Sambo Digital Speedometer 

Thank you for this video. I have the same speedo on a moded dirt bike that was converted to street legal. The kid I got it from gave me the speedo with it not hooked up and no instuctions at all. I searched the web for proper instructions and found nothing useful until I found your video. I got it working perfect now. Thank you for the help.

Just want to say your a lifesaver, been trying to stop the damn fuel gauge flashing for ages .. my bikes from 92 and it doesn’t have a fuel gauge

Best instructions I've seen ,thanks.

That was a great video explained everything in detail.Thanks it was a great help . Davy

Well explained. Thank you for sharing with us.

Hi guy, i am brasilian and i instal this speedometer in my motorcicle. Good video

THANK YOU! perfect video for me to convert and replace for my ninja 300 Street Fighter!

Nice job on the Speedometer Paul.

Thanks, this video helped me so much, mine's came today without instructions, it's another model but the wires are the same.

Thank you my friend!!!

It can be set to run on anything with a wheel really, As long as you have a place to mount the magnet and censer it will read the speed . It has a wide range of adjustment setting in the cluster.

Hi sir. I bought the exact same speedometer and i found out a way to calculate the setting for the speed sensor in the speedometer. The instructions say base setting is 42 Hz at 60 km/h. To calculate the setting for the bike you need to know the circumference of the wheel or the diameter*pi. The setting on the speedo is the frequency of the wheel at 60 km/h. In my case the circumference is 2,05m (21" wheel with offroad tires, KTM 620 SX) Setting = (60 / (Wheel circumference in meters /1000)) / 3600 In my case calculated setting is: Setting = (60km/h / (2,05m/1000)) / 3600 = 8,13 Hz at 60 km/h. I used two magnets on the wheel which means double the frequency. Setting = 8,13 Hz * 2 = 16,26 Hz. I put my setting at 16 Hz and the speed is perfectly allign to the GPS. Hope this is useful for some one out here. Nice video (y). Best Regards

Thanks again there is one thing I found out is the numbers on the unit for dialing in the speedometer represent the size of the front wheel. I have a 17" wheel so set at 17 and it worked.

Thanks for posting this. No doubt there are a number of Haosen Hawk & Bashan Broz owners that will benefit. If you ever look into or try alternative seats please post your findings.

Thank you very detailed video. Now I have to go and install guess I have delayed the inevitable long enough. 🤔

Thank you for this video ... I was struggling to calibrate the speedo ...did'nt know how .. all sorted.

Nice one mate

I would like to add a personal experience that may help many. I have installed this meter on My Suzuki GS 150 which has a Front Tyre size 2-75-18 and Meter Config had to be set to 09 12 To Get The Accurate Speed

Really nice and informative video. I am in a bind. My bike's LCD display damaged again by condensation 2nd time now! Hence looking for videos on how to install these aftermarket speedo's. Either fit an OEM which takes 5-10 minutes but cost 400 bucks on that speedo alone. or use this Sambo one (re branded in our country as Zaddox) at only 50 bucks. Its hell'a cheaper but yes I would have to deal with the Wires, The mounts and the Magnets.

Sir wat color i test f the product is good wat color should i test in battery

hey got a question on which wire was it to get the fuel gauge to stay full? I WISH I CAN USE IT AS a battery guage on my eletric bike

Nice one sir new subscriber here from philipines.

You can go to the CSC website and order a fuel tank with the gas gauge if you want to add the fuel gauge.

excellent video.. very informative.. i'm having trouble with the rpm, it is very high and does not match with my bike.. can you help me??.. thanks, really appreciate the answer..

How has the durability been on this unit? Looks like you have had it for a year or so. I seriously considering it for on of my bikes. Thanks for the great video!

high--I've just bought a unit and the vid is very helpful--but I have a question--I have two extra wires with bullet connectors apart from the speed input connector (3 terminal), gear number(6 terminal) and the main 9 terminal connector. I'm guessing that these wires (a brown/red and a grey) are for an engine service/fault light--? can you please confirm. I'm hoping that my kawa electronic speedo input(3 wire)--will produce a pulse that the unit will recognise for speed--otherwise its a single magnet. I have checked that the unit requires a permanent 12v (red) and a switched 12V from the ignition (black) to activate the display?

good evening, i have an atv, a dvx 400, it have 1 cilindre 4 stroke. I have a problem with this tachometer, where i should connect the rpm wire?and what i should set on the speedometer?

my chinese cluster came with the wires labeled. but my bike they are not labeled. for a chinese bike what is the rpm signal wire? and also did you connect the neutral wire from the cluster directly to the top of the coil?

Hello! I have connected the speedometer and i am wondering one thing, my bike has original magnetic speed sensor with a magnet installed in the brake disc already. Its possible to use original magnet with chinese speedometer?

Can i ask sir where did you connect the wire for the clock is it directly to the battery? If not any particular positive source? Thanks

Hi I recently installed one. Was you able to set the mileage do you can stay consistent with it?

any way to stop water temp from flashing without connecting a water temp sensor? and did you use the c clips for the magnets or just glue them in?

Great video sir. Pls help me. What does it min by the first 3 digit??? And where did you get the idea of number 017 on the first 3 digit. Thank you very much

Great video, thank you. Just have one question. How do you attach those darn magnets to the wheel?

How do you change colors? What do the numbers mean? My says 588 01. The tach works but the speed is a mess. I have 2 magnets.

Hi am wanting to put it on my spy f1A road quad I've bought it here in the uk but am not to cleaver on wiring part but am going to give it a go cheers for your video cheers Paul

can you help please for some reason my tachometer is at max even without being connected also my gas gauge keeps blinking with it just being connected to the blue and white wire from the bike

Any idea on how to set kilometers back to old value? When replaced it goes to 0.

Need help hooking this unit up to a drz400sm 2005 model. What I need to know is the colors for each wires that got to the speedometer to the bike 🏍 wires. I am having a hard time trying to figure it all out.

Hello Sir Your Video Helped me a Lot But Can You Please Explain How a Trip Meter is Reset Without Resetri g the Total Mileage. I tried by pressing and holding the right button and then switch on the iginition but it sometimes doesnt work and sometimes it resets both the trip meter and total mileage to zero. Can You Please Find out the way for resetting the trip meter.

Do you know if it works with a 2 cylinder bike with 4 spark plugs?

So if a bike gets signals from the ecu will this work with it?

Hi. I can’t get that calibrating screen ... i tried push botton and then connect it to battery. P.s my bike don’t have built in battery..😔 And also, i didn’t calibrate it, and it dont show any speed..

Did you ever find out what the first 3 numbers are? Doesnt make sense to just choose random numbers for the settings. They mean something. Is it by chance for the tire size?

Awesome video exactly what I was looking for thank you so much, did you get the temperature to display I can’t figure that out ?

Hi sir, im from the Philippines. I just wanna ask a few questions about the Rpm. Because there is some errors on my diagram. It says that yellow and blue wires are my flashers i guess? Thankyou sir!

Hi Sir I followed your instructions and now my speed reading is much accurate, but my concern now is when I reached 60kph my reading would start to go down like I know Im running about 70 but my reading shows 50+ hope you can help me out

Also my tach won't work found out to put a one Kila ohm 1/4watt dioad between switched power source and tach sending wire.

Hello, I bought the same speed meter on my engine, but we could not adjust the calibration, it does not count km and the trip is always 0 my engine is Yamaha xt 600 and the front rim size is 21 "can you help me ...

So man I’m coming to the party a little late but can you explain the pinned connector with all the gears it’s confusing me I got the other I believe. But this one has me stumped........also very random but what kind of background music is that I love it

Hello sir, is there a free diagram when purchasing that type of speedometer through online?

How's the visibility? I feel that reflections would make it hard to read I think outdoors in daylight (when 90% of its use will). I am considering one as a cheap and easy way to replace the broken mechanical gauges on an old bike.

Hi great video! I have the same speedometer trying to install it on atv Suzuki Ltz 400 everything goes good except the gears I don’t know how to wire them up pls help. Thanks

Thank you for your video, helped me alot, but I have some open questions with mine (13.000 rpm, 6 Gear (gears shown in the display)). When we are bridging blue-white (fuel), it will show full but will this not destroy the speedometer in future because of permanent signal? My speedometers config was stock 035 12 in the video 17:38 you are talking about 2 is single cylinders and 4 multiple cylinders but isn't it for 2-Stroke or 4-Stroke Engine for the correct rpm calculation?

hi sir im from philippines, great vid.you sir helped us alot.bt i only have one problem right now sir, i can program the time bt i cant save it.keeps on going back to default once i turn the keys off. how do we save the settings sir?thanks

Thanks Alot.. this explained everything to me except where to place two magnets on Disc..?? Is it ok if i place two magnets on straight line??

Well done a great help I’m just struggling with which colour wire is supposed to go to coil for rpm to work and also neutral light too it’s scrambled my brains all day An would really appreciate your help plz

Any idea how to fix the background color ?

hi . where did you tap the wires so that the clock will not reset every after turning off the motorcycle?

Hi, good pm will this fit a ninja 250r?

Does it come with rpm sensor?

I installed on my yamaha xtz, but where i put the sensor for speed?. Shall i put on the pinion gear or make a bracket down on the front suspension?.

Hi what was total time spent installation,? Thx

Thank you so much for the video.. What is the purpose of the magnet?🇵🇭

I'm putting it on a Royal Enfield Thunderbird 2009. It have a mechanical odometer, electronic techo, & fuel gauge. Can I fit OEM speed sensor with some modifications? , Instead of the magnets. Please advise

where does the rpm wires go mate ??

Where does the "speed signal" wire connect and how many volts goes to it?

you do not connect the gears of speeds from 1 to 5 in it? in the video you can't see the numbers turning on when you set the speeds.

About the magnet on the disc, which side it should B facing?, Towards the sensor or opposite?

I just ordered this meter for about $26 , postage included, AliXpress

So I have the same bike so we can’t use the fuel or the gearing correct?

Does it permanently store how many miles you have done? I'm looking for a speedometer, but quite a few of them seem to reset after a couple thousand miles. Thanks for the in depth video too.

Hi mate I've finally wired it up 1 lights work 2 turn left&right works 3 full beam works Now the bad part as soon as I put it in gear it is like I've turned the key on/off any ideas still need to work out the gear numbers cheers Paul

What happends when u disconnect the battery from the headunit? Does it saves the Data or is it lost?

Is it suitable for scooters??

Hello... congratulations...can you tell me please about the neutral shift?i cant fix it.and the fuel is flashing all the time.pleaee save me.thanks a lot

Sir, does the fuel gauge work if the bike dont have fuel gauge indicator like honda xr?

Did you leave the old speedo sensor in the wheel hub and just remove the cable? My cable only screws out 2 turns and stops.

Hello sir how to set the time

what does each of the number represent

Is anyone else happing a problem with the odometer? Mine doesn't seem to be updating, speedo works fine.

with me, the clock always goes to zero when I turn the ignition off and on again, why?where can I get a readable manual?

Sir pwd ito SA tmx125

Hi, Has anyone fitted this unit to a bike without a battery? I’ve fitted it to a crf450 but obviously can’t store the settings. What is the best way to get over this problem? Thanks.

I was looking to install digital gauges on a scooter ! But I don't know how it would turn out with the gear selecter since a scooter has no gears any suggestions ? Still looking for the right set up !

what application in your phone can we use in speedometer?

My main concern here is that my bike currently has 35k miles on it. Is there any way I can adjust this new cluster so as to not be misleading?

Hi when you tapped into the coil for the rpm wich wire did you connet to the coil and where did the blue and yellow wire connext to , did you splice the blue and yellow to the coil ? Many thanks

di you mean samDo ? i ordered a identical model from another brand and it sucks cant even enter the setup. i can find a similar one but its not sambo but samdo ? thanks for your video its amazing !

Buenas Tardes¡¡¡ como se puede pasar a color azul en la pantalla del tacometro?

So what function were you unable to use on this cluster ? Total time for install?

how'd you mount your speedo magnets?

quick question what is the seat height on this bike?

anyone tried hooking this up to a 2 stroke moped? im especially interested if rpm gauge will work. it has an AC type magneto iginition system, so actual power for the gague will have to bo transformed to dc.

What’s this 12?

Can i use this as replacement for my DUKE200 speedometer?

I'm very confused! I have a 1 cylinder motorcycle. I am very interested in the RPM counter displaying correctly at whatever speed it is. But in the options it only has a 2 and a 4 ..... where is the 1? Can somebody help me? I don't want to waste my money on something that doesn't work for me and feel unsatisfied! Those who have this and have only 1 cylinder works?

To install the magnets on your front wheel hub you drilled 2 holes in it?

how to save the time? caus every time i turn it off the clock goes back to 12:00

Which wire of the speedo shows the rpm?