Sawstop Brand Dado Blade Review Test on Sawstop PCS and Laguna F2 tablesaw. Woodworking dado stack

Подписаться 14 тыс.

Просмотров 6 тыс.

50% 1

Full test and review of the new Sawstop brand woodworking dado blade. Here I look at this new dado stack and compare it to the Infinity Dadonator, Dewalt DW7670 ( 7670 ), Ridge Carbide Northwoods (North Woods) dado, and Whiteside Plus dado set. How does the new Saw Stop dado blade set stack up against the current competition? Follow along as Willie Sandry the Thoughtful Woodworker takes you through a full test drive of this new tablesaw dado blade set. What are the new dado blades best new features, and what features missed the mark? Full item name SawStop BTS-DS8-2402 8" Premium Dado Saw Blade Set
Infinity Dadonator... amzn.to/3N1a88n
Sawstop Dado Blade... amzn.to/3JEo9qF
Ridge Carbide North woods Dado Master... amzn.to/37vlFfS
Dewalt DW7670 Dado Set... amzn.to/361GD5T
Whiteside Plus Dado Blade... amzn.to/3IkPH2E
Or shop my entire curated collection (Shop Tested) on The Thoughtful Woodworker Storefront…
www.amazon.com...
As an Amazon Associate I earn commissions, and am grateful for your support.
#woodworking
#sawstop

Хобби

Опубликовано:

18 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@guitfidle Год назад

Thanks for the honest review! The plain steel shims are there for a reason. The SawStop wants conductive blades to detect skin contact. If you had plastic shims it would isolate the blades and chippers from each other possibly interfering with detection. Also note, SawStop does NOT recommend using that Infinity Dadonator set or any other set with disc shaped chippers. There is enough extra mass in those chippers that it can damage your saw if you have an activation. (bent arbor shaft or worse)

@TheThoughtfulWoodworker Год назад

The new Dadonator XL does meet Sawstop guidelines, but you are right the original Dadonator does not. Thanks.

@seanb1321 Год назад

Thank you what a great review. I wish for box joint performance, however.

@matteason989 2 месяца назад

Can you recommend a magnetic shim set that will fit in the case?

@TheThoughtfulWoodworker 2 месяца назад

I use Forrest magnetic shims. I don't know if they fit in the case, I keep them in my TS cabinet. I think they're larger diameter than most steel shims. Best.

@TravisKlein1 Год назад

thanks for this in depth review. can I ask you why the full sac fence isn't that a bit dangerous, why not have it stop short of the blade cut so you can measure your stop then push the miter through without any chance of forced coming from the right side

@TheThoughtfulWoodworker Год назад

No problem. I also have video reviews of the Infinity Dadonator XL and Whiteside Plus dado blades. Good luck deciding on you next blade!

@stewartperry7797 2 года назад

Good review.

@TheThoughtfulWoodworker 2 года назад

Thanks Stewart!

@dougpatch3117 2 года назад

Does your Infinity Dado stack work well on the SawStop? Helpful video - thanks!

@TheThoughtfulWoodworker 2 года назад

Hi Doug, Yes the Infinity Dadonator is the best dado stack I've used in terms of cut quality. It does cut well on the Sawstop, although it's not exactly approved due to higher weight and tooth style etc. Best

@dougpatch3117 2 года назад

@@TheThoughtfulWoodworker Thanks much!!

@numerousactuary6640 Год назад

@8:58 10 1000ths of an inch?! Thank goodness it wasn’t 2/32 or even 4/8ths!

@TheThoughtfulWoodworker Год назад

It looks like you caught me in an improper fraction. Good catch.

@numerousactuary6640 Год назад

@@TheThoughtfulWoodworker now I can’t trust anything else you’ve said in this video. Just kidding. Good stuff. Couldn’t help myself

@TravisKlein1 Год назад

@@TheThoughtfulWoodworker I don't understand the problem. You said 10/1,000 of an inch or 1/100 isn't that measurement you noticed? what is wrong with that fraction?

@TheThoughtfulWoodworker Год назад

I don't think there was anything wrong with it technically. The guy commenting didn't like that I called it thousandths but I tend to think in thous instead of hundredths of an inch. Thanks.