Room EQ Wizard (REW) Tutorial - What's going on in my room? Measuring speakers. 

I´ve seen many REW tutorials and this is the best up to now.

Although I already watched the german version, I'm watching it again in english 😄 may the algorithm favor you!👍😉

I needed a very basic tutorial, this is the best one I found so far. Thank you very much

Best tutorial on this site that isn't full of fluff and unnecessary info. Laymans terms. Thank you!

Very eloquently explained, thanks!

Awesome tutorial!!!! Really instructive. Thank you very much. People is right: this is the best on the Internet.

Great video the best one i have seen !!

Excellent tutorial! I'll be trying this out sometime soon :)

I've just taken delivery of a lovely pair of white, 8341's. Beautiful speakers. 👌 Will be doing exactly what you've done later on today. Thanks for the video!

Fantastic video thank you!

Awesome video, thank you! This was great

Fantastic video tutorial! I'm new to REW and have watched many RU-vid videos trying to learn how to integrate my subs with my mains. I spent hours and hours trying to refine EQ to get a flat frequency response without success. This video was the best at showing how to have REW calculate EQ settings. Thank-you!

This is fantastic!

This is amazing. Thank you

Great tutorial! Thanks!

This video is very helpful ! Thank you :)

Thank you for the English version !

Excellent video! Please update the process using the latest version of REW.

Thanks

After spending days watching REW tutorials for a complete beginner, you have condensed every point needed to use REW for basic EQ corrections in to a straight forward and simple to understand tutorial. THANK YOU ....... THANK YOU.... One question... The eq I use is internal Peq setting in my Yamaha Home theatre receiver. Do you know which named eq device that REW shows is closest to Yamaha Peq? Should I choose Generic and input them manually? I am a complete beginner but willing and capable of lerning how to use Peq.. Thank you Jason.

Sehr cooler Eintracht Frankfurt Sticker 😄💎

Thank-you for sharing. I have used my EQ with one system using Min DSP and another using Roon's EQ. Great results......What room curve would you recommend for my kitchen speakers in a very large room with lots of hard surfaces. Just a starting point.

How do you fix the ringing issue at 30hz ? I have more then 1000ms decay

Thanks for the great tutorial! Can it be that individually tuned speakers interfere with each other, causing boost and cancelations? I refer to your recommendation to always measure and EQ each speaker individually. If combination of reflected waves of the speaker can cause dips and boosts, woul not the same be true for direct and reflected waves coming from the other speaker? Don't we lose this info if we measure individually?

Great Tutorial Marcel... when measuring multi speaker setups in a venue or event space we would measure speakers individually and apply individual corrective eq per speaker channel is this similar to your process?. Also, in multi speaker setups I’m interested in where you place microphone, in front of each speaker?, at what distance? Or do you leave it placed generally in the main listening area? Thanks

greetings, great video. I still cant get my routing down... I have a UFX II RME. how do I send same signal thru to also use as reference on same device? the rew preferences for same channel i/o is grayed out.. please help. I am a musician and mix man, but i suck at this

Where to put the mic - in front of a speaker (1m away), or at the listening position? I don't have a studio, but hifi stereo listening setup

Hi I did as you instructed the waterfall is showing reverberation of up to 2 seconds!! yet I can barely hear any reverb when I clap or play a low sine wave. Is it possible I am doing something wrong ? My room is surrounded with absorbers and bass traps. I am pointing the microphone to my speaker from my listening position.... it's odd

At around 7:40 when trying to adjust to get the middle of the sound pressures, can the software just provide an RMS value to do this instead?

Hey, quick question, can I use a cardioid condenser mic for this measurements?! I have a rode nt1a! How does REW compensate for the mic’s frequency response, please and thank you

When generating the EQ curve where did you get the 57db target level from again?

can i use my beta58a pointed at the speaker or do i need something omnidirectional?

I think I missed something. Once you've generated your eq correction values, how do you get a new measurement with the corrected signal? Does REW have a way to generate an adjusted test sweep?

what for microphone is that? I didn't understand the model name

How do I set up my sonarworks microphone to take a measurement in REW?

Gruesse aus Prag. Vielen dank fuer die Videos. I have a question to the ringing of the room at the room modes: Does the equalizer shorten the ringing time? I used to worry about the ringing created by a subwoofer port or a passive radiator. Now it seems to me that the subwoofer port ringing may be actually meager compared to the room modes. I have some experience with DSP programming, thus it seems to me that there is a chance, that with DSP amplitude and phase equalization we can actually suppress both the room ringing and subwoofer port ringing, or at least one could lower the time spread by pre-ringing thus achieving a symmetrical time response. Does the Room Equalizer software allow for that? Or is it just equalizing the amplitude response?

Interessting way to set the eq correction: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RE5FwJavYW0.html

I appreciate the overview, but room correction EQ is terrible unless you are using it only for small touches after you already treat the room as well as possible. Any drastic reliance of a Room correction EQ system ruins the natural timbre of a monitor and driver set. I can assure you it affects them and their harmonics and resonances in a way which you want to minimize. Remember the saying "Less is better". In addition, Genelec is good, certainly much better than Dynaudio, but i find them just a little bit overrated. Have you heard Adams? Once you go to the ribbon tweeter, there is no coming back. The extended range of the silky detail is unparalleled. Also that correction of that Genelec overlayed is not impressing me at all. That should be doing a better correction than that, but regardless, im not a fan of drastic corrections. You may wish to use membrane traps and perhaps some helmholtz resonator methods in the treatment approaches you are going for.

his voice is weirdly similiar to that evil guy on mandalorian in season 1...

Gerne hätte ich Ihrem Beitrag gelausch buT wiß harT Außßsprche ißt es leiter noT pßßßiple - Schade