I take the rifle apart inspect it very closely and give it a good cleaning. f you would like to support my channel use one of the links below paypal.me/pool... you can email me at koba49@yahoo.com
I used water with dish soap to remove crap out of stock. Followed by Watco Danish oil. Looks great now. Also. I boiled all metal parts for at least 30 minutes, dry the metal, use steel wool to remove rust and gunk. Scrub bore with bristles and apply gun oil. Last step is apply non detergent motor oil all over the metal parts. Wipe off access results are excellent..
Really enjoying this series you have posted, very interesting and a lot of historical data. Thanks for your effort really enjoyable and informative. Thanks MIKE.
I have a Lee Enfield a little rougher shape. I'm going to do the same thing. Didn't want to do the stripper or sanding thing. I just want a clean version. Kinda disappointed when I received the rifle. (RTI) But I'm a little more satisfied with it now but your simple statement. " I will keep it untill I get a better one" Thanks for the advice.👍
Excellent series. My Moschetto da Cavalleria gets here this Friday, so this will come in handy. I like Murphy's Oil Soap for the wood, followed by a light coat of linseed oil.
Never knew about the olive oil, that is a new one and sure does work, cleans great. Always something I get out of your submissions, this was a good example. I had a mint barrel M38 7.35 BUT NO SA markings. Should have kept it. Again very interesting and some good tips as usual.
I've heard that paint thinner can also take out the old dirt, grease, and nasty stuff in the wood but using a natural substance like olive oil seems more subtle and friendly towards the stock, especially when it matches the condition of the metal.
Hey Koba! You may consider acetone for a cleaning solution for the wood, some people use a combination of acetone and automatic transmission fluid for the metal it is rated a one of the best rust removal mix there is about 50/50. Then apply a coat of Renaissance wax on everything. Stay healthy!
@@mrcee9831 Hi, I do think these rifles (wood) had a finish just cosmoline on the metal and oil on the wood, that is why I suggested it. I would not use acetone on a finished piece of wood.
My M38 looked exactly the same when I got it except the hand grip on the stock was cracked. It's was dinged up pretty bad. I used an iron to pull the dents out and did a stock repair. The ironing had took most of the oil and color out of it. I went back with linseed oil. I still may take it apart and sand it. I Haven't decided yet.
So very grateful for your no nonsense videos. Just like to point out gloves are a great idea when it comes to chemicals. HEXANE, found in brake cleaner, is a neurotoxin. Go with boiled linseed oil as a finish. I get its an Italian carbine but olive oil will go rancid and funky.
If anyone is interested in purchasing from RTI. I just got a carcano rifle from them. honestly im extremely happy with it. It took me an entire day to clean it and im still not done but it looks really good. The only thing is that the rear sight is bent slightly on one of the ears. I should be able to bend it back tho. But besides that and the light surface rust its was in great shape. I made a long tray out of sticks and tin foil to soak the barrel in mineral oil lol
oh yeah the bore looks really good actually although i havent cleaned that entirely yet. and The receiver, barrel and stock match. bolt unnumbered at least i think so. was expecting it to be a mismatch so I didnt check. I didnt check the other parts. Blueing is basically all there i couldnt believe it.
After watching the video the rust one mine was less than the one shown. but there was some light rust in the bolt track and at the very end of the bore. none on the bolt. My m95 did have a fairly rusty bolt and track tbh, but has seemed to clean up pretty well.
Yes, I normally use Ballistol to clean up the wood and metal on filthy guns. It was designed to be used on wood, metal and leather. I usually dilute it with water (about 50/50, it is designed to be diluted and will not cause rust. The water evaporates off and leaves the oil.) and use paper towels to get the dirt off. Then I just use a little linseed oil on a rag to wipe down the stock. (for safety, burn the linseed soaked rag in the bbq, They are highly flammable.)
I know most Carcano bolts are in the white would u say that one is blued it's hard to get info on this because every once in awhile u will see one with a blued bolt .or maybe it's just rusted than oiled to look like it is
thank you sir-i got a 1918 thats in good shape i think i will try too clean it myself -its hard to find ammo to test fire it,or even take a chance shooting it
I have read on a forum that Carcanos have been imported from 2 different places recently. Ethiopia and Italy. Supposedly PW Arms imported a bunch and I saw an imort form that showed many thousands in 6.5 and those are the ones some other companies other than RTI are selling. Thats why RTI is having these "deals"
I don't think so, the description in a lot of these web sites say used by Italian police, that is probably true, they were used by the police at one time, but is that before they were sold to Ethiopia, I do not believe these guns are coming from police storage now in 2020, I believe it is a play on words to help sell off the junk they are getting out of Ethiopia
Mr. Koba, I've seen on another channel where the guy is boiling the metal to convert the rust to iron oxide, then he uses a soft wire wheel at low rpms to card off the converted rust. Have you ever tried this?
I just have one question. How to remove screws that are "frozen and won't loosen? I tried WD40 penetrating oil, and applying heat. Nothing worked. I certainly do not want to damage the screw heads.
John not Saying can’t do it but the difference in boiled linseed oil and True oil etc. they have additives to dry cure and harden. Usually within about 45 days. Olive oil doesn’t just something to think about putting that on your face
Or you two could just use stain and lacquer... That what I did to my sks did a 2 coats of semi and didnt come out to shiny looked semi to flat how a rifle stock should look