No video :(

RydeWear Quick-Release Helmet Buckle Install and Review

Подписаться 64 тыс.

Просмотров 36 тыс.

50% 1

In this video I install the RydeWear Quick-Release Helmet Buckle onto my HJC IS-MAX2 helmet.
► ORDER RYDEWEAR BUCKLE: bit.ly/RydeWear
► ON DEMAND MAINTENANCE VIDEOS: cruisemansgara...
► CRUISEMAN'S AMAZON STORE: amazon.cruisema...
► REFLECTIVE STICKERS: store.cruiseman...
Cruiseman's Garage is a video production company that specializes in motorcycle maintenance and aftermarket accessory installation videos. Our maintenance video series for the Honda Goldwing is in use by thousands of Goldwing owners in more than 17 countries worldwide. For more information on Cruiseman's maintenance videos for the 2001 to 2018+ Honda Goldwing, go to cruisemansgarag...
For more information on how your company can benefit from a Cruiseman's Garage installation and/or review video of your motorcycle-related product,
go to cruisemansgarag...
Cruiseman's Social Media:
Facebook: / cruisemansgarage
Facebook: / goldwingmaintenance
Twitter: / cruisemangarage
Instagram: / cruisemansgarage
Forum: theglforum.com
Website: cruisemansgara...
Email: cruiseman@cruisemansgarage.com
Background music under license from SmartSound® and AudioJungle.net
#cruiseman
#cruisemansgarage
#hondagoldwing

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@jamesrenfro799 4 года назад

I would not cut more than one of the D Rings off. Just in case you need to lock it to the bike.

@kimballleighton4999 4 года назад

Because I had little room on the strap loop, I cut the D rings off first and, with needle-nose pliers, installed the quick release in less than 5 minutes. The quick release is going to make wearing my half helmet a LOT easier. Thx for the vid.

@bigmick1062 4 года назад

Seriously, looking close at the attachment clip that goes on the D-ring loop I personally would not trust it.....even the picture in the link you provided on Amazon looks like they just chewed the opening with a file or something. The D-ring is a complete loop encasing the reinforced nylon strap......this thing is just two 90% angles on a clip. What kind of metal is the clip, will it stand up? Has this been tested by any authority on the stresses that happen in an actual crash? May be more convenient but not sure it's safe when really needed. D-rings have been around for 50-years because they work, and once used a few times become second nature to strap up. Takes maybe 5-seconds to strap up a D-ring? So what time does this save?

@Idelia412 3 года назад

Buy it directly from Rydewear website, you get free shipping and don't have to pay tax. I had no issue installing it on my Shoei helmet. Great item!!!!

@richklares3849 4 года назад

Bought and installed it. Gasket picks made the job go much faster. Put one end of the buckle in and then reached the gasket pick through the d ring loop to pull it in to fit. Fits great and its so much easier than fishing the strap through the d rings . Now I have a consistent helmet fit.

@larryj8924 4 года назад

Looks like a quality piece. Currently have the inexpensive ABS plastic style on my half helmet, but likely not as strong. One benefit of quick release vs D rings is you can attach/detach with gloves on.

@Pittsburghpilot 4 года назад

I was able to install this same buckle in under 10 minutes on my BILT helmet and it works perfectly.

@AllanCruet 4 года назад

I put it on a Schuberth helmet, yes the first part is the toughest. I used a small flat head screwdriver to avoid as much slippage as your phillips, and managed not to slip and rip myself :) The D rings tucked away in a retaining strap so they are out of the way forever without having to remove them. Thanks for guiding me through the install.

@everydayjunkvids8329 4 года назад

I have an is-max 2 and it took all of 10 minutes if that long. It took longer to find my needlenose plyers to pop the buttons off than it took to put the whole thing together. I have no plans of locking my helmet on my bike, so I clipped the D-rings off with a couple of wire clippers (Side Cutters). Was a good purchase.

@studmuffin8859 4 года назад

I've used a different brand on my helmets for several years. They do the job and make things much quicker than using D rings. The RydeWear buckle appears to have a better male/female connection design compared to my buckles which can easily jam if you aren't careful. Think I'll give the RydeWear buckle a try. Thanks Cruiseman.

@EmAreDayviss 4 года назад

Vance Ruka - they do have a better connection. You’ll love it.

@keithbernstein4883 4 года назад

Two points: 1. if you don't want to remove your snap and you have enough room, you can double-back the strap with the snap and feed the doubled-back strap through the male end. 2. I put my female buckle _over_ the D-rings (I've tried it both ways)... it feels the same either way, but when put over the D-rings it hides the D-rings for a better look and also keeps them out of the way.

@terrylarsen7711 2 года назад

I just installed the RydeWear Quick Release on my Nolan full face helmet. It was a bit of a struggle, but I ended up using small needle nose pliers with long thin jaws that I had in a Blue Point set. I went to the needle nose pliers after struggling with it for about a half hour. I ended up getting it all jammed in place with the pliers in less than ten minutes. Really like the way it fits the loop after you do get it installed. I left the D rings on so I could still use this helmet as a backup or passenger helmet when I buy a new helmet and move the Rydewear buckle to the new one. I really like it so far. No plastic and easy to operate.

@david4499 4 месяца назад

I must have held my tongue just right it almost fell on HJC rpha 90s. Best bang for the buck I've spent motorcycling other than gas.

@erikdravn 3 года назад

Just remember, the harder the strap is to get in, the harder it will be to come out while riding. ;)

@johnnyayala1011 4 года назад

I too have this buckle. I’ve been using it for a little over 3 months. I do like it but I agree with you it was a bear to get it put together and I ordered the right one.

@Hogdriver88 4 года назад

Shoei Neotech comes with a ratchet QR. IDK - watching the installation of this buckle makes me wonder what's so difficult about working a D-ring!

@mikejacks1939 4 года назад

I think removing the old double rings would have made it much easier as well

@DennysPlantBasedJourney 4 года назад

I don't have that brand but i have a similar one on my helmets and on my wifes helmet. love it. So easy, quick, and secure. with mine, I just left the Drings on

@mikejacks1939 4 года назад

looks a decent product. I do think a removable steel mounting pin to thread through your existing strap would have made it much easier to fit

@jackierouse8871 2 года назад

I did not read all the comments, so this comment may have already been made. Look at the The Helmet Shop, Ratcheted Metal to Metal Helmet Clip. It is a helmet quick release buckle that, to my opinion, is high quality and easy to install. It looks identical to the Shoei helmet release buckle. I just installed one on my Bell helmet and I am well pleased.

@cruisemansgarage 2 года назад

I have reached out to them.

@r0bv123 4 года назад

After a few months of use, are these worth getting?

@davidg.8745 4 года назад

I’ve used a different brand for years and never had to remove the snap or d-rings. The main thing is to get one with a metal connection. My Neotec II came with a ratchet strap.

@markguarino1282 Год назад

Thank You for the instructions on Ryde wear Quick release. It as very Helpful

@petery3523 4 года назад

Shoei Neotec ll come standard with quick release buckle, fantastic modular helmet 👍

@brianlittell6322 2 года назад

I used a stainless steel one called RATCHETED " Metal to Metal " Looks to be a little better quality...but just my opinion....might look into it

@kennethhite8644 2 года назад

Where did you find that brand at. I can't seem to find it

@SmokeyA55 Год назад

Just installed mine excellent product

@jameshursey699 2 года назад

Use a Dremel with a cutoffwheel to remove the d rings before you start.

@harryfatcat 4 года назад

It says to remove the snap in the instructions.

@mathieudumez253 3 года назад

I left the d rings on so you can go banck to original,compleet install was abouth fifteen minutes

@SILVERHORSE347 Год назад

I have the same helmet and rydewear buckle, good info on the install method.👍🏼✝️

@dsruddell 4 года назад

i was able to install this on my SHOEI RF1100 and now RF-SR without problems

@mhilde7744 4 года назад

CRUISEMAN looking out for us.....👍....it on order

@robbiebraun9354 3 года назад

Need to get one of these for my 100% DH full face, nothing worse then trying to fasten a D ring with gloves.

@tomz3214 Год назад

The 1st Mistake is Installing the buckle - where the D rings are Over it. The D - rings are UnDeR the buckle. & Rest on the flap of fabric/strap attached to helmet. The rings don't Touch your Skin.

@robertlumsden942 2 года назад

this really helped me out. thanks for showing this. mine had the wider gap so was fairly easy. cool.

@GJRICHY1990 3 года назад

I got the on under the D rings in under a minute on my RF-1200. Not bad

@andrewmcphail1708 3 года назад

You should of cut off the d rings from the start. Why leave it on? Its only getting in the way & you never will use them again!

@hatesounds702 Год назад

took me 3mins to get the buckle on , im lucky xD

@michaeljohnson-li5nn 4 года назад

Much prefer the ratchet ‘seat belt’ style fastener as fitted to my Shoei Neotec. Not a great fan of D ring fasteners.

@PeteLeuenberger 8 месяцев назад

Didn't work for me, the d ring loop is too small, so somehow I've got to cut out the d rings

@dougiequick1 2 года назад

I dont like the split thing I would much rather they provide a spindle sort of like how conventional watch bands are secured....except not the spring loaded weak watch pins but instead threaded pins with locking in threads

@wingmanhoy3999 4 года назад

Awesome great review, just ordered, all the best.

@PTTHOR 4 года назад

Wouldn't it be easier to remove the D-rng first?

@cruisemansgarage 4 года назад

It would, but I left mine on just in case I could not get the QR installed.

@danielhautman2627 4 года назад

Narrow needle-nose pliers made the job simple for installing Ryde-wear. Rings stayed on.

@WristTaker 4 года назад

Hey man thanks a lot for the instructions. Got 2 of this and I love them.

@rydewearmotorcycledirtbike6754 Год назад

Yeah you ordered the wrong style for your helmet you needed the regular style not the beanie that's more for half shell helmets that have a lot of space on the fabric loop holding your D-Rings on meaning you can fit your pinky finger in that loop with your D-Rings. You needed the regular style which would have taken a few minutes start to finish. Thanks for the video

@DavidSmith-fw6uj 4 года назад

Daytona helmets have a excellent release

@brianlittell6322 2 года назад

RATCHETED is the brand that a higher dollar shoe helmet uses factory on their jelmets

@e8mobile1 4 года назад

What video editing program you uses?

@cruisemansgarage 4 года назад

Final Cut Pro X

@riharley 2 года назад

Whoops I messed up and ordered the wrong one....but still watch my video. lol

@jimthompson2609 3 года назад

Dude what did you do ? You showed a strap and some pliers

@cruisemansgarage 3 года назад

And yet, 12,000 people viewed it! :)

@SC8terRiderMotoVlogger 4 года назад

🤗👍☝️😎🇵🇭 Thanks 👍

@josedavidbarrancasmorato4808 4 года назад

La seguridad de los cascos la ofrece cada marca bajo normativas y/o especificaciones técnicas de seguridad en cada estado. Estas n/et, están avaladas por laboratorios técnicos. En el caso de España INTA. Cambiar el anclaje de seguridad de un casco, además de una irregularidad técnica, es mal ejemplo para personas jóvenes que pueden llegar a pensar que es lo mismo cambiar el color del casco que modificar un anclaje de sujeción que está diseñado para, en la medida de lo posible, salvar vidas. Hay que ser mujer del César, y hay que parecerlo.

@ironhorsegladiator5034 3 года назад

Not DOT approved and not worth risking your life, learn how to use your helmet and strap it on with how they came in less than 3 seconds. Don't mess with your helmet.