Samsung Microwave Repair - Door Will Not Latch When Closed - Door Key

Подписаться 232 тыс.

Просмотров 142 тыс.

50% 1

This video shows you how to Repair a SMH8165ST Samsung Microwave DE64-00760A Door Key
Symptoms may include: Door Will Not Latch When Closed
View this video on our site: www.appliancevideo.com/samsun...
ApplianceVideo.com provides repair and diagnostic videos on *Major Appliances*. Our videos have been produced and reviewed by our factory certified technicians with over 30 years of infield experience. From the Do-it-yourselfer to the senior tech, our videos guide you step-by-step so you can successfully diagnose and fix your appliances with ease.
Fix it Yourself and Do it Right the First Time
Visit us at: www.appliancevideo.com
If we helped you, please support us and Subscribe to our channel!
ru-vid.com...
Or send us a tip, so we can keep making free Appliance Repair videos
Paypal: www.paypal.com/paypalme/appli...
Admiral
Amana
Caloric
Coldspot
Crosley
D&M
Electrolux
Fedders
Frigidaire
GE
General electric
Gibson
Glenwood
Hardwick
Hotpoint
JC Penney
Jenn-Air
Kelvinator
Kenmore
KitchenAid
LG
Litton
Magic Chef
Maytag
Modern Maid
Montgomery Ward
Norge
O’Keefe & Merritt
RCA
Roper
Samsung
Sears
Signature
Speed Queen
Sub-Zero
Tappan
Whirlpool

Хобби

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 203

@donnamorrison5847 Год назад

Thank you SO very much! I was able to repair my microwave. However my issue was not exactly the same as the issue you described. Several responses below state the issue I had as my latch was not broken but the piece on the door that holds the spring on the bottom was broken. After reading responses below, I was able to hook the bottom of the spring on a hole that was already in the microwave and pull the spring up to hook the top of the spring to the latch and it was fixed. You may want to do a video on this fix as several have mentioned this problem below. Again thank you for showing how this worked!

@SethLippman 3 месяца назад

Yes to both! Thanks so much, Cristian, for the original video and this comment. I had the same issue where the plastic piece on the door was broken, but the latch wasn't. I found a place to hook the spring in on the right side of the plastic bit that held the the spring hole used to be, and then followed the rest of the video instructions and my microwave works again!

@phoenixrising011 4 года назад

I was able to stretch and reattach the lower hook of the spring to a metal hole near where the old clip broke off. Took 2 minutes and no new parts and it works fine again. Very useful video.

@Appliancevideo 4 года назад

Nice work! Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RU-vid channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

@mekamiya 4 года назад

I tried that too- but there wasn't enough tension and spring kept falling off. so frustrating

@shipeepihs 3 года назад

I did the same too. On mine there was a small hole that didn't provide enough tension, but then there is the portion with the larger openings that run consistently down the entire side and the spring will actually catch if you hook it to that too.

@matthewg3647 3 года назад

@@mekamiya the key is STRETCHING the spring and then putting it in the lower hole.

@eltonslone2 2 года назад

Great video. I used a 5/64 drill bit and simply drilled a small hole from the outside of the plastic in, level with the indent on the metal on the other side, approximately where the spring was anchored previously. A toothpick fit through that perfectly and the spring tension keeps it pressed up against the metal. I clipped off the toothpick end sticking out of the outside and, voilà. Perfect. Much easier to attach the spring to this lower "rung" and it’s durable. It was really tough to get the spring caught on a lower hole, so this solution proved super easy.

@shelleystalkerhalik3543 8 месяцев назад

Thanks so much. You just saved me a huge repair bill. Mine wasn't broken on the hooks though. It was broken on the part inside the door frame where the spring attaches to the door. Paul Ricalde has a video where he attaches the spring to the metal fins on the inside and then attaches the spring to the Hook piece and then puts in back together to create the tension needed again. You are both life savers.

@RahsaanTownsell 6 месяцев назад

Interesting. The thing in the door frame that actually keeps the door latch in place once you hook it onto the spring is what broke on mine.

@halschaefgen9560 5 месяцев назад

@@RahsaanTownsell I ordered a new latch before taking the door apart. After it arrived I discovered my latch was fine. The piece that hols the lower end of the spring to the door had broken in mine. Fixed that by drilling a small hole in the remains of that stub and feeding the lower end of the spring through that hole. So far so good.

@RahulMehrotra1 3 месяца назад

thank for you this tip! 🎉

@tammygrossman635 2 года назад

thank you Christian, my husband broke the door key on my microwave about 9 months ago. been trying to find another that would fit our custom made cabinet with no success. decided to youtube it and found you. ordered the piece off amazon and today i just happen to have the day off. my husband works a lot of hours so i did it myself. i now have my microwave back just in time for thanksgiving. Thank you, Thank you, Thank you!

@danwoodward4816 2 года назад

Exactly what I needed to see and able to repair my microwave without any cost, just had to re set the spring. Fantastic!

@johnassad9511 2 года назад

Thank you! Having the part number displayed was incredibly helpful. Perfectly done.

@johnguion8141 2 года назад

Perfect! Three minutes after watching this video I was back in business. Thanks!

@davidsmith5087 4 года назад

This video totally saved me! I fixed my microwave door thanks to this clip! Thank you!

@Appliancevideo 3 года назад

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RU-vid channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

@marionlaney-adjuster-estim6348 Год назад

Great video to allow me to figure out a solution. Door spring attachment bracket was broken (same as KentuckEd), not the actuator in the video. Drilled a tiny pilot hole from outside edge of door just below the position of the attachment point. Screwed in a small /short screw to give the spring a new door attachment point. Using two needle nose vice grips, rotated one end of the spring 90 degrees to mimic the angle of prior attachment. Door closes without screw causing an issue (if it stick out too far it will stop the door from closing). Working perfectly.

@amc1265 Год назад

This video is an excellent video for repair of the microwave door latch if the key is broken. It was also useful in giving me the confidence I needed to open the door assembly and realize the plastic area holding the spring was my problem! I wish I had read some of the great suggestions here. I ended up heating a 90 degree hook set tool up with a torch and creating a new hole behind the area that had broken. I stretched the spring a little and curved it into the hole and then bent it to secure it. The tension was perfect and I was able to follow your instructions on putting it back together. My microwave is operational now! Thanks for the great video! I have subscribed and look forward to your help if I run into any other issues!

@ellenoldham7470 Год назад

Problem solved in 2 minutes! My spring came loose like some others- no new parts needed! Thank you for this video!

@m.coleman2300 Год назад

Your instructions worked like a charm. Thanks!

@beckypearman5301 9 дней назад

mine was just the piece that the spring hooks to as well. I used a piece of string to attach to the lower metal plate with a hole in it for the bottom of the plastic latch. So far easy peasy and I did it myself! Thank you

@polakse Год назад

Excellent video. Concise and informative. Thanks!

@juancalao 6 месяцев назад

You just saved me a lot of money on a repair bill. Awesome video

@tacticaljackson 18 дней назад

Thank you for this video! Slightly different model of Samsung microwave and the clip the spring attaches to was broken. I attached the spring to one of the brackets and it’s good as new… for the moment 😂 thanks for helping me limp along if only for a bit longer!

@annikaskogg4 Год назад

Perfect video to fix the microwave spring easily. Thank you so much!

@ctmurphyri Год назад

Thanks! Perfect video!! Exactly what I needed.

@annettebrower3589 Год назад

I just fixed our microwave! The piece wasn't actually broken, the spring had just come off at the bottom. Thank you SO much!!!

@routermike 2 месяца назад

Great job. This is just what we needed to fix ours. Thank you!

@johnmedina7680 26 дней назад

Thank you! One of my kids broke the microwave door latch. This video saved me a ton of time and some cash!

@bennettmarka 2 года назад

Just saved me $400 - awesome, thanks!

@carlosespinoza2493 3 месяца назад

Thank you! Microwave broke and this video got me thru the process! Took less than an hour and the wifey is happy! 🙌🏽

@pemarts Год назад

Thanks for the video! Great quality

@sierraford3338 Год назад

Wow we were able to rig ours without even buying a new piece. This was so helpful, thanks!!

@walterthomas8997 Месяц назад

Mine broke on the door side. Safety wired spring thru the hole to the next opening in the metal bracket. Thanks for the video, they are a tremendous help and saves us the big $$$.

@JBoyd-tk1ep 8 месяцев назад

Video was exactly what I needed. It explained how to take off the doors plastic cover exposing the latch mechanism. Like others, the metal spring had become detached from the interior plastic mount which seems to have simply broken off after two years of use. Fortunately I hooked the spring to a metal part in the door mount which allows the spring to function as before. Replaced the plastic door cover and the latch now holds the door closed and functioning again. I hope this holds. It would appear that the interior plastic parts holding the metal spring in place are not built to last- given the wear and tear on the critical part of the door and latch.

@larrykindel3865 5 месяцев назад

Thank you so much worked great with your help got it fix in 5 mins. Again thank you so much.

@jdaniels1313 11 месяцев назад

Thank you! My problem was the mounting point for the lower spring mount had broken. Your video help me understand and fix the issue. I also found a helpful video dealing with the lower mount on the "Fix It With Zim" channel.

@robertawilliams9720 2 месяца назад

Thank you for all you help

@bobgarand699 Год назад

Fantastic video. Very informative and easy to follow. Thanks for saving this not too handy man a considerable sum $

@dustybenson4009 9 месяцев назад

Very helpful! Where the spring was supposed to attach had broken, so I drilled a small hole right behind where the spring hooked and it worked great again, at least until that plastic breaks

@iAMfromZXO 7 месяцев назад

Thank you so much !, you helped me fixing my microwave .

@halschaefgen9560 5 месяцев назад

Many thanks for the excellent video. As it turned out, my Door Key was fine, but the part of the door that held the lower end of the spring had broken. BUT, it was your excellent video that showed how to take the door apart and what the mechanism was like that allowed me to DIY.Thanks again.

@imwithpluto 8 месяцев назад

Perfect video, thanks so much dude

@spiffikins 3 года назад

Thank you so much! I was able to fix my microwave for less than $8 - so much better than having to buy a new one!

@Appliancevideo 3 года назад

@ysrracer1 2 года назад

Thanks man, you saved me a hundred bucks, and my wife loves me again :)

@Julie-rz4eh Год назад

Thank you, we fixed the problem without needing a new part.

@christianmonterio7572 2 года назад

Thank you perfect video for the help I needed .

@CameronYoung-fn6xy Год назад

Thank you Cristian! We're gonna order the new door key! (And funny enough, that kitchen is the same layout as ours. Small world.)

@user-xi9jr8uj1p 5 месяцев назад

Good Vid!!! My problem was the little plastic clip on the door was what was broken. I was considering using the 3D printer to reto-fit a clip until I realized I can just use one of the medal tabs in the inside of the door to hold the lower end of the spring. Done and done @ $0.00 and 5 minutes. Thanks to seeing this Video and my checking before ordering the latch as the latch was not the issue.

@eric146999 Год назад

Thank you very much it looks pretty easy to do I appreciate it I will let you know

@chrisbingel3820 4 месяца назад

Thank you for this. I had the same issue as many others in the comments. Why would they make a piece constantly under tension out of plastic?!

@joseluishernandez2508 3 года назад

Thanks a lot. Very descriptible video. I disarmed the door and for my surprise, it was broke the another extreme of the spring base. I put itin the metal structure at the same place where the base was engaged originally. It funtioned excelent.

@Appliancevideo 3 года назад

@miatrinimelful 2 года назад

I need to try this Jose because once I opened mine, that was my problem also

@kamalvirk4225 2 года назад

You are amazing….. God bless you my brother…. This is what I was looking for from last 5 days…. I had almost similar issue with my appliance. The key was fine but the plastic piece attached with the door where the spring has to tuck, had a crack. So I have used strong glue and after 24 hours I fixed it….

@prettytayy511 Год назад

What type of glue did you use ? I’m having the same issue with my microwave

@davidcampbell2364 Год назад

Very helpful thanks!

@christopheradcock9499 2 года назад

Awesome video. Samsung claimed that the door latch was not serviceable. i will be ordering the part and watching your video again to repair mine.

@hollyodonnell6046 2 года назад

where did you find the part to order? Did you order it though Samsung?

@dalarie 3 месяца назад

Thank you for this video I just opened up. My microwave found out that the key latch wasn't broken. But what the Spring attaches to in the middle was. Essentially rotated the Spring to hook onto the metal piece. And the hatch now closes

@rockcvn71 Год назад

Hey great video man! Call me crazy,but what I did with my handle was used a older Hewlett Packard CD rom laptop player. There was a screw hole bracket affixed to the case on the cd rom housing(you release the cd rom player buy taking screw out on bottom of laptop) then the whole cd rom player comes out. The I took the two tiny Phillips screws out that held the bracket on,and I used JB quick weld to fasten the bracket onto the handle(let dry over night,because of tension from spring). Now I just so happened to have this laptop part laying in a drawer in my kitchen, so I saw it immediately, and I could see that would be a good sturdy fix to a broken plastic piece. It took about 45 minutes to complete and overnight for weld to set to hold under pressurized spring ,but nevertheless it worked...and mostly because of your video showing how to take the guard of carefully. 😃

@doreenbowler8037 6 месяцев назад

Thank you!!!

@ontzsboy 9 месяцев назад

Thank you!

@shutterflyboy85 2 месяца назад

My problem was the tabs on the door also breaking off. For me it was the top bar glide and the middle spring tab. I did 2 things to reinforce the entire new door. I used a glue gun and pumped a small bead around the bottom of each of the 3 tabs being careful not to get glue on the holes to reinforce it. The other thing I did was superglue a small thin aluminum "L" bracket on the tab off the latchbar where the spring attaches to the plastic notch is now reinforced as well. The door was $235 but the option of buying a new oven ($270), having the new vent fit exactly where the old vent was (through the back wall) having to pay for a reinstallation and removal and then possibly having to drill more holes in my 10-year-old cabinet wasn't an option! Your video was invaluable to necessitate a relatively simple repair.

@milvolts1 2 года назад

Thanks for sharing. Well, after watching a few videos, I've come to the realization that not all samsungs are built the same. For me, luckily the hook on the removable bracket didn't break. But the hook on the door did. So what I did was make my on eylette with some wire and it worked like a charm.

@randalallison8937 2 года назад

Same break point for me. I used a small zip tie and routed it through a hole in the metal track. Adjusted to be at the same location of the door mount. Works like a charm.

@oldfoot8080 Год назад

Thanks for tips!! Used the Zip Tie technique too and works like a charm. Randal great idea!!

@fabriciodefigueiredo3426 Год назад

Great, thanks!!

@808toLA 2 года назад

Clutch. Thanks again!

@SevenSlotSociety Год назад

Thank you for this! The mounting point for my spring actually broke, but I was able to hook the bottom of the spring to another point on the frame. We’ll see how long it lasts!

@ericthude8117 10 месяцев назад

I have the same issue! Where did you hook it and has it held up?

@j_r_j 5 месяцев назад

Thanks!

@justinwashington5077 Год назад

Thanks Brother

@johnglass8566 Год назад

Thank you Sir 😊

@lizdold6083 6 месяцев назад

Thank you

@christophermullins2922 3 месяца назад

You the best

@catdogcattt 5 месяцев назад

Thank you so very much. Fortunately nothing on mine was broken. I just somehow managed to dislodge the spring, so it was just a matter of putting all the pieces back together.

@eric146999 Год назад

Yes you you were correct the spring bar was not connected to the spring but the spring Bart was not broken it just got loose the only problem was we broke the piece off that was holding the spring but we did connect it and it is holding thank you so much for everything

@AE86silverredd 11 месяцев назад

Thank you I thought the problem was on the opposite side …it was the spring mounting point that broke on the door side I had to hook it to the metal area a little tight but still worked out 👍

@ronaldbastian9484 2 года назад

Thank you! The other end of where the spring attaches broke. Hooked the spring to one of the metal fingers. Right as rain...for now.

@jamesluna4684 Год назад

Do you mean the part that is inside the door broke? Because that’s where mine broke but can’t figure out what piece that is or how to replace it.

@kentuckyed Год назад

Absolutely excellent video. The piece on my door that holds the spring broke. The latch wasn't broken. So I stretched and customized the spring a bit to grab the metal door surround and put it all back together. Works OK now. Hopefully it'll stay working.

@roberthumphries9964 Год назад

Same issue! Thanks!

@gregbaron6881 Год назад

Same here exactly. How cheap, the piece that broke was less than 1/16th plastic. Connecting the hook to the door is way better, until the connection to the arm breaks. Now the panel to the right where the controls are is loose. Mine is only 5 years old. Designed obsolescence. Throw it in the landfill and buy another piece of crap microwave built in China.

@cw6780 Год назад

Same issue - Thanks! Hope it holds!

@c_y_n_i_c_3822 17 дней назад

bless your freakin heart. was sure I'd have to buy a new microwave.

@intelligentthinker8085 2 года назад

Thanks for the tutorial, Where can we find the new part?

@ggxavier9263 5 месяцев назад

In my case, the key was fine but the door hook broke. I was able to drill a tiny hole into the metal braket that held the plastic panel and attached the spring there... latches even better then before. Thanks !!

@sharoncollins-bm2pe Месяц назад

Thank you for the video. My door key hook is in tact, but the other plastic hook that holds the other end of spring that is attached to microwave door broke. Is there a video for that?

@SJLAN 8 месяцев назад

Thank you for the video. For my issue, however, the slots at the top and bottom where the key attaches to have broken off. Do we have to buy a whole assembly that’s connected to the door for that?

@goonieschick3 6 месяцев назад

Thank you! How do repair the door assembly? I thought it was just the door key, but the piece that holds the latch on the inner door assembly is broken. Thank you! 🙏🏻

@penguinatorfps8205 Год назад

Thanks bro. Unfortunately the piece that holds the spring to door broke. But I managed to find a hole on the metal side that works perfectly. They'll never know

@penguinatorfps8205 Год назад

Oh and I got it out the trash. 300 dollar win for me

@jrhaynes1967 2 года назад

so do you have to replace the actual door key AND spring? Or just reset it. Based on the comments, some people reset theirs. Could the spring have simply fell off or gotten disconnected from the latch?

@muhsinalie 3 года назад

Hi Cristian...thank you for a great repair video...when I opened up the door as you described, I found that the key itself was intact but the piece of plastic inside the door where the spring connects to was broken...not sure if that part slides in or is part of the larger inside of the door...is that small part replaceable? Any ideas would be greatly appreciated!

@carloscuneo5543 2 года назад

Same thing happened to me, any ideas?

@Appliancevideo 2 года назад

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

@richardcurrin7812 2 года назад

I just found the same issue I have not been able to find that part for sale It looks to be just as likely if not more likely to break off as the hook on the door key

@michaelhoot9759 2 года назад

I hooked one end of the spring under the squared notches on inside of the door.

@cristianebrazil32 2 года назад

@@michaelhoot9759 did the same thing and it worked ok. Gluing that part back would've not worked, and this is cheaper than buying a whole new door.

@malcomdevaughn898 Год назад

You have an excellent video, but when we went into the microwave the small black piece that the spring connects to was broken. There is nothing wrong with the latch. Is there a part you can order for that and if so how would you put it on? If there is what is the part number and where to order it? It looks like you would have to glue it with some seriously strong glue. We think that part probably doesn't exist as it was built into the microwave. I think we'll probably have to get another overhead microwave. Please let us know. Thank you!

@mikekious4125 Год назад

Really good video, however, when I removed the hook I noticed it wasn't broken as demonstrated here. It the what the spring attaches to in the door itself that was broken, which is a bigger problem. I think I need a new door.

@jimbobroski4884 4 месяца назад

Is there a replacement piece for the slot the spring attaches to on the door? Mine has broken so I have nothing to attach the spring to

@lizdold6083 6 месяцев назад

Hi I thought my door key was broken but on further inspection it is the Spring hook on the inside of the door is there anything I can do it fix it? Glue, epoxy or do I just have to buy a new door or microwave? Thank you for your time liz

@lizdold6083 6 месяцев назад

Also it is a samsung microwave

@TheRealMrGuvernment 4 года назад

Great video, question what are my options if the part that snapped is the hook in the door part? Do i need an entire new door?

@Appliancevideo 4 года назад

@shipeepihs 3 года назад

That is what happened to mine too. I actually just hooked the spring up to the little metal portion that is next to the key so that it would have similar tension and it works without buying anything else! I realize I am way too late at this point so sorry.

@TheRealMrGuvernment 3 года назад

@@shipeepihs Same, once i got it apart hooked it onto another area close by and golden!

@gabert83 3 года назад

@@TheRealMrGuvernment this is my problem as well, the little plastic piece broke off the actual door. Gonna give this a go. Thanks!!!

@uSTAYFROSTY 3 года назад

@@TheRealMrGuvernment Had the same issue. This ended up working fine. The door now closes and we have food again. The only concern I see is that the detent spring is pushing into the latch key causing it to bend, which may eventually warp it. But this is way cheaper than buying a whole new door. Shitty design on Samsung's part.

@tlg284 Год назад

Should have taken apart the door cover before I ordered the parts. The hook inside the door was broken, so like some other people I just hooked it to the metal frame. Now it’s fixed with no new parts. Thanks.

@bcso105 4 месяца назад

That's great and all, if that's the problem. The problem with my microwave is the plastic piece where the bottom of the spring attaches is broke. So what's the fix for that? A whole new door that costs as much as a new microwave?

@candyman8042002 Год назад

Is there anyway you can do a video on how to clean between the two glass pieces on the door window? My wife burnt potatoes on the stove and now there is a blue hue in between the glass pieces..

@johnnnny Год назад

I wish this was my problem. The bracket at the top that this latch slides in is broken. It's all part of the main door assembly, which now looks like a $200+ fix, rather than the $18 latch. That's my luck though, can't ever be easy LOL

@jaybraun2947 Год назад

I was able to get door fixed , light goes off etc. but when I go to cook it doesn’t work. Too much tension on spring maybe . Any advice would be great thanks

@lynnetterobinson8788 Год назад

Ugh, what about when the parts you put the key with spring on the actual door are broken? Can that part be replaced without a whole new door? TIA

@guillermosahaniuk4865 2 года назад

I need help with shm2117s microwave samsung touchpad replacement, may i have some help withbit?

@jenniferlynmartinez 2 года назад

What can I do if the plastic piece the spring attaches to, to the door has snapped off? Do I have to replace the entire door?

@obm4blade Год назад

Good video , we could have fixed it but the cheap plastic piece the spring connect to was broken. It was attached to the door no way to fix that.

@nikandbdog Год назад

The piece on my door that holds the spring broke. The latch wasn't broken. Any idea what the part number is for that plastic inner door frame?

@darlenedavis381 3 года назад

will this part number work for a Samsung MS19m8000ag?

@Appliancevideo 3 года назад

@Jaime8aJr 2 года назад

What about if the door latch key is not the issue. The hook that attaches to the spring is the issue? How can I replace that part?

@efmchale Год назад

What if the place where the hook goes that's attached to the door is broken? Full door replacement?

@luisrodriguez227 Год назад

What if the part that broke was the hole on the door where the spring goes before plugging it to the key hook??

@LinzseyslilPad 11 месяцев назад

The bottom part of what my spring attaches to is broken. The door key is fine. How do I fix the broken part?

@tcarmack3494 3 года назад

The small clip that the spring attaches to has broken. It is art hard the microwave. What part is that?

@Appliancevideo 3 года назад

@kristendipini3365 3 года назад

We are having this same exact issue...did you figure out a way to fix it?

@zrly 4 года назад

is it okay to use a microwave without the inner door trim ? mine doesn’t seem to be snapping on

@Appliancevideo 4 года назад

@jrhaynes1967 2 года назад

if the hole that the spring connects to on the door "rips" - what are the options?

@jeffberman2023 2 года назад

Connect the lower spring to an open area on the microwave, an eyelet or other place you can hook it to. Just stretch the spring as needed as you NEED tension

@francheskasmith7174 3 года назад

The part that is broken in mine, is the hole at the door where you insert the spring. How can that be replaced if it is attached to the door?

@Appliancevideo 3 года назад

@meormsbyomg 2 года назад

That is my issue too. Did you figure out a solution without having to order a new door?

@jtm461 2 года назад

@@meormsbyomg Same issue with mine after I bought the part. I was able to attached the spring to the metal part of the door to the right of where that hole is. Works fine.