this is a direct response to my asking about building a rack for my JL on your fb page... Many thanks either way Nate

@DirtLifestyle 4 года назад

Huh? I'm not sure I I understand. Are asking me to build a roof rack for a JL?

@jmboberg6 4 года назад

@@DirtLifestyle like a week or so back i had asked for input on building my own rack and you (basically) said to just send it and if i make mistakes, it's like tuition all must pay to develop our skills. Next videos i see are 'Let me help build your 4x4' and 'building a roof rack'. Can't wait for the next one!

@WeBleedGreen1 4 года назад

I'm thankful I found your channel. You break everything down to get out and do it and provide tricks to make it easier. I suck at general fabricating but your channel gives me a new hope

@DirtLifestyle 4 года назад

Thank you for watching! In glad you found the channel as well!

@vincentcolosimo1 3 года назад

Just finished making mine from your design: 1/4" angle and 3x1.5x 1/8 wall rectangle for my Sierra. I have a huge RTT from 23zero and I am glad this rack is redundantly strong with no bolts that could loosen. Thank you so much for the guide.

@toasty2450 2 года назад

any chance i can get a review from you, in regards to the tent from 23zero, I'm currently looking at one too.

@adventureeverymile8135 4 года назад

Your videos are the benchmark for anyone making videos!

@DirtLifestyle 4 года назад

Thank you!

@rockitoffroad6752 4 года назад

Excellent work my friend. I think you are pushing me to try bead rolling at some point! rock on

@mikemorgan4670 2 года назад

Love how you dream up the concept and then create your vision. Fascinating to watch.

@fish_built 4 года назад

I built a flip up bed rack about a month ago, it works great and it's awesome to be able to get the tent out of the way if you need to access stuff at the back of the bed. I have gas struts on mine, a pair of 200lbs struts did the trick for me.

@shawnmorin3848 4 года назад

Nice work! Inspiring me to do something similar on my 2006 Duramax

@DirtLifestyle 4 года назад

Thank you! Glad to hear it!

@zuk4wd 4 года назад

That panel with the bead and dies. Looks amazing. Maybe you should add a linear motor to raise the rooftop tent to reach in the toolbox.

@DirtLifestyle 4 года назад

Thanks man 👍

@CKKnifeandTool 4 года назад

Great video Nate. The build looks awesome and yeah, you could make a dance floor on that rack!

@DirtLifestyle 4 года назад

Thank you!

@nothingtoseaheardammit 4 года назад

Damn this is timely. I'm about to start fabbing up a rack system for my M1102. Don't think an off-the-shelf systems are going to work for it.

@DirtLifestyle 4 года назад

Cool project!

@nothingtoseaheardammit 4 года назад

@@DirtLifestyle Yeah it should be. Going to need to brush up on my aluminum welding skills tho. Been a while.

@generallee4043 3 года назад

I like your shovel boxes that’s what I’m gonna build for mine I think I’m gonna put a lid on it with the same design materials just so I can lock them up

@owennickeson380 4 года назад

Look up Sachs stabilus lift supports, you can go by weight and length, and they also have thread ball hardware to mount anywhere, and essentially create a sprung door on anything

@jayr1757 4 года назад

*Love your creativity with this type of stuff, show me more.*

@DirtLifestyle 4 года назад

Thanks!

@metaldog7128 4 года назад

I like it..... but I think I would of put the roof top tent over the roof, and built a workshop in the back with some seating , a small work top with a vice and air compressor, some storage cupboards and somewhere to sit out of The Sun, rain, snow? 🤷🏻‍♂️ what I mean is that thing is MASSIVE Nat you got some good Real estate there 👍

@waijhou9529 3 года назад

Great video Nate, at first I was wondering why you wanted hinges at the back side, then realized the gang box issue.

@theshindogg 4 года назад

Newer subscriber here. I don't even own a truck, never been off-roading (greetings from New Jersey), or fabricated anything, but love your teaching and building style. It's obvious you're super experienced- most of the videos I've seen you're building as you go without detailed plans, and the results look great. Awesome videos- you deserve more subs, your content is great! Thanks man.

@DirtLifestyle 4 года назад

Thank you very much! I appreciate you taking the time to drop a positive comment! And I would recommend going offroad if you get a chance. It could change your life like it did mine 👍

@RyanMiller-ly4li 4 года назад

Could use an air ram to pop the tent up. Means you'd a little compressor and tank but those could be a project/content in themselves.

@EvanMoon 4 года назад

Ridiculously smart hinge idea.

@DirtLifestyle 4 года назад

Thanks brother! I look forward to getting the rest of the parts to test it out 👍

@masontorres4207 4 года назад

Been thinking of doin something like this to my first gen Cummins 🤘🏻

@kevinwatt5629 4 года назад

Cool build, looks sweet! 1 benefit of me being so short (5' 6" ) the back seat of my dodge is perfect, less stuff to clean when i get home from camping

@brandonq6373 4 года назад

I have my RTT on my utility bed work truck. First time mounting it was side ways. Every time since then I have mounted so that tent opens over the tailgate. Makes for a great kitchen without having to use an actual table. Also gives you possibility of mounting an awning off the side without interfering with the tent. Also having a rtt with the covered entrance, I can climb down to a work/kitchen station without getting hammered by rain. As a bonus, when my annex room is set up, tailgate is conveniently inside. Rare but has happened in Southern California mountains!

@cbreced1 4 года назад

I'm just here for the Dimple Dies lol... Great vid and info. Helps me think of ways, to think through the smaller projects I'm planning around the house.

@DirtLifestyle 4 года назад

Thank you!

@karsonkip697 Год назад

Amazing video. Really like the bushes hinges.

@don6317 4 года назад

Really enjoy your channel. Thank you

@DirtLifestyle 4 года назад

Thanks! I'm glad you enjoy it!

@Z71_Kevin 4 года назад

This giving me the idea to make a heavy duty ladder/kayak rack for my Silverado and to have the topper stay on the truck as well. I really enjoy watching all your videos as they push me to fabricate, thanks for the inspiration and great videos! Cheers 🍻

@offroad6309 4 года назад

I was thinking while watching, this is a perfect time to combine a ladder rack for hauling steel or lumber with the tent rack. Kill 2 birds with one stone.

@johnweiler8533 4 года назад

Your builds are always spot on for the average mechanic and builder. Much appreciated bro!

@DirtLifestyle 4 года назад

Thank you!

@peteslippyphoto 2 года назад

Just wanted to pop in here real quick and say that this video inspired me to build my own bed rack system for my RTT and I even went with a similar (albeit simpler) design. Really appreciate your videos Nate!

@fzj8022 4 года назад

Out of all the trucks to complain about not having enough room to sleep in the cab, a MEGA CAB DODGE?

@CowbellCustoms 4 года назад

I mean, the seats dont quite fold down all the way. And sleeping sideways in the back seat isnt the best either.

@DirtLifestyle 4 года назад

Lol

@ctrlnull5308 4 года назад

Lol

@rsiboy87 4 года назад

Well... it’s just an excuse to build an epic feature on the back, with loads of functionality. Lol

@ericl5973 4 года назад

Sleeping in the back of my Megacab is not great. The 8ft bed in back is much more comfortable.

@Gonzo.S.Thompson 4 года назад

Looking good.

@bmxrr1990able 4 года назад

Your videos make me wanna get in the garage more and more love it keep it up

@DirtLifestyle 4 года назад

Thank you!

@lesszabo5625 4 года назад

Really enjoy your work, and your ability to visualize what you want and then fabricate, awesome.

@DirtLifestyle 4 года назад

Thank you!

@Tbmx8 4 года назад

Knocked it out of the park once again. Well done man looking forward to the next video.

@jeffkalte2929 4 года назад

Great job Nate!!!

@DirtLifestyle 4 года назад

Thank you!

@jamesbrekle7533 4 года назад

I am planning on making a rooftop tent rack that swings in a sinilarish manner. Except the tent stays level. I want to tuck it below the roof line but then swing it up to be able to pop the tent open. This is partly because I have a toolbar that I like the look of. I came up with an excel sheet that lets you plug in parameters of mounting distance and force and spits out how much net torque you get from the shocks at any particular angle, telling you how hard you have to pull to lift the rack. I’d be happy to share it with you if you’d like

@jasonpeters950 3 года назад

Hey James. I'm looking at doing something similar to what you describe on my truck. Have any pics or any other info you can share?

@stevemartinism 3 года назад

Your so busy! Appreciate your time making this video.🇺🇸

@kg2995 4 года назад

Nice work. I just started a similar build with 3/16 aluminum plate.

@xsweetxvampirousx 4 года назад

Some day I aspire to fab things like this. Keep up the good work my guy

@DirtLifestyle 4 года назад

You can do it!

@johnnyreynolds6014 4 года назад

I own a 05 dodge dually. I have been thinking of building a rack system . Thanks for the ideas.

@mnsterbruiser 4 года назад

If only my shop had that magical pile of steel stock on the floor that is there every episode.

@gallamine 4 года назад

Maybe I've missed it in previous videos, but some time can you comment on why you'd use the chopsaw for cuts instead of the plasma cutter?

@DirtLifestyle 4 года назад

It's faster, cleaner and makes no smoke 👍

@declanholden72 4 года назад

first time seeing this channel . really really good channel from a new fan in Ireland .

@nathanplatt5517 4 года назад

The gas shocks that lift up a 97 to 99 Ford Expedition back patch would probably be plenty of strength to lift up that roof top tent. The back hatch on those Ford Expeditions are roughly 225 lb. The newer Expeditions have an aluminum lift up hatch so the gas props aren't rated to lift as much since the doors lighter but the 97 and 99 has a really heavy Steel lift back hatch

@davemc8598 3 месяца назад

This is baddass. Love that you fabricated your own stuff. Inspiring!

@bengram8239 4 года назад

Was just talking to the brother yesterday about doing up a tub rack for my d22 with a few ideas of how to do it, this is perfect although I won't be needing the hinged section haha

@DS-rj9db 4 года назад

Perfect timing...I was thinking of building one to replace my Fiber Glass cover. Excellent Design.

@wyattoneable 4 года назад

You came up with a simple and effective design and executed it nicely.

@brucegill4218 2 года назад

Yo my friend I'm a little new to your channel but you seem like you know what you're doing man that piece you made with the roller on the side of your tent build look pretty good for somebody that doesn't really know how to do it very well you look pretty professional keep it up man it looks killer you have a good day and stay safe see you

@pnwfabulous3454 4 года назад

Nice work! I’m building a Jeep trailer right now. With a tent mount using 1x2 Rec tube 120 wall. Just put a 14 bolt axle on the trailer. 6” lift kit and 36s on a 77j10 box. Nice work on your rack! I like the angled look you have going on. Looks badass on the dodge!

@judeelfert9082 4 года назад

I see that you’re a Cummins fan! Love that! You should do a 4BT in the J-Truck

@aaronyoung8028 4 года назад

As if Nate couldn't get any cooler, he daily drives a 5.9 dually Dodge!

@cnc75adventures49 4 года назад

Well now that dent in the tailgate is really going to stick out rack is looking really good man👍👍

@JakeSpurlock 4 года назад

Def. feeling inspired by this post...

@DirtLifestyle 4 года назад

Good! That's what I'm going for!

@LJ_Jeff 4 года назад

So far this is a great lookin unit! Excited to see the next video on it.

@DirtLifestyle 4 года назад

Thank you!

@ymxb6253 4 года назад

I really enjoy the videos, gives me the confidence to jump into fab projects. I have a 2005 4runner that I want to build for some mild off roading. Currently doing a lot of learning and getting everything squared away on maintenance, but then I want to get into making some stuff. Looking to upgrade suspension and tires, fab some sliders/steps, and build a bumper. Thanks for the awesome videos!

@shawnvergilia1609 4 года назад

Top notch as always

@DirtLifestyle 4 года назад

Thank you!

@BadgerBishop 4 года назад

It's not a shock you want, it' a "gas strut". Great build!

@hawthornhide7371 4 года назад

Yes thank you! I’m a tree surgeon by trade and my work pickup is also my fun vehicle. I’ve wanted to build something like this but 2-3 times taller to hold woodchip and have the roof tent easy to take off. This has helped me plan so much, you are an utter god. 100% buying some merch soon! You ship to the UK don’t you?

@DirtLifestyle 4 года назад

Thank you! We do but you will need to email my wife to get a cost on shipping. She has all the infor on our website. I appreciate the support 👊

@ms.karihart2983 4 года назад

Inspiration to get out and build

@highwaykev4903 4 года назад

Good work and practice makes perfect is how the saying goes. I like the fact you like to be different as I do to. In my job I haul metal everyday on a Flatbed for Nucor. Been planning on getting a sheet metal break and bead roller once I build a shop. Looking forward to your next video.

@DirtLifestyle 4 года назад

Thanks buddy! Good luck on the new shop. You wont regret having a place to play 🤘

@JoeGarofaloII 4 года назад

Dang Nate, you have the same Jeep as me and my dream truck! This is awesome because I get to see all the upgrades you do to give me ideas for my projects 👍

@DirtLifestyle 4 года назад

Nice buddy! These are great trucks. Very reliable 👍

@dragster9886 4 года назад

And that is my dream truck 5.9 cummins dually 6 speed and the mega cab just adds to the awesomeness

@moedalgarny 4 года назад

i am planing a to rebuild the sheep place in our farm with some of my my idea's..but gusse who inspire me..yeah the legend him self..nate 😁

@DirtLifestyle 4 года назад

Lol thank you! Legend is a strong word 😂

@williampetersen4084 4 года назад

You have a marvellous taste in vehicles. Keep up the good work! 😎👍 On another note! You should really make a subscriber showroom or something along those lines. It’d be absolutely mint to see the stuff people have made from watching your videos. 😁

@DirtLifestyle 4 года назад

Thank you! I will look into it!

@erniemyslinski4113 4 года назад

Awesome video. I am looking to build my own roof rack also soon to work with a RTT but I have to work around my tool box as well because I don’t want get rid of it and I really like that hinge idea.

@DirtLifestyle 4 года назад

Thanks!

@joopsnbeer2769 4 года назад

100% my favorite creator on youtube. Keep up the great work Nate!

@DirtLifestyle 4 года назад

Thank you!

@stronghandranch5227 4 года назад

Once again outstanding design and build.

@DirtLifestyle 4 года назад

Thank you!

@rzr4956 4 года назад

Looks good

@williamdouglas1996 4 года назад

Outstanding work. Now I need to figure out how to do it on my excursion.

@samsoncarr9950 4 года назад

Your channel has to be one of the best on youtube!! Always great content.

@DirtLifestyle 4 года назад

Thank you!

@TheMrbear186 4 года назад

Damn this thing came out so badass. Excellent work as always

@DirtLifestyle 4 года назад

Thank you 👍

@reecebrown2081 4 года назад

i love the vids nate from australia mate

@malcolmyoung7866 4 года назад

Cool project, Nate. Really enjoy watching and always learn something new(or something’s) Thanks for sharing..

@DirtLifestyle 4 года назад

Thank you for watching buddy 👊

@greendodge98 4 года назад

Great job Nate. Wish I was there helping I could have showed you some tricks on the bead roller.

@Zapo9668 4 года назад

I love you videos and they inspire me to do more fabrication

@DirtLifestyle 4 года назад

Thank you! I'm glad to hear it!

@georgeeads8689 4 года назад

That is a great idea. Great video Nate.

@jried9378 4 года назад

Bad ass! You’ve quickly climbed up to one of my fav youtubers. Keep up the good work

@DirtLifestyle 4 года назад

Thanks! I'm honored!

@jaxtontalbot8881 4 года назад

Dude, I just found your channel (thanks to my dad) and I’m stoked you did a video like this! I’m building up an 86 D-150 (In process of converting to 4wd... I couldn’t find a W-150) that I plan on making into an Overlanding Build. I want to do something similar to this, I was thinking more about having a canvas bed cover with a steel rack built around it to provide storage. I love your direction, and I’ll definitely end up using this video as some influence to that build.

@DirtLifestyle 4 года назад

Thank you! I'm glad you found the channel 👍

@jtdehaanjr 4 года назад

Awesome build Nate! Look forward to seeing where it ends up.

@DirtLifestyle 4 года назад

Thank you!

@MrStevoovets 4 года назад

You're going to have to make the rest of the tow rig look as cool as this will.

@DirtLifestyle 4 года назад

Lol agreed

@sammcgowan9148 4 года назад

I thought the music was a really nice touch during the fab montage, awesome video as always

@DirtLifestyle 4 года назад

Thank you buddy. I appreciate the positive comment 👍

@peterwatson8295 4 года назад

nice video! I like the monday friday upload schedule. I love seeing unique stuff like the beadroller, that thing is sic!

@DirtLifestyle 4 года назад

Thanks! It's a dog fight making two videos a week but I love it 👍

@bblakebrown 4 года назад

You should have used heavy duty sliders to slide the tent frame back out of the way to access the toolbox.

@satarbhatti759 4 года назад

Good

@hazards20001 3 года назад

Use yellow light near cooking area so you don't attract bugs...

@redneck6pack 4 года назад

You are so spot on where I am at on thinking about setting up my Gladiator!! Literally I have been thinking EXACTLY like you! I work the oilfields in North Dakota but live in Kennewick WA it’s a 16 hr drive one way and sleeping in the back seat of the Gladiator is... not good rest! So I need a rooftop tent. Also I need water proof and theft proof because I park my Jeep and crawl in my Semi and it’s 4 or more weeks before I get back! I want to build the rack and then sheet the roof and sides with aluminum and the rack itself is aluminum because I want to keep the weight down but need it strong enough to support 4 ( we are adopting 2 kids) you just gave me a huge idea! I too want lights and we are right there with you on “ Tailgate “ cooking! I eagerly await your next video and hopefully you can maybe do one on how to weld aluminum?

@tonymontgomery5827 4 года назад

Bud I live on the Oregon coast, we should talk about setting our gladiators up for a northwest package. I have a few ideas I'd like to bounce off you.

@DirtLifestyle 4 года назад

Sounds like a fun project! I'm no expert at aluminum welding. After more time honing my skills I'll definitely make a video 👍

@redneck6pack 4 года назад

Tony Montgomery I am very interested in doing this! Thanks

@redneck6pack 4 года назад

Dirt Lifestyle I was thinking of cutting and bolting it because I can’t weld it either? :( I am open to any light weight but strong ideas you got