S830 eBike LCD Display Setup Explained 

A BIG Thank You Dan for that tutorial, I struggled so much to find documentation on my e-bike settings until I searched for documentation on the display and finally see your video, thank you for sharing your expérience and infos like that, it's helping a lot!

Hi Daniel. Thank you so much for that excellent tutorial. I searched everywhere to find documentation on my e-bike display and I was very glad to find your video. Very well explained and easy to follow. Thank you for sharing your knowledge, much appreciated.

Hello Daniel... I start by saying THANK YOU for this video... I have a new ebike and had no way to understand the settings. But, how and why i found you was that i was truly hoping to find a way to have throttle only and never realized it was all right here in the settings to control the PAS and or throttle. THANK YOU!!! I will try to reset now and see if it really does work!

Thanks for this easy to follow video. I didn't want to mess around with the setting but you have made my bike 100% better

Just what I needed. Excellent very clear and easily understood explanation. Thanks Dan.

Hi! You're heaven sent!😇 I have this same panel control on my new Samebike Fatty! Glad to found your video for settings that I might try to change in the future.😊 Thanks a lot!🙏😇 P.S. By the way, I hope you don't mind, am gonna share the link of your video to our ebike group. Thanks again!

Best explanation of the settings I've found - thanks.

Oh my god this video was so useful, thank you so much!

I love these ebikeling waterproof kits, thanks for the vid...

Great vid Just installed an ebikling 36v kit, works great.

Thanks for the walk through. It had helped me with my controller

Thank you so much, this was a game changer for me

Thank you so much for explaining this!

That's awesome xactly what I was looking for you covered a ton of info i desperately needed.. thany you so much

That Video helped me a lot thanks a lot I had trouble with the pedal assist on my bike

Oh shit great video you had the settings I was looking g fir no one else explained that I needed

Do you know the voltage cutoffs? I'm running the same kit, with a 13s 54.6v full battery. I'm wondering what I should set the voltage to? Also curious to know what settings cut off at which voltages

Hold down the down arrow when using the throttle for 2 seconds and it will enter cruise control mode on many bikes and will remain at that speed until you use either brake.

Dan, any setting to enable cruise control ? just have my e-bike with this display but could not find it. Manual is not really telling any info

Thank you this was so helpful. I have a question. My son has an ebike conversion and he has pressed something(im assuming) and now there is a C before every display eg. 00C45.01 miles C46. 7 valts. What is this? And how do I get it off? Thanks

Brilliant guide...thank you

Thank you, great vid.

what does the level of PAS change ? is it watts ? or is it watts factored by wheel speed? or watt + crank speed?

I've just replaced a stolen Samebike lo26 500W with the same model and am noticing some real differences in performance from the throttle. Thinking this had to be something that I could sort out by changing one or more of the settings on the s830 lcd, I entered the menu, only to find that I could only change settings P01, P02, P08 AND P16. Is there something I can do to sort this out or is it a faulty unit?

hello i have SAMEBIKE LO26 the problem it dont want to turn on it turn on only with the charger do you have any experience with it

I had to change my battery connection to my controller as they didnt match. Used aknderson as you dont need to solder just crimp. My big question is how do you shorten the wires to motor and to the controller fRom the Computer. Do you just have to fold , tuck and tape or can you cut and use connectors.

Great video. How do you reset the S830 to the factory default settings?

Great video where does your throttle control plug in? As in Aus they come without a throttle but want to add one

Does upping the throttle speed damage the bike? Ive been told that it does but I'm not so sure.

P07 what should it be someone told me to put it at 1 but the manual is saying 47 direct drive and 100 for geared hub am so confused

Hi Daniel, my Samebike LO26 500w which is 3months old from new, keeps cutting out even a very short cycle, I have been in touch with supplier they are dragging their heels on a remedy to the problem, I wonder do you have an idea as to why this is happening, A friend said it could be the charger not doing it's job, that said,does the green light stay on permanently when charging or is it red when charging, my green light is on all the time. Any tips would be greatly appreciated.

I'm having bad pr0blems with this the pedal assist is laggy in activation and in turning off and the speedometer is maxed out.

How do we access P14 and P15 as they are for max current output and voltage cutoff and it is important for me to know how to change those

I did exactly what you showed and I cannot get past po2 it will not go any further is he damaged or what because I am having problems with the display

Does anyone know if it can be set up to provide full throttle at any PAS level, instead of the throttle being dependent upon the set PAS level?

Thanks for explaining it straight up. Why you change the colours

does this display have way to set regenerative braking?

Nice info. QQ, is it possible to use the SAMEBIKE LO26 as normal, without the battery? And or if the battery totally dies, and no power going to the LCD/Control unit? i.e. you don't get a chance to put it in normal pedal mode...

I Ve got trouble, after changing controller for the same type of(old was screwed up), my Odo numbers starts like 001...I don't have pas 0 and clock shows me speed like 99,9, but rides normally and with the same speed on all drives

Hey I really need help i can’t change any settings it seems like there is some kind of lock to all the settings I can’t change it any advice ?

I have a question. On my bike with hydraulic brakes, when I pull either lever there is a little icon that displays on the right of the 0 under the 100% level. It is an exclamation mark in a circle or possibly brackets (cannot remember.) Does anyone know what this is?

Do this computer has cruise control like the lectric xp 2.0?

P11 sets how quickly or delayed the onset of pedal-assist . PAS doesn't work until the PAS sensor notices you are pedaling, may take 1 crank revolution, or 8 magnets to pass the sensor. With P11=1 then PAS onset is almost immediate after 1 crank revolution. P11=5, then ~4 second delay with pedaling, P11=12 then ~ 7 seconds delay, P11=24 then ~ 11 seconds delay with pedaling until PAS onset. Don't know why anyone would want delay before PAS onset. I set P11=1.

I can get into the settings but cannot make any changes. Is it factory locked?

I connected my display to a Ancheer controller. It immediately gave a e10 code. I also do not know how many magnets are on my pedal sensor. But I have a bikeling controller to put on and I'm wondering if that will fix the error code or not. Thanks for the cool vid tho

Mine doesnt go pass 2 for some reason any fix to this?

Do you know how to unlock when the manufacturer has made certain settings locked? P08 is locked to 32 km/h, and when you press to increase, nothing happens.

I've had many questions about Error CODES: 00 = NORMAL 01 = Stay 02 = Brake 03 = PAS Sensor 04 = 6km/h Cruiser 05 = Cruiser 06 = Low Voltage 07= Motor Breakdown 08= Throttle Error 09= Controller Error 10= Signal Recieving Error 11 = Signal Sending Error 12 = BMS communication 13 = Head light error 33 = Current Abnormal 34 = Throttle Error 35 = Motor lost one phase 36 = Motor Magnet error (Main motor wire is not plugged all the way in) 37 = Brake Error 30 = Communication error (Wire from Controller to Display unplugged or Controller failiure) *These are general guidelines. As I could not locate the "Actual" error code list foe the s830. As always, if you need specific answers about your setup, please contact the manufacturer.

PO8 is the speed adjuster? Is that all that's needed to increase the speed limit? Any other tricks to it? Great vid by the way. Thanks.

How does one turn off walk mode once it’s enabled?

Anybody got an idea why i can't change any settings? I want to change P08 to get a bigger top speed but it flashes and when i use the arrows it doesn't increment at all.. the only settiny i can change is on P02 and it's the km/h mph setting. Any help ?? It seems locked

what about the bikes that stay at po2 and won't go higher?

WOW, didnt know the WALK MODE 06:30 , thanks , I was missing that option

My trike has too much power and speed. Can I reduce the Amps from 12 to something less without harming my motor or system?

I'm doing exactly what you're showing me how to do and I've tried this with other tutorials it will not go past two on mine it keeps going back to one

My S 830 display shows Error E 10. The motor doesnt work. I have checked all the connections and cables and they seem to be OK. If have changed the Controller as well. The error still satys. Any one can give me a clue? May I suppose that the motor is damaged?

I have the 27.5 I love it just wish it was dual suspension I might upgrade to it but and where are theses pedal assist magnets we can apparently count I have mine set on 8 I'm sitting on average 50 to 65 klmh I'm in Australia we can't have one not pedal assisted unless used on private property I want a Suron

Hi. I have a 20 inch fat tire 750w motor and I put the same settings and the meter says 30mph but the bike is actually going 19 or 20mph, that's me using the tire size setting p06 -24. If I compare it to my phone GPS it says 20 mph but the bike says 30. Just for test I put the wheel size to 10 inches in the p06 settings and it did gave me an accurate reading.... there's no way this bike will go close to 30mph as advertised.

For my p8 it maxes out at 10 is that normal?

What does p11 do? IS 23 THE FACTORY SET.

Hi Dan, i was messing with the setting and the battery went from 100% down to 5% and now the wheel doesn’t power up. I will have a go at these settings as you explained but do you know why battery percentage changed? is that another feature for something?

How many pins dose that display have

I wish there was a way to choose custom milage cause I got a new display but I wanted to keep my mileage of 1747.1

Is there a down load to down load

my lcd just switched off while riding, and never starts again,who knows what can be the cause(battery was 50% charged)

Thanks very helpfull..

Mine has an exclamation point next to the speed level and the throttle dosent work

But how do you connect it to your ebike?

I change something wrong on that settings becouse now the speed stay frosty at 00.0 until i go fast if i can :D Someone can help me please to change default or normal settings like befor ? Thanks !

I have a eror 07 Does anyone know what it is

Brilliant thank you

How do i factory reset?

I'm getting an error code 10 after install and throttle isnt working now

Dan: Nice video. I have the S830 bundled with an Ebikeling 36V 500W 26" rear geared weatherproof kit. I noticed you setup the PAS steps mode to 009. That mode appears available, but is not documented in the Ebikeling build guide. In theory, that setup allows you to choose PAS=0 (no assist) or gradually increasing assist by choosing PAS=1 up to PAS=9. Have you noticed that you get 9 distinct levels of assist? The simple way to experimentally determine it, is just use full-throttle-only in PAS=1 & note your speed (it's probably pretty slow). Then continuing full throttle, bump to PAS=2 & note the speed increase. Repeat bumps to PAS=3 through PAS=9. Did you note a unique new speed with each incremental step in PAS? Or did you notice only 5 unique speeds instead of 9? I'm interested in your observations, thanks.

Hi I also have p 14 and 15 It's a new 2020 bike Any ideas what they do aswell as cant set clock Cheers

Come si toglie il limite di velocità samebike lo 26 con display S830

I would like to know if this display is 52v friendly as I will be using a 14s panasonic pack from a prior ebike build. (I have the 1200 w kit that comes with the s830 display but haven't installed anything yet)

What does p14 and 5 do? You skipped over those two

Anyone know how to set the clock ?

Going out now to test my settings, which I now no were not properly set. I noticed your pas, when not running is at shows a 0, mine is 1. I’m not sure why or what I’m missing. Also, in the directions next to P10, is a notation that electric drive does not work in zero start. I have only been running this for a few days, and I am not sure that I could feel any pedal A. Not sure if that is still relevant or what they mean. Thx

Hi. My P11 settings were set at 03. I have changed them to 23 like you have. Will this affect my bikes performance in anyway (I mean damage it). I have samebike Lo26 350w

Come sbloccare la velocità della samebike lo26

Hej thank you for this nice video, I have samebike lo26 500 w I have problem with the throttle is nor working and the bike is new is like If I have to activate From the settings But I don't know how Please help Thank you

Very helpful video thanks.Just one thing what was P11 for ?

Как у тебя на этом экране показывается правильная скорость? Не могу настроить...

Very helpful! Thank you Dan. I kindly ask you to answer a couple of questions: Today I got an error E07 on my S830 (samebike LO26) while riding the bike uphill. I switched the panel off, waited for a while, and switched it on again, and the error had dissapeared. Do you know where to find a list of error codes of S830 panel? When I ride for example 15 km the trip value(TRIP) shows 15 km but the total mileage(ODO) only adds 1.5 km. So I have ridden 180 km in total since I got the bike two weeks ago but my ODO value shows 18.0 Km. Any idea obout what I can do on the panel? Thanks in advance.

Hi Dan! You seems like a experter of this LCD. Can you help me? I bought a Samebike Lo26, and after some kilometres, I got on the lcd a E10 error, I have no Idee what it means. How can I solve the problem? Should I buy a new controller? Or only a new lcd?

Is this display universal?

E 09 is controller error codes, has anyone had this error codes. And how did you resolve it. Thanks Mike

My pedal assist levels all output the same power. So p1 get me to 30mph same with p9. Any suggestions?

Can any body help I'm looking for a list of error codes. I was riding up a step hill and the bike stopped with an error codes E 09.? THANKS MIKE

great ! But if i want to do a factory reset ? Please help ! Thank you!:)

Hi I have a problem with Samebike LO26 please contact the dealer in Poland so I can complain thank you

How would you reset all parameters?

Hi thank you for the instruction video , i have a question. My speedo is say I'm travelling way faster than i am os there something wrong i have done. I have it set to mph as I'm in the uk. Thanks

are the LCDs interchangeable between ebikes ??

I have a SAMEBIKE LO26 and it has P14 and P15 what do they do?

Hi I've got a 3 week old bike with the s830 on it and the speed and trip have stopped working If I turn the unit off and on while riding it worked for few seconds Pls help

Hi Dan How do you set the clock time pls Cant find anywhere

My battery indicates 100% all the time. Unfortunately I got caught out when the battery died and went rapidly down to zero leaving me on the road with no power. Can you help me resolve this issue on the S830 display so that it indicates a reduction of the battery when being used please?