RUT TO THE RESCUE! Pond & Ditch Cutting With The Rut Brush Slayer! 

A little tip for efficiency I learned a long time ago- when I'm cutting around ponds like this one, I'll track down the entire length cutting the top in one pass, then angle the cutter and track back the other way to cut the slope. I'm much quicker when I do that than cutting the top and slope to the waterline in one pass. Of course, that's just me, but it really helped me time-wise.

The pond looked great. I just couldn't listen to that machine scream like it was in pain the whole time. Thank u for the video.

Great job on the pond looks fantastic

That's a pretty little pond - now that it's trimmed - great job

Might ought tie up them hydro hoses before you rip em off!

Looks like a retention pond. Great job as usual by the way. 👍👍

Man that thing sound like it’s ready for a overhaul

I hope you enjoyed your weekend meeting your new nephews!!! Congratulations!!!

Great. Job. Deven

Trying to determine which way this machine shoots out the most cuttings. So doesn’t clutter up the pond more than necessary. Maybe should sweep in one direction.?

Im lmpressed with this cutter/ mulcher

Nice to hear the difference between the mower and mulcher....thanks..

That cutter sounded like it was struggling to spin or the machine was struggling to run that cutter.

Nice job and video like always

Awesome 👍👍👍

SALUDOS DIGIY 4 ANOTHER GREAT VIDEO AS ALWAYS, G.B.Y. TOO BAD THE RAIN DIDN'T LET YOU TO FINISH THE JOB.

Good job brother, it’s a lot better. I’d like to see the rut on the U-55 and the XCT-5 on the Tak

awesome video

Let's have some fun as usual!🤗🇺🇸👍

Muy buen video saludos abrazo grande desde Argentina 👍🤗

Works well

Not sure why you wouldn't cut from the waters edge in every time and limit the mess in the pond.

I seen people with brush hogs in my area along the ditch lines like that nail sector blade in one place and then drive the machine 50 or 60 yards and then back it up

It seems that it would be faster to just set the angle of the cutter to that of the pond bank and just drive forward along the bank.

Is that machine supposed to make that grinding noise? Sounds like the blade is not fitting correct.

Great video. What exactly is that pond used for? Is that for stormwater runoff? I live in California so I have no idea what ponds in the south are used to for.

Boa tarde , muito boa essa máquina cortadeira , so que tem ter um limitador do corte , para não pegar o chão , como está acontecendo nesse trabalho . Outra coisa ,o corte tem que ser da esquerda para direita , para a grama não cair no lago . Parabéns pelo invento 🇧🇷🇧🇷🇧🇷👍

NEED FULL ENGINE POWER AN ANGLE BRUSH CUTTER WHERE GET DOWN TO THE SIDE BANK MORE

How much time to do the pond? Are you paid by hour,machine hour or so much per job?

Amen~!

Is the spooling sound because you are toggling the cutter off and on? Does the machine not have constant flow capability. It would suck to have to hold the button down the whole time.

Exelente el Diseño ayudaría a muchos con las malezas que no pueden sacar !! Te recomiendo si querés contactarte con este hombre que está restaurando una casa de 140 años y vaya que necesita una de estas !! Dios te siga bendiciendo y para muchos más abrazo grande !!

👍👍

See if you can construct a small umbrella that would attached to your tripod that would give your camera some shade

Trying to decide on a mini excavator or a mini track loader. I have a creek bank that needs cutting

So you have the MTL and you used this machine. Tried to order a MTL but they don’t answer. So we are looking at the Tree Slayer by rut with mulching blades. What do you think of quality

man that grew up fast

*How much would it cost to rent one of these for a day? Or how much to pay someone to come out to do an 8 Hour Job?* We definitely need to do this on our property, especially with Fire Season at hand!

How is this cutter on blackberry briars?

This bank that you're cutting down at about 37 minutes, looks intentional. Maybe someone pushed it up there so water wouldn't flood that field?

I would cut left to right to keep the grass out of the pond. But whoever cares about fishermen?

I THINK U NEED USE " DRUM MULCHER " BETTER SMOOTH CUT

Glad it's not a hair cut! Rat bites, lol. MTL 👍👍

Looking to purchase a 42” cutter for my 305 cat which one do you recommend.for mowing over grown properties

5:13 8:00 10/10 i will hire him

I hope you didn't give a lot for that thing,, a young guy with a weedeater would be faster, this thing loses momentum as soon as it hits grass and takes a while to recover it's speed..

Can you get your money back for those

Maybe if you had a real excavator like a 308 cat or 309 you wouldn't have all them problems

5 ⭐'s awesome video 💯 loved it, so is there a takeuchi in the future Elite Earthworks just got a tb2150 it's a beaut. Check it out awesome channel too. God bless from South Carolina upstate viewer

all i can say it is not your kubota

Did you save your receipt ?, maybe you could get your money back.

Flow rate is way to low on the Tak...

A worn out plugging bar mower would have mowed that in 15 mins and looked better then that sloppy mess.I do it on our pond tree or four times every summer

Not critisising your work. But you might have been better on the side of the stream .

Too much talking.

You really should be tired of this by now ‼️🤷🏽.

I don’t like it👎🏻