SAVE $$! How to INSTALL Your Own Depth Finder! Flush Mount, In Dash, EASY! Garmin UHD 93SV Install

Подписаться 8 тыс.

Просмотров 67 тыс.

50% 1

If you want to UPGRADE your depth finder to CATCH MORE FISH, we'll show you how! Step by step, here's HOW TO INSTALL your own fish finder, flush mount in the dash. Aftermarket depth finder installation can seem intimidating, but its really not hard! In this video, we'll show you every step of the depth finder installation, an EASY WAY TO RUN TRANSDUCER CABLES through the hull, and how to install a transom mount transducer. You can do it - NO NEED TO PAY a bunch of $$ to have it installed!
We just installed a new Garmin UHD 93SV in the dash of our boat, and we can't be more excited to try it out! Make sure to hit the subscribe button to catch the upcoming overview and honest review of this Garmin after we test it out!
------------------------------
Perfect your Wild Game Recipes with amazing seasoning, sauces and rubs from PS Seasoning! Use offer code WOODS2TABLE for 10% off at: www.psseasoning.com?aff=21
Outdoor Gear & Supplies at GREAT Prices from Aventuron - www.avantlink.com/click.php?t...
If you like AWESOME Camo, high quality hunting clothing made in the USA - check out Blackstock Clothing: blackstockclothing.com/ Use offer code WOODS2TABLE20 for 20% off your order of $35 or more!
This is not a paid promotion. However, if you use the links above to purchase a product, we may receive a small commission at no cost to you. It sure does help us out and helps us produce more videos like this in the future! We thank you for your support!
------------------------------
Be sure to follow our story!
/ woods2table
/ woods2table

Опубликовано:

21 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@thehogpin4044 2 дня назад

You state you can’t use a jig saw, but you use a 1 foot hacksaw blade. Still awesome install and great installation.

@craigrafferty4159 Год назад

I have the same boat and want to add a second 7-inch screen. This video helped a lot, still trying to figure out how to mount it with the windshield. Thank you for sharing.

@farisfayedalshebani 10 месяцев назад

In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens ru-vid.comUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.

@day-cinvacuums5909 2 года назад

Now that I've seen you ran a home made snake to pull that transducer wire (coat hangers) I'm more confident in doing the same using an electrician snake . Really liked how you showed hooking up the power to an existing electrical power strip in the console. Thanks again.

@Woods2Table 2 года назад

that's awesome! thank you for watching and supporting our channel!

@4spdragtop 2 года назад

Thanks, just bought a new EM95SV, so this was and will be a help. Tight lines!

@Woods2Table 2 года назад

that's awesome! and thank you so much for your support!

@rharan1 2 года назад

Very well done! I am installing the same unit in the dash but did not know the screws mount from the front Vs the back which would have been a huge effort. That tip alone saved me many headaches.

@Woods2Table 2 года назад

awesome! thank you very much Robb! and thank you for watching.

@5acrelivingprojects Месяц назад

Thank you, very informative!

@user-zw9ri2sg7i 10 месяцев назад

Great Job !!

@Marioci 2 года назад

Great video! Keep up the good content bro 💪

@Woods2Table 2 года назад

Thank you so much!

@-rarmitage2671 9 дней назад

Great install video. How did you end up liking this unit? Maybe I missed it, but I didn’t see a review video.

@f.a.r.outdoors6094 3 года назад

Good video brother

@Woods2Table 3 года назад

as always, thank you very much!!

@douglasgottschall2883 2 года назад

Before leveling the install pattern be sure boat is level.

@Woods2Table 2 года назад

Good call out...

@premiumyum3025 11 месяцев назад

was thinking the same thing!

@jamesevans2539 7 месяцев назад

Great video. Thank you very real honest experience. I have the same boat…love it. Looking to add the same graph. Are you happy with the transducer placement you used? Does it work when the boat is on plane or only when at a troll / search speed

@stephenm22100 Год назад

Is the Cv version basically the same thing minus side view? Thanks

@prowannab Год назад

Mmmm The screen looks crooked. Just kidding looks great! Thanks for the video, Really helped a lot.

@astroj8549 6 месяцев назад

You should of explained how that sensor that you hooked at the bottom back of the boat is what finds the fish

@coachrandall8190 Год назад

when you put the positive wire to the fuse. Is it the black wire that you attach to the ground screw. I got my first boat and I am unsure about hooking up my fish finder.

@r.waynejohnson9968 9 месяцев назад

on marine dc systems, red is always positive, and should be fused. black returns need no fuse. If you don't have a battery switch, you need to get one. When turned off, all battery drains are prevented. Pacific Yacht Systems has super tutorials.

@rickwilliams6922 Год назад

I'm installing the same unit on the same boat, my 93 uhd dont have holes in the corners of the graph to screw it in like yours, I'm I missing something? Tks for the video.

@Woods2Table Год назад

There should be a cover plate you can remove that will expose the holes. I had the same problem until I found it referenced in the manual. Do you have the paperwork that came with it? If not, DM us on Instagram.

@garyritterstrings 2 года назад

Remember not to use just regular silicon to seal. It must be marine grade waterproof silicon or you will sink your boat.

@toulialee82 2 года назад

Great video. Gives me idea how to install transducer on my 2021 z19 sport. Ty

@Woods2Table 2 года назад

Thank you very much!

@toulialee82 2 года назад

Have you tried any portable mounts. Really hard to decide to drill into my fiberglass

@Woods2Table 2 года назад

@@toulialee82 I have not. But I am also very hesitant to drill into the gel coat. If you do it carefully and take the proper precautions, you can do it without extra damage.

@greguke 2 месяца назад

Have the same boat and changing the hook to the Garmin 93sv like you did. Are you happy with the location you put your transducer? Any issues with that location? And how many p clips did you install for the transducer cable to the transom? Thanks.

@AlThePal78 Год назад

I was wondering where I was going to connect my stuff too, but I was told maybe you want it on a switch so it don't run even when the vessel is off. Like connect to bilge switch

@r.waynejohnson9968 9 месяцев назад

Only a very few specialized devices should NOT be downstream of the battery switch - such as a boat which is left in the water all the time and needs a continuous bilge pump to drain rain water. The battery switch prevents battery drains when the boat is not in use. The wiring should be: battery positive lead to battery switch, then to master fuse (size per bus bar capacity), then to the positive bus bar, then to switch panel. The device is then wired into the switch panel and can be turned on and off at will. The negative return to the battery does not need to be switched, because if the positive current is broken by the switch, no current can leak. The battery switch prevents someone from turning on devices and draining the battery.

@chacon5641 2 года назад

On the power cable it’s a total of 4 cables, + and - BUT it’s 2 more skinnier than +and - one. Where’s those Cable will be Connect?

@freemanlove6741 2 года назад

I just bought a Garmin 93SV for my boat project. My local marine supply store recommended running power from my Blue Sea fuse block. Another trusted source recommended running power strait from the battery with 10 gauge wire along with an inline fuse. Any suggestions?

@doubled1641 Год назад

Wire size is a function of current over the given distance. So look in the literature to see what kind of current the unit draws and then measure the distance. All kinds of tables online to calculate correct wire size.

@r.waynejohnson9968 9 месяцев назад

The trusted source is wrong. Only a very few specialized devices should NOT be downstream of the battery switch - such as a boat which is left in the water all the time and needs a continuous bilge pump to drain rain water. The battery switch prevents battery drains when the boat is not in use. The wiring should be: battery positive lead to battery switch, then to master fuse (size per bus bar capacity), then to the positive bus bar, then to switch panel. The device is then wired into the switch panel and can be turned on and off at will. The negative return to the battery does not need to be switched, because if the positive current is broken by the switch, no current can leak. The battery switch prevents someone from turning on devices and draining the battery.