You're video making has become much better. Impressive. I think I would have started the video in the daylight and then said "this is what happened yesterday". A lot of people will probably stop watching the video in the first minute if it starts with poor lighting, but you can add it in after in editing. I know you didn't ask for advice so I apologize if you don't care. 8:00 wow... yes, that is a big mess. It must not be getting very hot in that area. I'm having the same issue... super hot in some spots, melting stuff and in other spots, not hot enough. 12:20 ... I believe that very hard carbon like that is from when it runs very cold. 17:25 haha... I know that feeling. You wear gloves to keep your hands clean, but then your gloves become do dirty that you can't touch anything... Saw = Universal heater tool. Great video. Thanks for sharing.
Sound volume is a little low. I have to turn it up all the way to hear what you are saying. The content is great! Someone who is actually trying to solve the waste oil burning issue. I subbed.
I've done a chamber-cut mod as you did in your previous video, applied new mesh (old one was completely clogged). I've noticed, that 10-15 minutes after start I have a leak from intake side as you do, so I decided to glue the chamber with high temperature glue, based on silicate (for the chimney/car exhaust purposes). So far I had a full 3h run with 50/50 WMO/diesel blend that I used to run previously - without any problems, no leaks. I'm running diesel heater to heat up 18m2 garage, starting from 3 or 4 degrees celsius, so I run at max power (5.5 Hz and 5k rpm max) with exhaust heat recovery also. Going to perform some tests and longer burns, we'll see the results
hhanks for telling me at the moment I am trying something new. I redesigned the burn chamber and so far I have been able to run it for 20 hours without a problem. we will see how long it lasts
@@hobbychannelgermany5856 you're running lower powers than me, try to check the total quantity of oil burned between maintenance, I'm going to do so, so we can compare the results. Do you run blend or pure WMO?
mit dem harten zeug hab ich auch bekanntschaften gemacht. habs nichtmal raus bekommen 😅 hab die heizung dann nur mit diesel laufen lassen. so ca 6 stunden. das Harte zeug ist dann zu diesem weißen crunch zeug geworden und lies sich super entfernen.
Moin zu dem stand ja aber ich bin gerade dran das deutlich zu strecken dafür muss aber die brennkammer geschweißt werden. bis jetzt läuft sie seit 28h ohne probleme ich werde wenn sie eine fehlermeldung bringt wieder ein viedeo dazu machen aber ich habe große hoffnung dass es jetzt endlich längwefristig funktioniert.