How To Replace Brakes On A Harley Davidson Street Glide

Подписаться 3 тыс.

Просмотров 34 тыс.

50% 1

How To Replace Brakes On A Harley Davidson Street Glide. Planning for the years long trips requires some maintenance. In this video I show you how to replace the brake pads on my 2015 Street Glide Special. I go into detail about each step and provide torque specs that will provide a complete guide to replacing the brakes. #harleydavidson #howto #sinisterclutch #harleybrakes
EBC Double-H Sintered Front/Rear Brake Pads
amzn.to/3sU07kZ
Drag Specialties Replacement Brake Pad Pin
www.jpcycles.com/product/220-...
Mityvac MV8000 Professional Single Person Manual Brake and Clutch Bleeding Tune-up Kit
amzn.to/3FhRMMW
Powerbuilt Brake Fluid Tester
amzn.to/3P2GIb9
Music: www.bensound.com/
Instagram - / sinisterclutch
Videezy.com
Send Mail
SinisterClutch
P.O. Box 311
Walton, KY 41094
DISCLAIMER:
Under no circumstances will SinisterClutch be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by SinisterClutch or a third party. In no event shall SinisterClutch be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of SinisterClutch, it cannot guarantee against improper use or unauthorized modifications of this information. SinisterClutch assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. SinisterClutch recommends safe practices when performing any mindfulness, physical, or financial activities seen or implied in this video. Due to factors beyond the control of SinisterClutch, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of information contained in this video is the sole responsibility of the user and not SinisterClutch.

Опубликовано:

13 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@GoofyBastard 2 года назад

You are always the man Randy when it comes to videos like this!!! I don’t own a Harley and I even watched!!!

@SinisterClutch 2 года назад

Appreciate it brother! Not much riding with all the rain.

@Wind.Road.Therapy 2 года назад

@Goofy Bastard, I agree

@KrakensGarageandAdventures 2 года назад

Outstanding DIY video Randy. Sintered pads are a great upgrade. As a rule of thumb, I do replace the retainer pin each time I service the breaks. This video will help many folks out. Eric

@SinisterClutch 2 года назад

Thanks Eric! I agree why not replace the pad pin and retaining clip. Better safe than sorry. Take care✌

@johnchargualaf6599 Год назад

Excellent demonstration Randy👍👍

@SinisterClutch Год назад

Thanks John! Appreciate you watching ✌️

@mikebodine4164 2 года назад

Hey Randy great video on brake pad change. Thank you for sharing this with us.

@SinisterClutch 2 года назад

Thanks Mike!

@pamalbney7136 3 месяца назад

Thanks for the video. Im leaving on my bike in april to take a solo trip around the US for 5-6 months visiting tik tok followers & friends. So im getting my bike ready. I never did the back brakes before. But i know i can do it. I will also change my oil today. The tranny fluid & primary fluid only have about 2000 miles on it so im not gonna worry about that before this trip. If i end up riding and excessive number of miles, i can change that shit at a friends house. No biggie. I did my front brakes a month ago. and got a new rear tire. But it's back brakes & oil change today. Ill take the front wheel off next weekend to take in and get a new tire. And I'm ordering new speakers for the front fairing because I blew one out a few weeks ago. Gotta have music for this ride. But I should be ready to go on an adventure of a lifetime. Again, Thanks for the video. It's all I needed to know. 🤘✌️

@dennisgriffith2670 2 года назад

Thanks that's a really great how to video. I had the brake calipers off my Road King today for putting Legend Axeo's in the front forks now I'm going to have to check my bike to make sure I have the ABS sensor on the proper way.

@SinisterClutch 2 года назад

I love my Legend Suspension! Glad I could help and thanks for watching✌️

@GuysDoingThings217 Год назад

Very nice video I will be replacing my pads this week!

@SinisterClutch Год назад

If you have any questions let me know

@Wind.Road.Therapy 2 года назад

You make it look so easy. Well done

@SinisterClutch 2 года назад

A second person would help 😂😂. Thanks!!

@Wind.Road.Therapy 2 года назад

@@SinisterClutch I totally get that. When I lifted my tank I used a couple of soda bottles to hold it up, a second person would have helped

@jayunitedwestand1810 2 года назад

great video bro...thank you for this i think i can do this job myself now...

@SinisterClutch 2 года назад

Glad I could help! Appreciate you watching. If you have any questions let me know. Take care ✌

@borisjohnson2346 День назад

Tengo.las.pastillas pegadas al disco algun comsejo que puede ser por donde intervenir

@randywendt Год назад

Great video. Thanks for the torque specs also. I have a ‘15 ultra Classic so I’ll have to check if they’re the same.

@SinisterClutch Год назад

They should be the same but for sure check the manual. Hope the video helps. Take care and enjoy the ride 🤙

@HDVIBE 2 года назад

Thanks for sharing this video Randy. I also change my brake pads and have no issue doing it. I often get asked why I do it and is it safe. My answer is I like to SAVE money and if you take your time and follow this process, all is good. Ride safe 👊👍🇺🇸

@carltonhinote2247 Год назад

Very good video . Thanks

@SinisterClutch Год назад

Appreciate you watching and commenting. Take care ✌️

@GlidingOnTwos 2 года назад

I never tried those pads from EDC. I might have to give it a try. I do my own brakes as well and just always used the Harley pads. Looks like you had at least another 10-15k miles left on your old brakes, ship them to me 😂. Just kidding!! Great how to video 👍🏾.

@SinisterClutch 2 года назад

Yeah I still had some mileage but the squeaking drove me crazy. Plus I got a 5K+ trip coming up. Appreciate you watching brother. Take care 🤙

@eprohoda 2 года назад

Bonjournice to meet you.Love it! splendid edition-farewell~

@SinisterClutch 2 года назад

Thanks! Appreciate you watching 🤙🤙

@texantakakoolarrow_5820 2 года назад

That brake bleed kit looks familiar! Thats a pretty nifty brake fluid tester you gots there fella! It would tell me that I'm not using any brake fluid by now! lol Great vid!

@SinisterClutch 2 года назад

Your brake fluid is probably like pudding 🤣😂.

@texantakakoolarrow_5820 2 года назад

@@SinisterClutch your tool would probably tell me I have to much brake fluid in my water! 😂

@shawnselvig9683 Год назад

Thank you,well done

@SinisterClutch Год назад

Thanks for watching 🤙🤙

@RidingHumboldtCounty 2 года назад

Well done sir I couldn’t do that lol 😂. I can fly a drone around it while you’re doing all the work lol 😂

@SinisterClutch 2 года назад

I need a drone. Being looking at the DJI and Skydio 2

@OZARKSHDRIDERS 2 года назад

Nicely done Randy, lot's of good details on changing out the front and rear brake's, I'm glad you did this video brother, it will definitely help other folk's out that are considering to do there own brake job, and the EBC brake pads I installed on my Tri Glide are definitely way better than the Harley one's, good video brother💯👊🏽😎

@SinisterClutch 2 года назад

Appreciate it 💪👊. If I can do it anyone can 🤣😂. So far the EBC are great and hope they last long like they are supposed to. We have plenty of miles to test them. Ready to ride brother 🤙

@OZARKSHDRIDERS 2 года назад

@@SinisterClutch Me too brother, like right now lol💯👊🏽😎

@msbudz670 9 месяцев назад

Thanks. I need to replace the brake pads and brake fluids on my H-D FXSE Pro Street CVO and FXSB

@SinisterClutch 9 месяцев назад

I have a video on the brake fluid as well. My bike has ABS so it’s a little different. Thanks for watching and commenting. Take care and enjoy the ride✌️

@msbudz670 9 месяцев назад

Got it... Will check it out.

@MrGalanoplos Год назад

we just got a new to us 17 Street Glide. so this helps, my odd ball question is, is it save to put anti-sequel on the back of the pads? thank man

@SinisterClutch Год назад

Actually if you buy the Harley pads they come with an anti-seize grease and a template to apply it. So it’s safe but I don’t think you need it. I’ve never had issues. Thanks for watching 🤙✌️

@rayrodriguez4653 25 дней назад

Thank you

@SinisterClutch 25 дней назад

You’re welcome and thanks for watching 😂✌️

@MRGS48 2 года назад

The wear on the pads obviously was caused from riding “blow up “ or it’s just me??🤣🤣🤣🤣 Great video brother

@SinisterClutch 2 года назад

😂😂🤣 probably so.

@HarleyDayRider 2 года назад

This is just what I needed. My front are squealing bad. Can you send me a link where you bought the pads? Ride Safe

@SinisterClutch 2 года назад

I bought them from JP Cycles. There is a link in the description. Glad I could help.

@Yakmandave 3 месяца назад

Awesome video Sir. One question, is grease necessary for the outer part of the brake pads?

@SinisterClutch 3 месяца назад

I did some research and didn't find anything on the EBC saying you needed to grease them. Also I didn't see other folks greasing them as well.

@Yakmandave 3 месяца назад

@SinisterClutch thank you Sir appreciate you!

@SinisterClutch 3 месяца назад

@@Yakmandave Thanks for watching and commenting. Let me know if you have more questions.

@bobgil3464 5 месяцев назад

How do you like the EBC brake pads after riding for awhile?

@SinisterClutch 5 месяцев назад

So far they have been great. Definitely recommend them

@gtnoslp Год назад

Good video! Proably good to mention to use DOT5 Silcone brake fluid on your Harley, not DOT 3 or 4

@SinisterClutch Год назад

The service manual says DOT 3 or 4 so that is what I use. Appreciate you watching ✌️

@gerry6310 11 месяцев назад

Are the front and back pads the same EBC FA409HH ?

@SinisterClutch 11 месяцев назад

Yes sir same ones. Let me know if you have any other questions.

@rollinstone1969 2 года назад

Were you going to VAMM this year. Watched the live stream with CDLNEPA everyone else said they are going.

@SinisterClutch 2 года назад

No it switched to July and I already made plans. I’m riding out west to Wyoming and Montana

@rollinstone1969 2 года назад

@@SinisterClutch if I had the time I’d go with you.

@SinisterClutch 2 года назад

@@rollinstone1969 You need more time 🤣🤣

@humblehustler2080 Год назад

Great video!That's one bad ass seat you got any chance you wouldn't mind dropping the name of manufacturer or style of seat? Thanks in advance just subscribed 💪

@SinisterClutch Год назад

It’s a Saddlemen Road Sofa. I have some videos on it. Appreciate you watching and subscribing. Let me know if you have questions.

@ed0985587 Год назад

Update on your thoughts on the EBC pads? About to replace mine but have heard of them being pretty noisy. Also I know the stock Harley kit comes with brake grease you apply to the back of the pads. You don’t use the grease?

@SinisterClutch Год назад

The EBC pads do make a noise but it's not a squeaky noise but more like a whiney noise but not crazy loud. These did not come with grease but they were not a kit nor did I find a kit at the time. I did some research and didn't find anything on the EBC saying you needed to grease them. Also I didn't see other folks greasing them as well. Would I buy them again? Yes because they don't throw dust like the Harley ones and supposed to last longer which I'm still waiting to validate. Thanks for watching and let me know if you have any more questions. Take care ✌

@ed0985587 Год назад

@@SinisterClutch Appreciate the quick response! I’m looking for pads currently and was curious. I also have white walls on my RK Classic, so good to know about the brake dust. One other thing, I know the Harley kits come with a new caliper pin, do you think it’s needed or just swap the pads this go around? I’ve got 17k miles on likely original pads.

@SinisterClutch Год назад

@@ed0985587 I always replace the pad pins and retaining clips. That’s just my preference. Now as long as there is no damage to either then you can get away with it. But that’s up to you.

@ed0985587 Год назад

@@SinisterClutchPerfect, thank you for the replies!

@SinisterClutch Год назад

@@ed0985587 Happy to help.

@darrenlingerfelt5879 2 года назад

👍

@EasyRiderGreg 2 года назад

I wish bikes still had cable operated drum brakes. They were so much easier to work on and it was way easier to check your tire pressure without that rotor in the way. Looks like you still had plenty of brake pad left. Good job.

@SinisterClutch 2 года назад

Sounds like things got complicated. Yeah I still had some brake left but got a 5K trip coming up and the squeaking was driving me crazy. Thanks for watching Greg

@EasyRiderGreg 2 года назад

@@SinisterClutch Yes I have replaced pads just for squeaking too. I do tend to push it to get longevity out of everything. I wait until my tires are bald before replacing them. I'm a cheap sob. LOL

@SinisterClutch 2 года назад

@@EasyRiderGreg 🤣😂 don’t blame you me too

@andyeippert1111 Год назад

I’d rather have brakes that actually stop you. The old drums might have been good for a small bike, but not a modern dresser.

@rollinstone1969 2 года назад

I put the EDC on my road king. I think if you get the sinthered pads they squeak. And man you had at least another 50k on those pads lol

@SinisterClutch 2 года назад

Don’t tell me that 😂🤣. So far no squeak but to early I’m sure. I don’t know about 50k but they had 20k on them already.

@derekallen6043 10 месяцев назад

Is there a difference inboard and outboard pads or if they go in it’s right ?

@derekallen6043 10 месяцев назад

No anti-seize where the piston contacts the back of the pad sometimes they come with a stencil

@SinisterClutch 10 месяцев назад

@@derekallen6043 Supposedly Outboard provides better cooling and easier maintenance. While Inboard its quite the opposite with creating more heat and harder to maintain. That doesn't play a factor for me because these are outboard brakes for my bike and I'd have to install an inboard kit to use inboard brakes. Also regarding the grease, I contacted EBC because I was curious as well and they said it was not needed.

@RidingHumboldtCounty 2 года назад

Hey brother I’m taking a cyber break but I realized that I’ve been missing your content. My bad 😣.

@TheBlueBikeDoyle 2 года назад

Nice now come do mine lol

@SinisterClutch 2 года назад

😂🤣 right! Will work for beer 🍺 🤣

@heritage_cowboy6568 Год назад

It's been a year, how did them pads holdup?

@SinisterClutch Год назад

Still looking good. I’d definitely buy them again.

@kevinturpin7937 Год назад

Lesson I just learned because I was lazy and didn’t do it myself brake pads front and rear and brake fluid change @ Harley dealer $640. Don’t be lazy if your mechanically inclined

@SinisterClutch Год назад

Wow it’s that much? Labor must be crazy high.

@kevinturpin7937 Год назад

@@SinisterClutch I was just trying to get it done before bike week in Panama City and didn’t have time. Next time I’ll make time for $420 in labor

@SinisterClutch Год назад

@@kevinturpin7937 Yeah life happens when we make plans. I’ve been there before. Wow for that much I need to start working on bikes and charge half the labor 😂😂

@pamalbney7136 3 месяца назад

I am getting ready to change my rear brakes today. I just did the front brakes last month. Then Ima pull off the front wheel & go get a new tire. Ima video all of it. I got this!!!