Sasha's XJ Lost its Brakes! Jeep Cherokee front brakes

Просмотров 3,8 тыс.

% 179

Break Bleeder kit: amzn.to/3RbtnAu
Complete Front Brake Kit Jeep Cherokee XJ 1990-1999:
amzn.to/3E8WtsR
Not the kit I used in the video, because I had to get parts quickly from local supplier. I have used these Power Stop Extreme products in the past and have been happy with them. If I had time to wait for shipment, I would order these.
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
www.patreon.com/JeepSolid
JeepSolid Merchandise: Hats, Shirts, Mugs, etc: ru-vid.com/show-UCkjnA7clTdKtYDBHsxBxodQstore
👨‍🔧 A few of my favorite tools 👇
OBD2 Scanner. Must have tool: amzn.to/3arRurY
Pro-Lift 3ton Jack Stand: amzn.to/2RU6rGa
Pro-Lift 6ton Jack Stand: amzn.to/33R9epj
3 Ton Jack: amzn.to/2S5obyJ
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver. amzn.to/3pvOi5T
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: ru-vid.com
Follow Me!!
Facebook: watchjeepsolid/
Instagram: jeepsolid
Twitter: dale_jeepsolid
Professional inquires from businesses: email me at dale@jeepsolid.com
#jeep #jeepwrangler #jeeprepair
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

Авто/Мото

Опубликовано:

25 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@kevindavis3456 10 месяцев назад

I’m glad you replaced both. Always replace in pairs.

@JeepSolid 10 месяцев назад

Yes! Thank you

@maloucustoms 10 месяцев назад

Just some advice, In most cars, a brake bleeder sequence starts with the passenger rear wheel, the driver rear wheel, the passenger front, and finally, the driver front. However, always follow your owner’s or service manual for the correct sequence.

@veganoverlander 10 месяцев назад

Brakes are usually bled starting with the wheel that is furthest from the master cylinder and working towards the wheel closest to the master cylinder. This prevents bubbles in the system being forced into pipes towards wheels that have already been bled.

@JeepSolid 10 месяцев назад

Yes. Thank you for correcting my mistake.

@michaelrichards669 3 месяца назад

Awesome to pass on the knowledge to children and grandchildren later on. My grandfather was a Diesel mechanic for the Railroad and could tear down tractors and put them back together. But sadly he never passed that onto any of grandkids. My father would only work on his Van or cars if BROKEN.(which meant a day or two) and too busy to have us kids help him.

@JeepSolid 3 месяца назад

Yeah, it’s sad when parents are ‘too busy’ to spend this time with their kids. My parents didn’t teach me anything about mechanics. Had to learn it all on my own. But that doesn’t mean I can’t teach my kids! It’s valuable time

@michaelrichards669 3 месяца назад

@@JeepSolid I agree.... RU-vid and just quick internet search has so much. Trying to get my Son to learn just a little bit each week.

@roccom5988 10 месяцев назад

Great job.

@JeepSolid 10 месяцев назад

Thanks

@BroncoSolid 10 месяцев назад

wtg Sash!

@JeepSolid 10 месяцев назад

Thanks

@dg98adams 10 месяцев назад

I hate the hard line to rubber connection but always try to do brakes hoses when changing calipers…. But I noticed my 99 Cherokee (picked up last month) had the “notches” in the knuckle too so I guess that I’m going to pull the calipers back off and take care of it next opportunity. Glad to see Sasha involved.

@JeepSolid 10 месяцев назад

Thanks! Seems like there is always something to do. Haha

@MikeH_41-33_LII 10 месяцев назад

Pretty sure the TJ and XJ share the same platform so this would apply to a TJ too. Thanks Dale!

@JeepSolid 10 месяцев назад

Cool. They are super similar in many ways 👍

@Louis-pe2sp 4 месяца назад

Sasha are so cute ❤

@ARNO900RR 2 месяца назад

Remember People when doing brakes in your Jeep You will need a welder.😅 Almost everone has notches on the knuckle yokes.

@jackcollins2344 10 месяцев назад

I was always told to start at the farthest away from master cylinder to bleed brakes. I will try your thinking next time working on my brakes

@JeepSolid 10 месяцев назад

Yeah. I believe the correct way is closest first, but I’ve been wrong before. Logic in going closest first is if you do furthest first, but still have some air in a closer line, it can bleed into the further away line . Kinda like sucking on a straw with a hole in it 🤷‍♂️

@jackcollins2344 10 месяцев назад

@@JeepSolid I agree with your thinking because to me that makes sense

@JeepSolid 10 месяцев назад

You were correct originally. I’ll be changing my way of thinking about this. Most common to start furthest away. Adapt and learn for me 🤗

@jackcollins2344 10 месяцев назад

@@JeepSolid life is a learning experience as long as we are willing to learn. I'm always learning at age 70.. I enjoy watching your videos

@-_-John-_- 10 месяцев назад

✅️

@jeeperguy4290 10 месяцев назад

I didn’t see the link for the brake bleeding tool? Can you post that? I’m needing that tool!

@JeepSolid 10 месяцев назад

here ya go. amzn.to/3RbtnAu

@jeeperguy4290 10 месяцев назад

@@JeepSolid thank you!😀

@kidd7359 10 месяцев назад

Front and rear are on separate systems. If your vacuum bleeding, I wouldn't think it would matter where you start. Pumping the pedal bleeding???

@JeepSolid 10 месяцев назад

Separate systems? The lines all come to the same master cylinder

@kidd7359 10 месяцев назад

@@JeepSolid front and rear are completely independent. Have been for safety

@reggienorris3407 10 месяцев назад

I have a 1991 jeep Cherokee XJ 4.0 no start done replace almost every sensor today I put on a used ECM off of a XJ just like mine and it still won’t start it started up Sunday but haven’t since new coil new crank sensor still nothing

@JeepSolid 10 месяцев назад

Not sure what all you have looked at, but I start with Spark and Fuel. Make sure each plug has good spark, then I test fuel pressure. Maybe spray a bit of starter fluid in it to see what it does.

@theman-qu2hl 4 месяца назад

Fuel pressure regulator located inside fuel pump housing or on fuel rail.

@irishguy8208 10 месяцев назад

Dale: Another great video. Nice that your girl is interested in working on cars. Most kids now a days don't even know how to change a flat tire or care to learn. You need to get Sasha a pair or two of clear safety classes, have her keep one in her own car. Not a dig, she just needs to learn the right way to work on a car. When she was underneath the car looking up without safety glasses on UGH.

@JeepSolid 10 месяцев назад

You sir are totally right 👍 I’m usual really good about safety gear, but totally missed in this case. I guess I wasn’t expecting her to go at it from underneath. I’ll be more attentive next time

@nopoohfan7112 10 месяцев назад

Disposable gloves 🧤, then she does not worry so much about grease getting on the pads and rotor.

@JeepSolid 10 месяцев назад

Sometimes I use gloves, but I then worry about touching a greasy part with the glove and then contaminating the pad 🫤

@nopoohfan7112 10 месяцев назад

@@JeepSolid use disposable then change them when installing post grease. The harbor freight ones fit tighter, they have different sizes. Just my suggestion.