Rotor and front pad replacement on a 2015 Road Glide

Подписаться 395

Просмотров 21 тыс.

50% 1

Listed below are the part numbers for the parts used in this video. Consult your manual or parts department for your bike's needs.
Brake Pad kit 41854-08
Brake Rotors 41500017
Rotor bushing 41500018
Rotor Springs 41500019
Rotor bolts 41500020

Опубликовано:

5 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@UltraLimitedHD 2 года назад

Best brake replacement video, good lighting, audio and no constant annoying music, saving this one!

@motorcycleryder9489 2 года назад

Thank you, I appreciate that! I'm just a shade tree mechanic, so as always refer to your manuals too!

@yepok2957 3 месяца назад

Friendly advice. Hand thread all bolts on the wheel at once. Then tighten, hopefully not experiencing the washer being misaligned.

@blues3824 2 года назад

Nicely done with good information. I won't be replacing my rotors myself, but this video tells me what to look for before and after the replacement .

@motorcycleryder9489 2 года назад

Glad to help! Ride safe!

@jimsnellen6222 2 года назад

Very good job, concise and to the point. I’m afraid I have a runout issue as well and will follow your video to R&R my rotors and pads too.

@motorcycleryder9489 2 года назад

Thank you for the feedback, good luck on your project. Ride safe!

@darrylyancey6753 Год назад

Nice video. You are the man, great replacement of parts.✌🏿

@motorcycleryder9489 Год назад

Thank you, I'm definitely not a technician but I try! Ride safe

@whiskeyadventures7003 2 года назад

Thanks for that... nice work

@user-eh3cs7jq9y 4 месяца назад

Perfect!…the way I like to see and understand! Q: No need for lock-tight on any of the bolts?

@motorcycleryder9489 4 месяца назад

The single use rotor bolts have a factory applied thread locker. The rest don't require any per my shop manual. Consult your bikes manual of course! Ride safe ✌️

@alfredamos5474 2 года назад

Great video! Thanks!

@motorcycleryder9489 2 года назад

Very welcome! Glad it helped! Ride safe!

@gofarit Год назад

My brake caliper on the bolt side will not fit into position, not enough room to get it in the bolt on position... any ideas about how to make that work?

@RG-rq3ov 11 месяцев назад

Thank you for video. Was your vibration when you applied brake or without braking? I’ve had brake vibration on 2020 road glide limited between 65 and 75 mph. Dealer replaced rotors, pads, and hardware on front wheel and all was good. Also replaced both tires due to wear. 4000 miles later, same vibration is back. Taking back to dealer shortly. Just wondering if problem is similar to yours. Thank you.

@rolandb.campos4535 2 года назад

Thanks for this helpful video . What brand of torch wrench your using?

@motorcycleryder9489 2 года назад

Glad you enjoyed the video! I use a Craftsman 3/8, and a Snap-On 1/2 torque wrench.

@safeeffective385 8 месяцев назад

So, which "side" is better? The left, or the right? 🤔

@sterlingdrummond3381 4 дня назад

I missed the Pinch pin torque.

@Greg-bc5wm 2 года назад

Very good video. Does the wheel need to be balanced after replacing the rotor?

@motorcycleryder9489 2 года назад

I've never had too, I think the replacement rotors are relatively well balanced. However, with that said I guess it could be possible to get a balance issue after install. Your test ride before and after replacement would reveal that information. Good luck and ride safe!

@Beach5289 Год назад

Thats why I like to run "Ride On" in my tires , continually balances the wheel / tire through out it's life , and no ugly wheel weights .

@sgtrock2821 2 года назад

Great tips thanks much. what size are the rotor bolts?

@motorcycleryder9489 2 года назад

The bolts are a unique design specially for mounting the rotors. They should be available at your local dealership, I don't have the specs.

@user-tu2dg7um9q Год назад

Are the rotors supposed to have some play?

@Mike-tb7li 11 месяцев назад

Both my clips came out and if it wasn't for my light wires I would have lost my bag, unfortunately it damaged the lid only

@michiganborn8303 2 года назад

Saw this video after the fact. How much of a mistake did I make facing my rotors with the part# facing inward? Is it a matter of life and death that they face outward or is this something that can slide?

@motorcycleryder9489 2 года назад

If your rotors are the same as mine, you will likely be ok. If they are the old style with pockets for the bolt heads, or if they are directional it could be a problem. I would advise calling your local dealership to see if it makes any difference on your particular setup. Ride safe, and good luck!

@michiganborn8303 2 года назад

@@motorcycleryder9489 Thanks. These are non directional and the don't have the receded part for the bolt like the original. These new ones have a smaller 3.5" diameter bolt vs the original was closer to 5.5".