RZR Pro XP Gear reduction ~ DONE RIGHT & explained ~ making the Polaris Pro ready for rock crawling

Подписаться 3,8 тыс.

Просмотров 14 тыс.

50% 1

We've been copied time and time again but we can't be beat. Your best source for Polaris Pro XP 2020 2021 2022 gear reduction is right here.
#rockcrawling #gearreduction #proxp
Please if you haven't already smash that SUBSCRIBE button and hit the LIKE button if you are enjoying our content. COMMENT, we'd love to see what you have to say!
Check us out on our Facebook page and Instagram, Crash City SxS, and follow what we have going on in the shop and behind the scenes.
Have any questions?? Feel free to hit us up on our FB page or you can email us at crashcitysxs@gmail.com.
We also having a growing shop in Southern Indiana if you need any help with repairs or installs.
Thanks to all who have supported our shop and our channel, and to all the future supportors!

Авто/Мото

Опубликовано:

22 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 103

@bcfmef 24 дня назад

Thanks for posting this

@patooyee Год назад

Thanks for this video. Was very helpful during my install.

@CrashCitySxS Год назад

Awesome!!!!

@WheelinWithAustin 2 года назад

Awesome video and knowledge! helped me with my regular turbo gear reduction!

@CrashCitySxS 2 года назад

Awesome!

@jackfirth6855 2 года назад

Great video guys always enjoy all the information you share with us keep up the great work!🤘👍

@CrashCitySxS 2 года назад

Thank ya sir. Finishing up hydro steer in sprinkles and will be working on that video very very soon...

@jackfirth6855 2 года назад

@@CrashCitySxS can't wait to see how she does!

@Jackson_Hole_618 2 года назад

Another cool video. We will be utilizing the bread trick real soon! 👍

@CrashCitySxS 2 года назад

Thanks! We used grease when we did ours but the bread is a whole lot easier to clean up!

@XDecrypted 2 года назад

Great vid. I bet that's helpful to a lot of people out there. 💯

@CrashCitySxS 2 года назад

Thanks!

@oursxsadventures5276 2 года назад

Another great job!

@CrashCitySxS 2 года назад

Thanks!

@localboysoffroad8883 2 года назад

We pulled that 4seater transmission 4 times lol thank you for your help! we would've never figured it out

@CrashCitySxS 2 года назад

Anytime!!

@tonyrennhack7360 Год назад

Love the bread trick. Ive used it on worn pilot bushings as well.

@CrashCitySxS Год назад

Heck yes

@jordanellison8435 Год назад

Another trick to remove the primary is put Teflon tape on puller and fill hole with water. Works like a charm! I tried the bread trick but the pro xp clutch wasn’t moving until the water trick

@pete1735 Год назад

Man you guys know your stuff wish I could bring mine down there and let y'all do it lol

@CrashCitySxS Год назад

Time for a road trip!!

@tonyowen3154 2 года назад

Dang dude I bet you could do that blind folded! Very impressive and thanks!

@CrashCitySxS 2 года назад

Haha. We’ve talked about doing one blindfolded 🤣🤣🤣

@genebond 2 года назад

Another good one!

@CrashCitySxS 2 года назад

Thank ya sir! How’s the reduction treating you?

@genebond 2 года назад

@@CrashCitySxS It's perfect. Thanks again for doing it for me! I've got about another 500 miles on since the reduction. I got the power back from the 32" tire swap. No belt problems now!

@rawbdiggity Год назад

Great vid looks almost identical to my turbo s. Also I can’t get my wife to hang out haha

@hillbillyhangover Год назад

Great vid!! Would you guys ever do a gear reduction vid on the older XP 1000? (2014-2015) Love how you two keep it real!!!!!

@CrashCitySxS Год назад

Ya we been talking about it since the non turbo transmission is the only one we haven’t filmed.

@ridgerunner7036 2 года назад

Just got me a 2022 pro xp and I'm needing to come see yall soon.

@CrashCitySxS 2 года назад

Awesome! Congrats on the new ride!! We can fix ya up!

@twotonebrute 4 месяца назад

Thanks for the video. What is the new top end for low gear? My pro xp with stock gears can do 40+ mph in low. Obviously it won't go as fast with the new gears so what is your experience? Are the new gears noisy?

@850romper5 2 года назад

Hey maybe I should move down there where you guys are at and help me work on my Razor love your videos

@CrashCitySxS 2 года назад

Haha. Thanks! As busy as we are lately we may make you help us!

@stroke0187 Год назад

The large gear set that you tapped in with the dead blow (@35:00) if you're not upgrading the retaining ring do you have to remove that particular gear set? Seems you only pulled it out to show where the 4 bolt older style retaining ring was.

@SlowBusa Год назад

I ruined my drivers rear because of that crap on the axle splines. wish i would have seen this prior. thanks for the knowledge.

@CrashCitySxS Год назад

Yup them putting that stuff on there is dumb. I guess to try to quiet down the Polaris popping noises they have?? 🤷‍♂️

@shanekey3952 Год назад

Quick tip for removing those axles that are threadloc on without heat. Use a 2 arm puller pops em right off.

@CrashCitySxS Год назад

I wondered about that on the last one we did. THANKS for the tip!

@Rattlecanjeff 2 года назад

I wish you were closer! Need me some reduction.

@CrashCitySxS 2 года назад

ROADTRIP!!!

@mikewargo1945 2 года назад

Thanks for video helped out a lot by chance do you have the torque or the inner belt housing to motor and to transmission and do I need to line the clutches up in any way working on a 2021 pro xp

@CrashCitySxS 2 года назад

You’re welcome. The turbo trans inner clutch cover will get everything lined up where it needs to be. No need for an alignment tool. Housing to engine bolts-37ft/lbs Middle housing to engine/trans-50 Upper housing to trans-37

@spikethehornytoad2153 Год назад

For ear reduction parts?

@SuperHueyMan 2 года назад

Great video, can you give us part numbers for the gears you used? I just want to lower my low range gearing. Thanks!!!

@CrashCitySxS 2 года назад

3236132 3235232 low gear set.

@rogerl8488 2 года назад

Nice job!!!! So been thinking about getting a new 4 seater General can you do this to it? Also where you located? Thank you!!

@CrashCitySxS 2 года назад

Scottsburg IN. Yes! You can do some reduction in a general...

@genelong203 7 месяцев назад

How do you normally get there gear off the one shaft that can't be reached with the puller? I think in this video you use a press but curious what you used to press it off

@CrashCitySxS 7 месяцев назад

Have a hobo freight 20 ton press we use. Gotta get 1/8” plate to get between the bearing and gear and it’ll pop off and outta there

@BradFizer 2 года назад

If secondary is spinning in park and neutral and hard to shift do I add shims or remove shims? Clutch alignment looks good

@CrashCitySxS 2 года назад

Depends on machine…what are you working on

@BradFizer 2 года назад

@@CrashCitySxS it’s a pro xp but I got it. Added two shims and it’s perfect now. Weird it didn’t need extra shims before the gear reduction

@CrashCitySxS 2 года назад

Most likely just from having the primary off and not getting it perfectly back on where it came off. No big deal. Just sometimes it happens. Can either tighten primary more or if it was too far in pop it off and put it on with less torque. Or with the new secondary on the pros adjust the shims!

@huflungdu_TV Год назад

I have a 2021 pro xp 4 and wanting to do this same reduction. What were the part numbers to do this reduction?

@CrashCitySxS Год назад

Send us a message on our Facebook page or email us at crashcitysxs@gmail and we can help ya out

@nicksaladino6386 2 года назад

Have you guys done any clutch work on your pro?

@CrashCitySxS 2 года назад

We’ve helped a few people get their clucthing lined out on the pro

@terryprosser2477 9 месяцев назад

What’s the average time for removal of the transmission, rebuild, and reinstall?

@CrashCitySxS 9 месяцев назад

Bout 3-4 hours for us

@rickbash2177 2 года назад

Who makes a gear reduction for a maverick x3 2021. I haven't had luck trying g to find anything

@CrashCitySxS 2 года назад

If you can’t find anything for an x3 there probably isn’t anything available. X3 low gear is good though!

@TheMeanderingNomad Год назад

If you were to guess...what would you say the comfortable riding speed would be in low on a 2020 rzr xp 1000 if I go with 54% reduction and the top speed in high with a reduction of 27%? Riding on 35" xtr370s...

@CrashCitySxS Год назад

15 and 55

@TheMeanderingNomad Год назад

@@CrashCitySxS thank you

@CrashCitySxS Год назад

You’re welcome

@TheMeanderingNomad Год назад

Just following up! I have a 2020 xp1000 I did a 54% reduction in low, 27% in high & reverse as well as upgraded Retainer and double reverse chain. I now can ride up to 25 mph in low maybe 30 tops but that's pushing it. I can get to 60 mph in high possibly 65 mph if I push it...I'm running 32" xtr 370s. I'm happy with this set up. I'll be going 35 xtr370s next so it should run nice. I've got a hunterworks clutch kit with my flywheels weighted to their max. I'm riding pretty good with clutch engagement and rpms. Just letting you know since I inquired about it before I did it! Thank you

@kielgloden3183 2 года назад

What is your personal opinion on doing the 12% reduction across all gears to run 35s on a Pro XP4? No hardcore rock climbing or mudding. Just light to medium trail riding.

@CrashCitySxS 2 года назад

It would work but would also want to put a high load or big tire clutch kit in it more than likely. But you could try the 12% first and see how it does. Just depends on your driving style!

@kielgloden3183 2 года назад

@@CrashCitySxS rough estimate to have you guys do the aforementioned gear reduction and install a HD primary?

@CrashCitySxS 2 года назад

Send us a message on our Fb page or email us at crashcitysxs@gmail.com and we can communicate easier!

@VictorRodriguez-eb4xq 9 месяцев назад

Great video, where are you guys located? If close enough might have to see about bringing mine…

@sxsoutcast7651 2 года назад

Where you at? Ain't seen you in a while! Is all ok?

@CrashCitySxS 2 года назад

All is ok. Just getting a slow start to the year I guess lol. Got the shop caught up. Getting our rzrs lined out. Should have a vid here in a day or two!

@sxsoutcast7651 2 года назад

@@CrashCitySxS Can't wait!! Been waiting for that beast rzr and sprinkles to hit the trails...

@javadose317 Год назад

Do you work on sxs’s for customers? I’m in Evansville got a pro xp not sure how to get in contact with you don’t have a Facebook but I’ve seen your name everywhere

@CrashCitySxS Год назад

You can email us at crashcitysxs@gmail and we can go from there!

@charliedekoker1292 2 года назад

what do you want for the tires???

@CrashCitySxS 2 года назад

35 roxxzillas for a 15” wheel are about 1.5” taller than our 14” wheel ones. Got a good deal on them...couldn’t pass em up

@nitro1max1 9 месяцев назад

I have 2022 XP pro. Transmission fluid leaking out of the transmission prop shaft seal. I replaced the trip lip seal, but still leaking there. The UTV has 25 miles on it. What could cause this? Thanks

@CrashCitySxS 9 месяцев назад

Are you talking about the output to the driveshaft/prop shaft? There’s the triple lip seal and also a oring on the outer of the snorkel adjuster that the triple lip seal goes in. You will have to pull transmission out and disassemble to change that oring

@nitro1max1 9 месяцев назад

That is the one, thanks for info, not sure what to do at this point.@@CrashCitySxS

@CrashCitySxS 9 месяцев назад

@nitro1max1 get ahold of Polaris customer service and see if they can help out. With only 25 miles it’s clearly a damaged oring from factory

@nitro1max1 9 месяцев назад

One question, do you have to split the case to replace the seal, or can you get the snorkel out from the front where the trip lip seal is? Thanks Again

@CrashCitySxS 9 месяцев назад

@nitro1max1 have to split cases. There’s the pinion shaft that will prevent the output shaft from coming out on its own

@joebonifas9529 Год назад

Do you sell a kit or have part #s for the total reduction

@joebonifas9529 Год назад

For a 22 pro xp 4

@CrashCitySxS Год назад

You can use our discount code CRASHCITY5 at www.rockpeakutv.com to get some good pricing on the parts. Send us an email at crashcitysxs@gmail and we’ll figure out what % you want and get you the part numbers to order

@spikethehornytoad2153 Год назад

I have a 2020 pro xp which Parts do I need?

@CrashCitySxS Год назад

Hit us up on Fb or email us at crashcity@gmail and we’ll figure out what’s gonna work best for you

@rawbdiggity Год назад

What 3 jaw pulled is that? Or where you get it? Thanks

@CrashCitySxS Год назад

Just a ole autozone special lol. Thanks for watching

@rawbdiggity Год назад

@@CrashCitySxS thanks, hands down best vid on gear reduction. Sub’d

@CrashCitySxS Год назад

Thanks for the sub!

@Auxbeam 2 года назад

Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!

@CrashCitySxS 2 года назад

Yes we’ll take a sponsorship! 1 million dollars and a lifetime supply of Redbulls (regular and sugar free) would be fantastic!!! A new Pro R (well put your lights on it and give it away) a toterhome and huge trailer to travel all over the country too! Shoot us an email at crashcitysxs@gmail.com and we’ll work out the details!