RTL SDR Scanner - FULL Bandwidth Recording With WEB UI 

cool, it works. the config file was confusing at the beginning, but once you get the idea, where brackets are required, it is easy to modify and use several different dongles and scan even faster

Nice, I was working on a crude version of this using Gnu Radio, but this is much better, especially the cataloguing of the recordings.

Wow ! Supercool ! Thanks for pointing this out. I will give it a try 🙂

This is awesome! Useful for monitoring repeater use, etc. Cheers! George, M1GEO.

A very very very nice project !! Thank you informing us, thank you Borys. This is for me a woooowwww project !!

Great video. Thanks for sharing!

Looks like there is a MQTT feed built in. This would be a fun integration project with Home Assistant

Nice job and thanks

Good work! BTW, where can I find sdr-monitor sources ? I figured out that this does not work on my pi4, now trying to build this for pi, but can not find the sdr-monitor sources

For those dedicated to RXing Air Traffic, there is a new device now available from ML&S. I can't remember the name of it, other than its Bright Red/Orange in colour, & comes in 2 versions. It gives every detail that you could ever want, but I don't know if it RX's voice.

Gutted it doesn’t have AM working as the airband thing would be huge!! 😊

Got this running today in the newest Ubuntu via VMWare. I guess I need a bit of a handhold with the step sizes. I'm confused as to why I can't do a search from 482.000 MHz to 484.000 MHz with a step size of 12.5 kHz. I think I understand that it is the math that is not adding up to the sample rate but I'm scratching my head as to how to overcome that. Works fine from 146 to 148 MHz with a step size of 1 kHz. Pretty cool though, and not sure how much I'd really use it but it was fun to learn how to install it. Just need a few tweaks I guess to understand the steps. Thanks for the video!

Bummer about the AM, ATC transmissions are exactly what I would have used such a thing for.

How about digital modulation, is it able to record DMR?

Looks awesome! What antenna would You recommend to do that stuff?

The big boys do a 50Mhz window in 0 to 10Ghz range , used in the signals intelligence community terrabytes per hour stored went to a trade show with some very slick R&S gear om show

Is it possible to add multiple RTL-SDR and record all the frequency at the same time ?

I already do something similar with SDRTrunk and Trunking Recorder.

RTL-SDR QuickStart guide driver like zag something for windows ✌️

How could I use SDR F/D to have TV channels? Any idea?

I want something like this for the rx888 MK2....

Super cool! I'm having issues though. It runs, and I see alot of entries in the "spectograms" section. I dont see anything in the "Transmissions" section though. I know there is traffic within the frequencies I'm monitoring. Any ideas? I'm using a hackrf.

I tried but recording quality was very low, there is any recommended setting?

Does this ACTUALLY record all simultaneous transmissions within the set bandwidth, or does it just lock on to each transmission within that set bandwidth and record it? I.e. if there are two, three, four, etc simultaneous transmissions happening within the set bandwidth, will it capture and record them all simultaneously, or just the first one that transmitted and then jump to the next when that first transmission ends?

This is exactly a thing I am looking for. Will it run on Raspberry please?

Will it record 433 mhz transmissions?

Have AM and SSB been supported?

It doesn't seem to work on a Raspberry Pi out of the box. Luckily I have a Linux server lying around so I got it running and it works fine! Not too heavy on the resources it seems, although that may depend on the settings and traffic. Hope AM support comes soon.

How could you install the scanning feature a Android phone

Hi. Work's with rsp2? Or not

Would this work with Nooelec SDRs or RTL-SDR exclusively?

will it work with wsl? thx

Can i run this on a Raspberry Pi?

source code isn't published yet, cant build from source. Forced to used docker. :(

Has anyone tried using multiple SDRs to record different bands at the same time?

Is there a scripting ability for these dongles to scan from 50MHz to 1.6GHz to detect transmission activities?

Does this decode P25 Phase 2?

Should led with no am no ssb

what about if you have a Android phone

It would have been nice to have some radio gurus tearing apart the signals to and from these damn balloons over the US right now......

I get so much noise when a rtl sdr is on a usb hub

interesting, a few stations recording 24 hours could potentially triangulate nuisance stations, mostly callsign cloners and keyer's ... be warned contest saboteurs❤❤👍👍

I find it rather strange that someone would put in all the effort to code a scanner app but then ignores the existance of AM.

Could this be used with a raspberry pi?

RROR: The Compose file './docker-compose.yml' is invalid because: Unsupported config option for volumes: 'monitor_data' Unsupported config option for services: 'sdr-scanner' does anyone know why I am getting this error? { "scanner_frequencies_ranges": [ { "device_serial": "auto", "ranges": [ { "start": 433000000, "stop": 43400000, "sample_rate": 20000 } ] } ], "ignored_frequencies": [], "devices": { "rtl_sdr": { "ppm_error": 0, "tuner_gain": 0.0, "offset": 0 } }, "recording": { "max_noise_time_ms": 500, "min_time_ms": 2000, "min_sample_rate": 16000 }, "detection": { "frequency_grouping_size": 10000, "frequency_range_scanning_time_ms": 64, "noise_learning_time_seconds": 30, "noise_detection_margin": 10, "torn_transmission_learning_time_seconds": 60 }, "output": { "logs": "sdr/logs", "file_log_level": "info", "console_log_level": "info" }, "cores": 4, "memory_limit_mb": 0, "mqtt": { "hostname": "sdr-broker", "port": 1883, "username": "admin", "password": "password" } }