No video :(

RUBBER MEETS ROAD! ★ & Building the Under Seat Tray with A Key Lock - EP.57

Подписаться 197 тыс.

Просмотров 68 тыс.

50% 1

After 3 years of building the Cb750 documenting the journey on RU-vid every step of the way to share with you, It’s now time for a quick shakedown ride! also building a removable electrics tray under the seat with a key lock.
SHOP - www.caferacerg...
You may need to watch the complete instructions inside of this video to get a complete overview of what you intend to buy. If you like this design you can use it on any type of motorcycle you prefer by making first all the required modifications at your own risk.
Cafe Racer Electronics Tray
#UnderSeatTray #CafeRacerUnderSeatTray #CafeRacerGarage
Parts and tools I use: www.amazon.com...
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for RU-vidrs
💥💥Want to see exclusive content, behind the scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts, and much more!
/ caferacergarage
=====================================================
For all commercial inquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ 01. Making a Custom CHAIN GUARD That Becomes An IMPRESSIVE FEATURE! Step-by-Step | Ep56
• Making a Custom CHAIN ...
★ 02. Making a CUSTOM Motorcycle SEAT LATCH + [100k subs GIVEAWAY] Ep.55
• Making a CUSTOM Motorc...
★ 03. HALLOWEEN GAS BOTTLE PUMPKIN PROJECT TimeLapse | DIY Jack O Lantern
• I PLASMA CUT A GAS TAN...
★ 04. WET BLASTING ★ VAPOUR BLASTER - Workshop Upgrades - Sandblasting
• IS THAT RAW METAL OR P...
★ 05. DIY Motorcycle Brackets | How To Build A Cafe Racer | TIME LAPSE
• DIY Motorcycle Bracket...
★ 06. Why Just Ride A Motorcycle - Timelapse Fabrication | Onewheel & Exway Flex Riot E-board
• Why Just Ride A Motorc...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe To Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challenge) SUBSCRIBE to follow my future builds, I'm based in Australia.
=====================================================

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@TreyLefevre 3 года назад

So I just binge watched the entire CB 750 playlist. I got a Suzuki Gs750 two weeks ago that's been converted into a brat/scrambler and you have given me so many ideas of things I can do. In addition, the confidence that you approach the work with has helped me be confident in tearing into my bike.

@CafeRacerGarage 3 года назад

This is awesome mate, so glad you are getting started. 😊

@ampuia 3 года назад

TBH, this has got to be one of the best, if not the best looking cafe racers I've ever seen. I'm serious. I'm so in love with this build. You got an additional sub. Keep up the awesome work.

@CafeRacerGarage 3 года назад

Wow thank you so much mate

@waynemartinez8620 3 года назад

DUDE! This build is what got me hooked on your videos and finally seeing it on the road was very cool! Keep up the good work my friend!

@CafeRacerGarage 3 года назад

That’s amazing dude 😊👍 Love comments like this. I may inspire you but you also don’t inspire me

@AlanDavid1955 3 года назад

THANKS DAN !!!

@axelzanelli6475 3 года назад

Another Great video Dan! I appreciate your sharing tips and mistakes which we all make. Look forward to seeing many more videos!

@CafeRacerGarage 3 года назад

Thank you mate, I try and show as much as I can and cut out the boring bits if you know what I mean :)

@alangerrard3548 Год назад

Great job mate. I'm building an X's 650 Yamaha at the moment. It's great fun. Keeps me and the tools busy. Cheers Alan.

@Sleepa84 3 года назад

Awesome work Dan, CB sounds great. I've watched all your videos in the last few months and the tips and inspiration keeps me going on my build. Its really cool to see a local builder as well (I'm south east QLD too). Looking forward to seeing this finished.

@CafeRacerGarage 3 года назад

Another local Aussie :) Thanks mate, yes it’s been a journey that’s for sure

@Jarrrow-1 3 года назад

Dan, pure pleasure to watch your work! CB sound AWESOME!

@CafeRacerGarage 3 года назад

Thank you so much mate, It's fun to share my ups and downs with you :)

@RecoveryRoomRestorations 3 года назад

I hear you on the tightening bolts issue,...I've done that myself. Then I took a lesson from factory builds. I dab water soluble paint on what has been torqued or tightened to spec. its then easy to see what you might have missed. Great build, and I'm anxious to get my CB out soon!

@CafeRacerGarage 3 года назад

Great idea 😊

@lewicypher1912 2 года назад

trying to get my old Goose going. winter =seat pan, m unit and wiring, fingers x'd. thanks for inspo.

@johnDukemaster 3 года назад

Aaah Bacho! The inventor of the adjustable spanner. (So I'm told!) Swedish firm anyway. High quality indeed. Tools for a lifetime and more. I like those small things you add, like the metal piece turning into four when hitting the blade. Nice touch!

@CafeRacerGarage 3 года назад

Haha thank you mate. I like that you always find time to notice the small details i put in my videos and comment about them. It’s fun being creative like that when I think of things while working away:) Have a great day John 😊

@johnDukemaster 3 года назад

@@CafeRacerGarage Thanks Dan, you too!

@TheFarmertim 3 года назад

This build is so sick! Great tip about building the bike twice and getting everything right before powder coat. I thought I was nearly ready for powder coat but maybe I need to get my elecs sorted first.

@CafeRacerGarage 3 года назад

People think because bikes are small that they are fast to build and in some ways they are but still lots to do if you want it to be done correctly and look amazing when its finished

@gordonhenagar6652 3 года назад

Loved watching you debugging and improving your Honda 750 four. Those engines sound great, good job on the video.

@CafeRacerGarage 3 года назад

Thank you mate

@Thewatson77 3 года назад

Great video again Dan 👍🏼 The look on your face finally getting that first tide in was priceless 🙌🏻 I can’t wait to get my first ride in. I’m right behind ya mate!! Keep on inspiring us!!

@CafeRacerGarage 3 года назад

It was seriously awesome 😎. Hope yours goes just as well

@alanbuller3371 3 года назад

Awesome to see you out on the bike!

@CafeRacerGarage 3 года назад

Thank you mate, I thought the exact same thing lol 😂

@JSAFIXIT 3 года назад

I'm going to be watching a lot of your videos I think. I just picked up a 1980 cb750. First goal is to get all the mechanicals 100%, then the fun stuff lol.

@davidrussell407 2 года назад

Hey Dan, looks and sounds amazing, I need to pop by sometime and check it out 👌

@DennisTang 3 года назад

I have the swag portable bandsaw table as well. After one blade snapping i quickly invested in a full face shield. Great job on the bike!

@CafeRacerGarage 3 года назад

Smart man, I also use a full face shield a lot.

@scottdog2593 3 года назад

Can't believe you've built this so quickly Dan, It only rolled off the truck in February!! Sounding almost as mean as it looks, just needs to get the firing order sorted. Keeping it real by owning and sharing your mistakes Dan. Really looking forward to seeing and hearing this Honda on the road mate

@CafeRacerGarage 3 года назад

I started this in October 2017 and sharing the journey on RU-vid every step of the way. Filming everything takes 4 times longer to do everything as you need to set camera up to get the right angles, adjust lighting, stop and explain the process and sometimes do multiple takes, plus the 8hours of editing on top. It’s a big process but I love it, especially when I get so many awesome comments and helping so many people along the way

@jaredsimpson2184 3 года назад

Wow! The CB sounds like a beast! Love it!

@CafeRacerGarage 3 года назад

Thank you mate, maybe a tad loud lol 😆

@coma3550 3 года назад

Love your work Dan, your attention to detail is awesome.

@CafeRacerGarage 3 года назад

Thank you mate. I sometimes frustrate myself due to being a little bit fussy, but in the end its all worth it

@spudfurfy 3 года назад

Great video dude id say it was awesome to get a little spin out on it

@CafeRacerGarage 3 года назад

3 years of building in my spare time and documenting the journey To finally get to ride it for the first time was amazing

@jamesabbott1309 3 года назад

I love it! Good work, Dan!

@CafeRacerGarage 3 года назад

Thank you James :)

@rebuildranch1225 3 года назад

Hey Dan, great job! I have been building aircraft for years and we use a simple wood blade in the bandsaw for aluminum. They are course enough they don’t clog and cut very well.

@CafeRacerGarage 3 года назад

Thank you mate 👍 great advice

@tortron 3 года назад

@@CafeRacerGarage some soap on your file when shaping it too will keep the file from clogging up.

@BareBonesMotorcycles 3 года назад

Really nice tidy job that, nice finish and professional look as always. You are so right right about shake down rides, the first bike i ever built i took out for is maiden voayage, and realised that i hadnt dont the clamp up on the filter tight enough, in the 2 mile ride i did, it fell off and i found it luckily on the way home. Double check everything now. Nothing wrong with nut and bolt paranoia.

@CafeRacerGarage 3 года назад

That was the lucky one those good pod filter’s are not exactly that cheap. I definitely have bolt paranoia lol 😂

@garya3056 3 года назад

That was awesome to see her on the road, Dan! She sounds pretty darn good even with needing a final tune... great video, Mate! 🏍👍🏍

@CafeRacerGarage 3 года назад

Thank you mate, I was wondering how to do a join between the 2 exhaust directly under the motor but this may not even be needed

@garya3056 3 года назад

@@CafeRacerGarage perhaps not... depends on personal preference if she’s performing ok with no flat spots or sputters. BTW, have you ever thought of getting your bike(s) on a dyno? 👍

@CafeRacerGarage 3 года назад

@@garya3056 the last bike was a budget build so I’m not to worried about spending to much on that it’s finished. maybe the cb750 if I rebuilt it 🤔

@garya3056 3 года назад

@@CafeRacerGarage gotcha! 😎

@moto_dras 3 года назад

Particularly nice video this one, lots to see being done and some fun camera work. Nice work.

@YaelDion 3 года назад

Top notch video, mate - always inspiring.

@CafeRacerGarage 3 года назад

Thank you Yael, how are those carbs coming along? Did you get the plating done?

@JakeHollibone 3 года назад

Amazing workmanship as usual

@CafeRacerGarage 3 года назад

Tank you mate :)

@tasosan 3 года назад

The bike looks lovely mate!

@nenadvrca7730 3 года назад

"Needs a tuneup!".. Sounds good to me!!

@StraightLineCycles 3 года назад

Definitely a good motivator

@CafeRacerGarage 3 года назад

You are 100% right :)

@Andreslge 3 года назад

Just beatiful 😍

@zardportugal 3 года назад

Brilliant.

@bridget4982 2 года назад

Love your work man

@wobblebike2442 3 года назад

Great job.....as always👍

@CafeRacerGarage 3 года назад

Thank you mate, this was a fun video for me too :)

@SwedenAirhead 3 года назад

Looks and sounds amasing Dan! I have been waiting for this ride almost as long as you 😊 Lucky about the loose chain othervise you might just keept drivning until the gas ran out and been needing to push it back 😎

@CafeRacerGarage 3 года назад

Thank you mate and yes you are right.

@OoJoeShowoO 3 года назад

Sounds good!! 💪💪

@CafeRacerGarage 3 года назад

And loud lol 😂 maybe to loud. Thank you mate

@TheYakkis 3 года назад

Been waiting for this one !

@CafeRacerGarage 3 года назад

I don't think you are alone :)

@TheYakkis 3 года назад

@@CafeRacerGarage thank you !

@RedlineAlex 3 года назад

Thank you, it was interesting👍

@921CustomWorks 3 года назад

information.. thank you 😊

@garyyorke1080 3 года назад

Wow Dan she moves under her own steam ..At last ..sounds great , always a pleasure watching you fab something as you say that under tray now looks finished . Sweet trick with the spring so those that didn't know the easy route to remove one now do . As you say you logically build the bike twice , basic mock up then the real build after paint and finish . Do you have any plans on a rack like the CX so if you do head out on the CB for a longer run you got some luggage space .great brekkie vid as always . Thanks Oh have you found the other lock yet !!

@CafeRacerGarage 3 года назад

Yes I found the other lock lol 😂 No rack planed for this one! Just because it’s not planned doesn’t mean I won’t make one lol. I need to install the taillight in the hump, finish the upholstery and fit a numberplate to this bike 🏍 so those are some upcoming video’s for your breakfasts 😁

@benjaminarnold1041 3 года назад

🖐

@antwolff1426 3 года назад

Bike looks and sounds great on the road mate. Have you synced the carbs yet? Also you are doing all the things to need to do to my bike but i haven't had the motivation and time to do it. Unfortunately (fortunately) my bike is rideable so I'd prefer to be riding than pulling it apart. But at least I have videos to help me tidy it up one day.

@CafeRacerGarage 3 года назад

It almost sounds like you could benefit from a second bike that you can tinker with. Something cheap but fun

@kenjlee Год назад

It happened to me once my bike stalled on the track for unknown reason. It worked after sitting for a few minutes. It keep happening over and over until I found out my battery terminal bolts was loose by vibration.

@jaydekay2613 3 года назад

Great work Dan, nice job on an iconic Honda. I like how you explain simply some of the processes you go through. I’m curious though what is the preoccupation with brown seats on cafe racers?

@user-tb6hi9ei1f 3 года назад

I Love You I Dol❤️️🇰🇭

@xpd44.outfitters 17 дней назад

Where did you get the seat latch system? Excellent series! Cheers

@elifreeland5869 3 года назад

This has nothing to do with the beautiful bike you’ve made but is your watch automatic?

@CafeRacerGarage 3 года назад

It’s a Garmin Fenix 5x

@m.tortul 3 года назад

Hey dude hi from Argentina, the 750 looks better everyday but be careful with the seat lock, is very exposed to dirt there, it can get stuck.

@CafeRacerGarage 3 года назад

Thank you mate and yes it is a little exposed but it does have a dust cover over the key part and this will only be ridden in good weather and cleaned up after each use as It will be on display in my lounge room :)

@luiginico83 Год назад

Bellissimo lavoro, che avantreno hai montato?

@davesimpson85 3 года назад

Dan I was wondering if you guys had developed and built some bar controls yet? I'm after a set for my virago hardtail chop and I'd like to purchase a set of yours if they're available yet? The cb sounds like an absolute beast as well. My favourite of all your builds so far. Couldn't wait for you to finish it.

@CafeRacerGarage 3 года назад

They should be ready early in 2021 :)

@HeyHeyItsJayTay 3 года назад

"excuse the pun" - and......*like*.

@CafeRacerGarage 3 года назад

You noticed that haha 😆 good pick up mate.

@dancooper4016 3 года назад

The CB750 is looking great!! Awesome attention to detail. What are you running for rear shocks?

@CafeRacerGarage 3 года назад

Thank you mate, tec shocks but I may change them

@oettger 3 года назад

Is this satin finish on the Aluminium done with your vapor thing? Looks amazing! Wanna do my mt09/fz09 swingarm with it? 🤔 Happy to see this bike rollin „again“ 👍🏼 Your neighbors are going to kill you if you stick with that exhaust 😂😂

@CafeRacerGarage 3 года назад

Yes my tank was done in the paper blossom cabinet it’s come up amazing with that satin finish, Where are you located? I can definitely do your swingarm for you. Shoot me an email you’ll find my email in the description of this video. My neighbours are pretty awesome as they know I’m very respectful, Some of them know how long I’ve been working on this bike so a little noise in the middle of the day wasn’t going to worry them to much. I hope 🤞 🤞

@oettger 3 года назад

@@CafeRacerGarage its allways good to have great neighbors 🥳 Thanks for that offer ☺️ I‘m located in Germany, shipping costs would be around 100€, if I stay below the 20kg limit. Don‘t know if it’s worth it

@FUELFIREGARAGE 3 года назад

You got a tig weld that bandsaw blade back together then you got a spare

@CafeRacerGarage 3 года назад

You are 100 % right 👍

@gnemois 3 года назад

Hi there mate! Thanks for the great videos, I wonder, should we or should we not use cutting oil when we're using bandsaw? Greetings from Indonesia! Cheers!

@CafeRacerGarage 3 года назад

If you use the correct blade you don't use oil, Oil will make you run into more issues like blade slipping and build-up of metal on the blade getting stuck on the drums

@assessor1276 3 года назад

Godd job Dan. QUESTION: when you weld on the bike frame, how do you protect the electrical system (ECU, alternator, voltage regulator etc.)?

@CafeRacerGarage 3 года назад

I don’t worry about them normally as the battery is always disconnected if it was a newer bike I would worry. It it breaks I will replace it no worries 😉

@assessor1276 3 года назад

Hmmmm.....OK then, what you do on a newer bike?

@user-wg6xc2qi5s Год назад

Nice retro rebuild don't like the open rear cafe style

@HeyHeyItsJayTay 3 года назад

hold up....a cafe racer keychain fob? i didn't see this on your store....

@CafeRacerGarage 3 года назад

Do you like that? I made this just as a bit of fun for myself. Didn't know anyone would want one

@HeyHeyItsJayTay 3 года назад

@@CafeRacerGarage I got my shirt, so now i need a matching keychain fob....just saying....

@CafeRacerGarage 3 года назад

@@HeyHeyItsJayTay did you tag me on Instagram with your shirt picture?

@HeyHeyItsJayTay 3 года назад

@@CafeRacerGarage Nah, I don't really do the insta-selfies. 🙂

@halfinger912 3 года назад

Can it be done to a suzuki bandit 400? With its trellis frame?

@CafeRacerGarage 3 года назад

I'm not familiar with that frame but you are welcome to use any of my design ideas on your bike :)

@halfinger912 3 года назад

@@CafeRacerGarage ahh, much apreciated

@ballerblocks 2 года назад

do these bikes ever get ridden, no video of its use.

@CafeRacerGarage 2 года назад

Hey mate, I am a bike builder so occasionally I get out to ride them. In fact I’m just about to plan a Moto camping trip so you’ll see a video of me riding in that one for sure :) The CB 750 in this video is still under construction but extremely close to being finished