Royal Copenhagen Porcelain Bulldog Repair

Подписаться 4,1 тыс.

Просмотров 11 тыс.

50% 1

Watch me repair this porcelain bulldog. This is a relatively routine porcelain repair. Part of this video appeared in one of my how-to videos.
Learn more about my restoration business, including contact information at my web site: www.tesserak.com
Here are some of the tools and materials I use in my restoration business.
A+B brand epoxy putty: www.aplusbputty.com/epoxy-put...
A+B brand epoxy paste: www.aplusbputty.com/fast-past...
Milliput epoxy putty: www.milliput.com/products.html
HXTAL-Nyl 1 liquid clear epoxy (for glass and porcelain): www.hxtal.com/
Micro Mesh sandpaper: micro-surface.com/micro-mesh-...
Sylmasta brand Cold Glaze Pro System:
US distributor: www.myrestorationsupplies.com/...
UK distributor: sylcreate.com/product-categor...
Sylmasta brand Ultimate Gold/Silver (6 color set): sylmasta.net/product-category...
Iwata Airbrushes and accessories: www.iwata-airbrush.com/
Medea airbrush cleaner: www.iwata-airbrush.com/medea-...
Golden brand acrylic paints and mediums: www.goldenpaints.com/
Rub n' Buff: www.allartsupplies.com/item.p...
Novus polishing compounds: www.novuspolish.com/
Jasco brand Paint and Epoxy remover: www.jasco-help.com/product/pre...
Micro Mark tools, etc.: www.micromark.com/?ns_md=cpc&...
Easy Mold: Silicone Putty (quick mold): www.amazon.com/Silicone-Moldi...
Easy Cast: Clear casting epoxy: www.eti-usa.com/easy-cast
Quick Cast: Polyurethane casting resin: www.tapplastics.com/product/m...
Renaissance: Micro-Crystalline wax polish: www.picreator.co.uk

Опубликовано:

10 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@19gregske55 2 года назад

I have collected Danish porcelain for over 45 years - this repair was a joy to watch, and, I know that it was a labour of love, for you. That figurine would have retailed (before 2008) in the 1,500.⁰⁰ (USD) range. I say this because the research, design and execution of the original speciman at Royal Copenhagen is without parallel. I would ask the viewers to take the time to pause the clip and observe the nuance of colour all over the 'white' area, and also, the where the periphery of the black/brown patch shows a subtley feathered edge - thus mimicking the mixing of white and coloured fur. The RC modeller used to source an actual dog of the breed being designed, and study the movements, the muscles, the skeleton and the favoured poses of the dog. A Royal Copenhagen, Bing & Grøndahl, or a Dahl-Jensen figurine will provide joy for a lifetime. It is wonderful to see your talent. I never object to purchasing a figurine that requires repair, especially a rare or an expensive model. I live in Toronto Ontario Canada, the restorer that is on retainer for The Royal Ontario Museum and The Gardiner Museum of Ceramic performs this level of work for collectors and aficionados alike. Thank you for sharing. GJS

@AimeeAimee444 2 месяца назад

Phenomenal work! So fascinating to see how beautiful the dog came back to form! Thank you! Will be watching your channel as I carefully fix a unique deep red patina bull that fell off the shelf. We were surprised that it was porcelain and thought it was a delicate metal! 😳 Determined to save this bull that has sentimental value. ❤️💯

@katharineskilesdaline4535 3 года назад

I started watching your channel about 2 years ago when searching for Milliput uses. I look forward to your videos, I've learned so much about repairing china, pottery etc. Amazed you don't have more viewers. You're a true master of this art.....

@DAquingil 5 месяцев назад

Wow, you’re terrific. I’ve restored plaster statues for churches, but had no idea porcelain could be repaired in such a flawless manner. I just assumed that once porcelain was broken, the best that could be done was to glue the pieces back together and accept the visible cracks. I’m looking forward to watching more of your work.

@cliffordknowles1296 2 года назад

A big👍🏼👏🏻to your camera operator. Great job thank you.

@tinapope8504 Год назад

Holy Moses! I am so so so astonishingly amazed! Outstanding job!

@marsgitar Год назад

Thanks.

@jmg2018 3 месяца назад

Incredible work!

@triplex86 3 года назад

Another superb video and result. It is so enjoyable watching you work. Thank you.

@curiousfromlt 8 месяцев назад

Martin, I don’t remember in which video you have introduced the files you use for sanding but I must say you saved me so much of frustration as with sanding paper I have only damaged the glaze! After I bought similar files as I saw in your video, I am so happy as it works without damaging the piece ❤ Thank you again!

@susanepstein5874 Год назад

Thanks so much for sharing the whole process-especially the painting.

@pf4773 9 месяцев назад

unbelievable! I'm trying to fix a broken heirloom vase :) Great tips.

@jesshandyside6261 3 года назад

Another fantastic repair! ❤

@marsgitar 3 года назад

Thanks. Glad you like it!

@theceramicrepairstudio 3 года назад

Hi Martin, the finished bulldog looks 👍great.

@marsgitar 3 года назад

Thanks 👍 I've watched some of your videos. Keep up the good work.

@theceramicrepairstudio 3 года назад

@@marsgitar Hi Martin, thanks for your comment, I have great respect for your work.

@suziecreamcheese211 Год назад

What a beautiful piece.

@marsgitar 11 месяцев назад

Many thanks!

@frenchbulldawg 3 года назад

Wow wow beautiful

@christianblomgren244 3 месяца назад

Impressive

@joeswampdawghenry 9 месяцев назад

Well done!!

@georgemartinez1720 3 года назад

Tour a master love your Work Reminds if the Ninks who. Work on the First Books

@georgemartinez1720 3 года назад

That's interesting way to.mix the Putty

@leonwagner2687 2 года назад

Martin, Can you tell what cold glaze you are using?

@cliffordknowles1296 19 дней назад

Please may I ask you about painting two different abutting colours. Do you paint both colours before glazing, or do you paint and glaze the first colour before proceeding to the second colour? If you apply brisket directly over an area you have painted but not glazed will the paint come off with the brisket? Will it leave a hard line along the previous edge of the brisket?

@marsgitar 19 дней назад

usually, I put on a coat of cold glaze before painting the next color, because if I make a mistake it's difficult to wipe off the mistake without taking some of the previous coat of paint with it. (unless the two colors are not near each other). If I'm painting with a latex frisket (mask), I would protect the previous paint coat with cold glaze before applying the frisket. The latex frisket, most of the time, will not pull up the previous coat of paint. But when using an airbrush, the coating can be very thin, especially when fading out to zero, and it's possible you'll rub off some of that paint layer with your fingers. So, it's a good idea to seal each application of a different color with the sealer (cold glaze). Yes, the frisket will leave a hard edge if you paint up to that edge. Be aware that if you use masking tape as your mask, it needs to be "de-tacked" (make it lest sticky by sticking it to your jeans and pulling it off a couple times, using the lint of the fabric to make it lest sticky) before you apply it or you'll pull up the cold glaze and the previous paint layer with it!!

@cliffordknowles1296 19 дней назад

Thank you so very much for this information. This explains so many of the problems I have been having. I’m at the stage of painting the arm and the chest of a Lladro, one white, one grey. I’ve literally been tearing my hair out trying to figure out what was going on. I know you are aware of how difficult it is to mix Lladro greys and whites. Great to see you recently added a tutorial on Milliput. So I’m looking forward to more brilliant tutorials.

@originaldanman 2 месяца назад

Can't you use a Dremel to knock down the put a bit before the file and sand paper?

@marsgitar 2 месяца назад

The files provide better access and positioning than the dremel. Also, the Dremel's sanding mediums would scratch the porcelain.

@conscience-commenter Год назад

Fantastic job putting Humpty Frenchie back together . It would lick your face and wag its corkscrew tail if it was alive as a thank you .

@georgemartinez1720 3 года назад

Do put anything the paper Towel to help wipe off excess hxzel Like acohal

@marsgitar 3 года назад

If I use anything, I use alcohol.

@zaur1377 6 месяцев назад

Hi Martin! As I Can see ColdGlaze Pro2 is suitable for airbrush use. I wonder if a thinner is needed for mixing with Cold Glaze Pro2? Because I previously used different brand ' RUSTINS' Cold Glaze and even diluting it with 10% water, as stated in the instructions, could not achieve the result. Airbrush always clogged, requiring constant cleaning, and the thick mixture did not spray at all.. Can you help me with advise If I buy ColdGlaze Pro2 , what else do I need to buy so I can smoothly use with an airbrush? Thanks .

@marsgitar 6 месяцев назад

Yes, you need to use the thinner that Sylmasta sells for thinning their Cold Glaze Pro 2. I've used Mineral Spirits to clean up airbrushes. It would probably work as a thinner. I dilute my Cold Glaze at a one-to-one ratio, by weight. 50% CG to 50% thinner.

@zaur1377 6 месяцев назад

Thank you!

@cynthiakammann7368 Год назад

A...maa...zing.

@marielmaxine2753 3 года назад

Hi there! Can I consult you on an issue I am havong similar to the one you repaired here....do you do that type of service online?thank you.

@marsgitar 3 года назад

I do some limited consulting on line. I'll help if I can.

@curiousfromlt 11 месяцев назад

Martin, do you have any tips what to do if I damaged glaze while sanding? 😢

@marsgitar 11 месяцев назад

Not much one can do except re-paint and cold-glaze that area. Get yourself some MicroMesh abrasive papers. Look it up online. This won't scratch ceramic glazes. There are abrasive papers made for the doll repair industry as well. You could try those too. Good luck!

@curiousfromlt 11 месяцев назад

@@marsgitar thank you for your answer! I have micro mesh, but I was eager to finish sanding asap so I wasn’t careful enough. I don’t like sanding …at all 😆

@sergioharmmat3048 3 года назад

may i ask you what kind of airbrush do you use for the cold glaze ,

@marsgitar 3 года назад

For Cold Glaze I use a Iwata HP TR-2.

@sergioharmmat3048 3 года назад

@@marsgitar thank you so much ...

@cherylandmomscollectibledo9541 Месяц назад

Would this technique work to attach a porcelain dolls broken off foot?

@marsgitar Месяц назад

Yes.

@cherylandmomscollectibledo9541 Месяц назад

@@marsgitar Thank you!!

@Marusija8 Год назад

👍👍👍👍👍👍👍👍⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️❤️

@frenchbulldawg 3 года назад

Ps That is one expensive little French bulldog statue

@Usernameanonymous1 9 месяцев назад

How much did you charge for that work?

@marsgitar 8 месяцев назад

I don't remember.

@dickmeisterling3924 7 месяцев назад

I really don’t understand the painting process. First a glaze... then paint without masking specific areas. Seems like one paint would creep into areas where it’s not wanted. Regardless, it’s cool to watch.

@marsgitar 7 месяцев назад

On very glossy glazes, I usually put down a coat of cold glaze, then sand it so that there is something that the paint can stick to. If you don't do this, sometimes the paint just beads up on the glossy surface. Some kinds of painting with the airbrush don't need masking. I have many years experience with an airbrush, so I know when I can/can't do this.

@dickmeisterling3924 7 месяцев назад

I hope you are as proud of your work as we are of your talent. Simply fascinating. @@marsgitar