Rusty Saw Set Pliers Restoration 

Hi Everyone ! A shorter video than we usually do but this wrench is quite uncommon ! Hope you'll like it :-)

I like that you always show the function after the restoration. It makes me appreciate your work when I know how it will be used.

I always admire how you never buy replacement parts but always choose to fabricate new ones. The sign of real craftsmen.

Once again, some kitty timestamps: 3:03 Avril on duty, checking the rust removal 5:50 I think there's a 'meow' in the background around here 10:39 Coming in for a sniff, the orange fluff is back 10:59 And once more Thanks for the video, it's awesome! May God bless you

Seeing screws being made for the first time was the coolest thing I've ever seen in my life.

Your assistant who was doing a quality control inspection seemed to be very thorough! Great job, Avril! 🐈

Watching you work is so therapeutic. I love that you take so much care and show such attention to old tools

Jeez! Both knurl knobs snapped off! And you refabricated both of them! What a lot of work! Came out looking great though. Nice job man!

1000 points for your exceedingly inventive knurling and milling techniques ;-)

Really liked the restoration of this specialty tool, and thanks for the demo at the end to explain what it is used for.

I love all your fabrication work-arounds for when you don't own a metal lathe.

I really like this restoration, and the way you made the marks with a file and a vise was very creative. Keep It up!

Very interesting tool! Very good work! I am a big fan of yours! keep it up...

I have never seen this tool in use before. Great video!

Thank you! Seeing screws made without the use of highly expensive machinery was awesome!

Impressive persistence for nightmare bolts and screws. Most impressive was turning the thumb screw on the drill press and then using files and a vice to create the knurls...Bravo for ingenuity and quality of restoration. Love the filigree on old tools like this that were built by craftsmen and women with pride of workmanship. Thanks always for your great restorations and hard work! Hat Tip, ~PJ

5:20 Aha! Your secret is out! Such excellent work can only be achieved with your three hands! (and one cat of course!)

🐼 Big Bear Hugs from a 67 yr old grandma in Kirby, Texas, USA 🐼

Awesome how you used basic tools to re-make the thumb screw!

Руки рабочего человека. Уважение!

Накатку двумя напильниками? Браво! 👏👏 беру на заметку.

Avril always checking that everything is being done the right way.😃

I had no idea what that was until you used it on the saw. Very impressive restoration. You do such excellent work. Avril thinks you do purrfect work. I agree.

that has to be the most unique pliers I've ever seen, very nicely done.

Who needs a lathe when you can make it on a drill press! Great work with cool results. Thank you for the nice video of the transformation!!

Nice work with making a new one! And do you even need to ask about restoring the saw? Of course!

Glad you did the test,I really wanted to see how it works 👍🏻🍀

Who the hell is leaving a thumbs down!? Love these videos...

The job you did making the finger screw and knurling it with the vise and files was brilliant. Great restoration.

Вы-инструментальный супер-хирург! Мне бы про стряпню смотреть, а на Ваши видео-запала! Вы мне напоминаете моего папу:золотые руки были у него, всё умел делать!

Lol, I never seen that tool before. I appreciate you showing how it is used, well done!

RESPECT how you machined parts on the drill press. Inspiring.

Gran trabajo !! preciosa y muy útil herramienta 🎄👌😃👍

If you put it in Rust remover first, you avoid many of the screws breaking. Evapo-Rust is works amazing.

Amazing what you did with some files and a drill press. That is almost lathe quality.

Avril was pleased with the work you did on this !

Neat idea gnarling that screw with the files and vice. HI AVRIL!

5:30 never saw that before. Somehow a cool idea.

Great job! amazing resolution without a lathe! You're an artesan, and the world is running out of them.

It's always nice to see Avril. My cats are also interested in my projects.

Well, respect for the way you make those bolts, I thought those pliers will not work anymore, great restoration.

your ingenuity is never ending. Looks like you need a lathe.

Great job bringing this wrench back to fantastic working conditions. I love how you made the screws also. You are a true craftsman.

Absolutely beautiful work milling the parts. Truly amazed 😮🎉

Thought it was really cool how you added the knurling back to the knob you made. I wouldn't have thought of doing it that way.

The lengths you go to to make screws always amazes me. No lathe? no problem! Really cool tool and really nice restoration!

Very nice restoration

I like watching rusty Tool restorations. Watching you use files for knurling was a stroke of genius.

Watching you make the knurled screw alone was worth it. Many thanks for showing us how the pliers functioned.

That's some pretty good "alternative knurling" you did there. Great vid!

Making the set screw from a used bolt, a file and a drill press. Mind-blowing...

Okay, fabricating that knurled screw has blown my mind. Bravo!

Drill press for a lathe and a vice with files for knurking. Just awesome. Love it.

Такой штуковины я раньше не встречал))

Дед"золотые руки", винт с насечками на головке делает при помощи ржавого напильника. Браво !

Great job restoring the old saw set. Lot of work fabricating and replacing the broken screws. I like your knurling jig. Excellent job!

Making the knurled screw without a metal lathe, amazing! I am going to try this sometime!

Yes!! Restore the rip saw. I collect saws for use in my business as a wood turner a have a few saw sets but, not like yours. Great video 👌👌.

Some masterly creative bodging there. Good stuff, very impressive

You don’t have a lath ,no problem just make the screws And the neural with a file.Excellent work dude.

I really liked the way you used a drill press to make the thumb screw; especially the part where you used two files and a vise to knurl it. That was very resourceful and creative. Outstanding! 😀

No lathe, no problem! That's inventive.

Hi Avril and master watched this video at 4:00 a.m. this morning good job

Fantastic fabrication. Ingenious use of the files for knurling. Also your orange apprentice is very supportive. Wonderful content.

Wow! Interesting metal working techniques.

man i love ur cat. ur restorations are 1000x better bc of her

that's what it was for! I had one at home and I didn't know what it was for . very good job

The handmade screws to replace the broken ones was very well done. Doing that by hand is very difficult.

oh my goodness! watching your papa file down that giant bolt into something slim and beautiful shows just how much skill and patience that man has!!! masterful

my father had this tools..he used everytime he sharpen saws.... love your restoration...

shaping metal in a drill press with files is a genius move.

The knurling trick with the files was awesome! That was a first for me. : )

Very creative to use the drill as a makeshift lathe! Turned out relly good!

this is the best restoration channel out there. there's something in your videos that make me feel calm and somehow happy... Keep it up 😁

Yes,It's my first time when I see this tool,and you did a great job with his restoration !!! 👍👍👍🎆🎁✨❤🎆🎉❤🎄🎉✨

Hand-knurling with a vise and 2 files?? Now THAT'S impressive!

Avril is perfect as always, she's such a pretty and cute) Can't find any words)

Truly remarkable way to build a screw with a cap ... inspired !!!!!! And wow.

Great work. I liked working with simple tools depending mostly on your hands. Keep on

Excelente restauração! 👏👏

Otro gran ejemplo de su habilidad en la restauracion, excelente resultado obtenido en estos alicates depara doblar los dientes de la sierra, mis respetos y saludos desde Venezuela.👍👍👍

very nice work, I didn't understand what is the use of the object untill you used it on the blade! :-)

Real great workman ship and cool ideas to produce the new "screws"

Купил такую же , на блошином рынке , лет 10 назад . Правда в хорошем состоянии . Лучше приспособления для разведения зубьев ножовки не встречал .

A brilliant solution to the broken screws. Overall, excellent restoration.

Such delicate work. I'm not sure how to word it, but I especially liked when you re-notched the increments. Nicely done.

Bigger fan of the objects you get that have gears or require sandblasting, but I always love watching you work. Great job!

You Sir do amazing work and make it look so easy! You deserve all the likes and your cat is super awesome.

Awesome resto. must have had that sinking feeling when all the bolds broke off.

I didn't even know that type of tool existed. Thanks for sharing.

I love the animal's head in the jaws' design! How fun.

За обкатку отдельный лайк

I was always interested in how the saw set is done, how and at what angle the saw teeth are set! Because sharpening is not difficult! It turns out there is a tool! Thank you very much for "Bringing the instrument back to life" !!!!!!!👍👍👍😊🎄

Never seen knurling done like that with metal files, turned out well!

I love the detail of mark the head of the bolt with the files.

This was like the Tysy way of making screws 😆🤣 but hey it worked and the result was brilliant!

Me dio muchísimo coraje que se rompieran los tornillos al principio del video, pero mas me alegre, cuando lo habéis solucionado. Como siempre me sorprendéis muchísimo. Felices Fiestas compañeros !!!

Great restoration! Second life for old tool is cool!!!😀

I am always fascinated by and enjoy your craftsmanship and creativity. Thank you.

A grade 10 restoration, bravo, I was very satisfied at the end. ❤️👌💯