Schluter®-DITRA Over Wood in a Bathroom (Part 1) - by Home Repair Tutor

Подписаться 605 тыс.

Просмотров 1,1 млн

50% 1

Cracked bathroom tiles and grout stink...REAL BAD!!
For more home improvement tips visit www.homerepairtutor.com/👍🏼
One of the best ways to prevent this from happening is to install DITRA underlayment over your bathroom wood subfloor. Look, you might be thinking about using cement board but I'm hear to say think TWICE...just saying.
Primarily because cement board is heavy, adds height to your tile installation, and needs to be waterproofed. I've used it before and totally understand where you're coming from...it's cheap.
But that doesn't make it the best choice.
DITRA has been out for a long time and most professionals use it because it will prevent tile from cracking, it will be easier to install, and it will lessen the height between your tile adjacent flooring.
PLUS you can make your entire tile floor waterproof if you install DITRA the right way.
Today's video is a Part 1 of 2 and shows you how to install DITRA on a wood subfloor. Follow our directions but don't skip reading the DITRA instruction sheet that comes with your roll.
You'll also want to get DITRA and KERDI trowels. Find them on Amazon or your local tile store.
Part 2 of this video can be found here
• Schluter®-DITRA Over W...
If you have a question ask it down in the comments, we'd be happy to help
By the way, if you're looking for how to install Schluter KERDI-BOARD we made these two videos
How to Install Schluter KERDI-BOARD Part 1
• How to Install Schlute...
How to Install Schluter KERDI-BOARD Part 2
• How to Install Schlute...
For supplies and tools used in this video, please consider these links to our store and affiliate links:
1. Schluter Ditra (54 sft roll) - amzn.to/2iTQVZP
2. Schluter Ditra (150 sqft roll) - amzn.to/2Bqi5zo
3. Kerdi-fix sealant - amzn.to/2iUqDqr
4. Kerdi Band (for seam) - amzn.to/2hWlsWc
5. Ditra Trowel (to embed ditra) - amzn.to/2hTb4OP
6. Kerdi Trowel (to embed kerdi) - amzn.to/2zpHNCD
7. 12" grout float - amzn.to/2BqkLNs
9. Milwaukee Angle grinder - amzn.to/2iSa4vc
10. Dewalt diamond blade - amzn.to/2Bofp54
11. Bosch hole saw (1 3/8") - amzn.to/2zs1NV9

Хобби

Опубликовано:

22 фев 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 434

@hamb7260 2 года назад

Awesome job installing Schluter. The only suggestion I have is never push the nail back in. Take the nail out and apply wood screw ensuring that nail won't pop back up and put a hole in Ditra. Great job man!

@jstoltz6576 4 года назад

Thank you, most thorough tutorial I have found. I have been searching videos for weeks trying to get a detailed tutorial. Great job.

@InsanelyGhostly 3 года назад

Buy their repair tutor videos, $99 it’s worth a $1,000,000

@andreasmiller5448 2 года назад

Good video. I actually just finished a Ditra membrane installation today after watching this video in the morning. It worked perfectly!! Thanks.

@bamarich 9 месяцев назад

Thank you very much for the explanation of why you chose to use the Ditra membrane. I have been vacillating over which route to take because my subflooring is 3/4" plywood, 16" OC. Your sound reasoning has convinced me to go this route. I am about to tile our dining room, kitchen, and master bathroom floors using 12"x24" porcelain and it makes perfect sense to use a waterproofing membrane. I will need to use a self leveling product in a spot or two, but I'm definitely going the Ditra route - appreciate it!

@yeowzaa007 8 месяцев назад

I wouldn't take the chance with 24" tile with only 3/4" subfloor. Code requires a min of 1 1/8" thick subfloor because of deflection. Ditra doesn't add any strength just deals with expansion and contraction.

@michaelschnell5874 4 года назад

Great video! Thanks a lot for posting you guys, I’m doin this step tonight!

@HomeRepairTutor 4 года назад

sweet, let us know if you have any questions

@doyle4170 5 лет назад

The most important thing for professional installers is do the job fast and move on to the next job. They use this type of product for one reason only - it's fast and easy to apply. Cement board is more durable and less likely to flex with the sub-floor, but cement board is heavy and takes two to three times longer to install. Over time Ditra will break its bond with the sub-floor.

@josephgrn2818 5 лет назад

There's a separation layer to allow for movement that cement board does not. Prevents tiles from cracking. Especially when installing over concrete floor (which will crack and transfer crack to tile)

@TopNotchTile 4 года назад

How the hell does it loose bond you need to try tearing some off once .. ditra has been around since 1975 if it was so bad I think ditra would have died

@daveluke5416 3 года назад

Thanks, dude! This video and part 2 really help me use the Schluter system in my bathroom remodel... the use of the kerdi band around the bathtub was indispensable!

@dakarigregory2444 2 года назад

you prolly dont care at all but does anybody know of a tool to get back into an instagram account..? I somehow lost my password. I love any tips you can offer me

@killiankairo4176 2 года назад

@Dakari Gregory Instablaster =)

@dakarigregory2444 2 года назад

@Killian Kairo i really appreciate your reply. I got to the site through google and im waiting for the hacking stuff atm. Takes a while so I will get back to you later with my results.

@dakarigregory2444 2 года назад

@Killian Kairo It did the trick and I actually got access to my account again. I am so happy! Thanks so much, you saved my ass!

@killiankairo4176 2 года назад

@Dakari Gregory you are welcome =)

@ericdavenport269 3 года назад

Great video ! I'm getting ready to do my first tile floor in a whole bathroom remodel. This was a great video very good info. Any other tricks to install the detra that wasn't shown in the video

@TheJJclips 8 лет назад

Thanks Jeff and Steve. These videos a terrific. Really helping me out with my bathroom project that I am just starting!

@HomeRepairTutor 8 лет назад

thanks, got your email, too. Hope you're still getting our tips in your inbox. What all are you doing this week?

@TheJJclips 8 лет назад

Have to have a drain moved from existing bath/shower combo to a shower and soaker tub so met with a plumber friend to discuss options. Will start demo this weekend.

@dpanster19 6 лет назад

thanks for the video. couldn't tell if you left the 1/4 expansion gap when you installed but the second video shows it clearly.

@HomeRepairTutor 6 лет назад

Yes, that expansion gap is very important. Thanks for asking

@nitemox Год назад

Thanks, just what I needed.

@martindagoberto7165 2 года назад

great video! most helpful

@roscoewhitejr5621 Год назад

Shutler all set works great

@benzun9600 5 лет назад

still useful. thank you

@MrMiss 4 года назад

Hi mate. Awesome video. If I have wooden floorboards, do I need to apply 5mm ply Screwed down before putting the Ditra matting?

@rickmiller8928 2 года назад

I am getting ready to tile my upstairs bath. The flooring is 2x6 tongue and groove. It previously had mortar and wire mesh. All has been removed and I have been told to put a layer of 1/4 hardy over thin set. I'm not sure I shouldn't put plywood instead. Most videos do not reference 2x6 subfloors.

@imout671 6 лет назад

My tile guy did 4 apartments for me 8 years ago with this and I've used it ever since. I've never had to go back and fix cracked tiles or grout. The floor was 16" centers, 16' span, 1/2" plywood with 3/4 mdf. I pulled up the 40 year old mdf and put down 3/4 plywood so my floor was 1.25" thick when he put the tile down. Other floors were just 3/4 plywood. Detra has always worked

@katc7765 6 лет назад

I am about to tile my bathroom floors which are only 3/4" plywood over 16" spaced joists. Problem is that plywood has glue on it from previous vinyl. The glue is difficult to remove. (I had to remove the vinyl due to some repairs that needed to be made due to a leaking toilet.) Would it be advantageous to screw down another piece of floor to put the ditra down on or will the modified thinset stick to that 3/4" plywood in spite of the remnants of glue?

@glenniceburns4794 3 года назад

Hi. Thanks for the video. You answered in a previous question that this technique and product can be used on linoleum. Do you still use unmodified thinset?

@sumonsbd 4 года назад

Good video, I am doing my basement bathroom. I am planning to have dmx on concrete floor then 5/8 osb on top dmx underlayment to make the subfloor. Here I have 2 questions: 1. Do I need to use self-leveller on concrete first or over the OSB? 2. Can I just put the tiles over osb not using the This Ditra? Any suggestions will be appreciated.

@matthewotis3594 13 дней назад

Its great stuff. And if you tear out a shower and theres nothing behind it (which there normslly isn't ) you can run that go board unstead oh hardy board. Love thst stuff too. Even though it eill eat you up if not careful.

@IvanTubing 5 лет назад

Waterproofed with "Redgard" or "Aquadefense" Done! But years ago when Isolation paint hasn't be created yet ...everything I did remains greatly till now🤔

@7628739 2 года назад

Good vid, but I think it is wise to protect the tub, also 1/4 wood strip would help also with liteweigt cardboard.. keeps any accidents at bay. , just a suggestion. Can you use a roller on top to help it embed better?

@brentdreamer2025 7 месяцев назад

I am doing my cabin bathroom with in floor heating and I have the Schluter Ditra mats (2x2). I noticed the mat you put down doesn't have the little "nubs" for the wiring to attach to, is this a different style for in floor heat set up? I do really like the way you described everything to be done and the voice over helped as well. Great video guys.

@kapepper6426 4 года назад

informative! Thanks.

@nickdefelice7379 6 лет назад

Home Repair Tutor im doing my bathroom soon and im useing small tiles that are 3x3 inches do you have any videos for that kind of insulation

@JohnSmith-hl4bb 4 года назад

I always got full cover very easy when I apply underlayment sealer over the plywood before thin set and Ditra, let me know is it the right way doing it or not but seem working fine, no call back.

@salvor1 Год назад

on wood plywood, wow. this is good because I already know how to install it on other kinds of plywood.

@brianattitude 2 года назад

Also, recommend dampening the felt later underneath the Ditra before laying. This will help it bond to the thinset

@typ044 9 месяцев назад

It definitely won't. The only reason you wet the substrate is to keep it from prematurely pulling moisture from the thinset. Wetting the plastic "fleece" isn't going to do anything except take extra time and labor.

@anthonymorsillo2638 6 лет назад

I flattened my wood subfloor. It wasn't much so I used thinset to build it up. My question now is do I still use modified thinset to install my ditra to the subfloor?

@harryc7651 3 года назад

Clarifying question, because the terms subfloor is often misinterpreted. I have a 23/32 subfloor screwed directly to the floor joists. Will I be able to lay mortar, then Ditra, mortar, then tile directly onto my 23/32 subfloor or do I need an additional layer of plywood?

@randalunderhill831 6 лет назад

Is it a no go to apply the thin set onto a painted substrate? I had a small mold issue and put a coat of a special mold control paint where I had cleaned it up

@angie05051916 Год назад

Would applying a thin coat of PVA to your ply surface first, be helpful or detrimental to the ditra installment?

@vigneshsan7976 3 года назад

Is this something that can be directly installed on subfloor or do i need to add a 1/4 inch or 1/2 inch particle board/ply wood on the subfloor bathroom?

@AMERICANA-BOOMSTICK Год назад

Thanks for this

@quinnhooper5103 3 года назад

Thank you great vid

@guillemarin8387 8 лет назад

Another great video! Steve, knee pads Steve!!! :)

@HomeRepairTutor 8 лет назад

lol, funny thing is we had them but didn't use em

@jessedaniel6040 3 года назад

Hi p

@ericwhitelock7250 3 года назад

if the subfloor is tong and grove 3/4" material will this require any different prep say for nots or cracks in the subfloor its self

@deboracahoonmusic5629 2 года назад

So after I finish prepping the floor with all the steps shown in the video, what mortar would I use to put bigger porcelain tiles on the floor? Modified or unmodified?

@justanotherchannel6097 2 года назад

With the ditra, thinset and tile what’s the final thickness you achieve ? Trying to match thickness or 3/4 engineer flooring with no transition piece

@butrintiny3201 3 года назад

Use unmodified thin-set mortar meeting the requirements of ANSI A118 for bonding to plywood.

@anonymous4298 3 месяца назад

According to the installation instructions use ANSI A118.11 modified thin-set over plywood All-Set or Fast-Set is good

@alejandromejia8889 5 лет назад

Thank you for a great video tutorial. Would you mind clarifying something for me please? The thinset recomend by the manufacturer to bond the membrane is modified or unmodified? Thank you so much. And please keep making more great videos.

@HomeRepairTutor 5 лет назад

Schluter recommends modified when setting Ditra over wood subfloors but you can use their ALL-SET both under and on top of Ditra and Ditra-Heat. Mix thin-set per their directions to get the right consistency, ensure 95-100% coverage to the fleece. Also, use the correct trowel and directional troweling to compress all the ridges.

@paulleblanc7384 4 года назад

Home Repair Tuto

@ChrisCox-wv7oo 3 года назад

From their FAQ : "The thin-set mortar used for bonding KERDI must be appropriate for the substrate, and it must penetrate and engage the KERDI fleece. Generally, Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or UNMODIFIED thin-set mortar is used." But from this video (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wMzXu1NRMAM.html), and from the installation instructions on the website it shows modified thinset below the membrane, unmodified above the membrane (below the tile) sccpublic.s3-external-1.amazonaws.com/sys-master/images/h7a/h5d/9019679637534/Uncoupling%20Data%20Sheet.pdf

@HomeRepairTutor 3 года назад

@Joe Dirté use the DITRA trowel for bonding DITRA and the other trowel depends on your tile size, which is?

@freddycugarjr Месяц назад

You must have ball bearings for knees

@sediqullahmohmand1337 3 года назад

Thanks for the video, do I have to screw the ditra for more fastening?

@Teleman01 4 года назад

SO EXPENSIVE to use this stuff. But it is very nice.

@teakamccarthy4943 4 года назад

I wonder if the direction of the Ditra matters in a bathroom? Is it better to lay it with the joints in certain direction?

@rgarcia8567 Год назад

Would you recommend removing the primer overspray from the subfloor before applying the thin set?

@josehafer6536 Месяц назад

It’s only for subfloors if it’s a slab, pour south level to level your floor, then lay your tile with thin set

@nmlindon20 2 года назад

To be honest if you have toilet overflow that membrane wont help that much you will see water downstairs.But protecting from tile cracks will work just perfectly

@topkarenflooringdiy2728 2 года назад

Very good

@alphonsemeunier6188 5 лет назад

Can this system be used in a repair project where the rest of the floor does not use DITRA?

@icawn 6 лет назад

Hi. I used leveler over my plywood. After walking on it, there is a hairline crack over the plywood seams. Is it still okay to install ditra or strata_mat? thanks.

@64422ar 2 года назад

I have another bathroom that has an old plank subfloor, can you just thinset over it and use this or is it best to use something else?

@bsfbestshortfilmsonyoutube 2 месяца назад

HI ✋️is there a multi purpose adhesive for sticking down decoupling waterpoof membrane and also using stick down tiles onto😢 membrane? Using the same adhesive?

@21gonza21 3 года назад

If you use self leveling on your subfloor will this bond to it?

@judithaudin889 8 лет назад

Would this installation method work of an oriented strandboard subfloor as well as the plywood?

@youtubertoo 7 лет назад

Hey guys, thanks for the very informative video! I have removed existing tile/backer down to bare plywood. The floor is for a small kitchen in an older apartment building. I need to level the floor out but once I have my self-leveler down can I bond the Ditra directly on top of the self-leveler? Thanks in advance.

@HomeRepairTutor 7 лет назад

You should be fine as long as the self-leveler is complete dry. Use Schluter's ALL-SET to bond the DITRA to the leveler and follow the mixing directions to a 'T'. They have different water requirements for the DITRA.

@peterholliday8261 4 года назад

Can you use Schluter®-DITRA over a hydronic floor system that includes 1/2" wood system, (Viega) with pex tubing grooves?

@ronellwalker9463 Год назад

Two questions: I have screw holes in my plywood from old particleboard that was installed over my subfloor should I fill those holes with wood filler/kwikwood or something before I put the thinset on? I also have some places where the plywood is chipped and dented, how should I level it?

@user-nc2cd6vm1j 8 месяцев назад

Should you install the membrane over a wood subfloor partially covered with linoleum adhesive and backing?

@markbrown4827 8 месяцев назад

When do you use the Kerdi versus Ditra? Also, for either do you use the kerdi band at all seams and against the wall?

@user-xx4ln2ij6o 6 лет назад

my house is old but well built. The floors are tongue and groove 2X6's. What type of underlayment does a tile floor need? Cement board? Plywood and Cement board?

@karlhockless771 6 лет назад

What happens if 1. Ply delaminates 2. Adhesive doesn't stick to the ply? And, he has put down 18mm ply? This is a big step up compared to 6mm NoMore Ply.

@andreicotorobai731 4 года назад

Hi, may i ask please what powder glue you have used for fixing ditra. thanks

@markanderson5619 2 года назад

What if you want to install porcelain tile into connecting rooms. Their is 3/4 plywood in first room and tongue &groove oak in second room. Both are flush.

@williamessex3518 5 лет назад

Quick question: If you have to leave a 1/4" gap from the wall to allow for expansion and contraction, why are the seams butted against each other? Why is there no gap for expansion and contraction between sheets?

@TopNotchTile 4 года назад

Uncoupling is your answer ..the Gap is for tile more than anything else

@sirramsey357 2 месяца назад

Question: if I have a wood subfloor that is slightly out of level, should I put down a self leveling solution before adding thin-set for the Ditra??

@holland6648 5 лет назад

Can you use ardex x77 for under the ditra? And also over ditra or is ardex fb 9L better for over? Went to the tile shop and the owner got me al confused

@abacab87 2 месяца назад

I've heard others say this as well, I've had a terrible time getting the mud to bond to the underside of the ditra. I ended up having to back butter the ditra to get a 100 bond. I first did everything by the directions and the first time I had near zero percent bond, it just pushed the thinset down into the shape of the individual cells of the membrane (ditra heat) I put the thinset down quick, and I put the maximum amount of water in the mix (according to the back). Not sure if the extra work is worth it vs how we did it for decades before.

@HomeRepairTutor 2 месяца назад

That shouldn’t be the case, I highly recommend watching this video for more details on how to properly install DITRA ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VQbEcXBnMoU.html

@vincentrodriguez6785 5 лет назад

How do I tile over a raised foundation floor?

@giuseppemare 6 лет назад

I used a trowel to embed and next time I have to say it's better to roll it. The trowel is way to hard. And yes mix it with the maximum amount of water allowed.

@ericreitler46 2 года назад

If I have 4 inch wide angled boards as sub floor do I need to put another layer of plywood before the ditra

@number1pappy 2 года назад

Would this work in a modern 1 year old mobile home with 2x8 joist 16 inch on center with 2 layers of 3/4 inch tongue and groove treated plywood subfloor?

@dwayneh372 5 лет назад

Same here I thought you had to use unmodified mortar , that’s what I use when I did my bathroom

@dwayneh372 5 лет назад

jimjd1969 no use ceramic tile and my floor is great, it’s been little over a year and it’s great so far .

@a.l9313 5 лет назад

Can this be used over plywood subfloor in a kitchen prior to file instalation?

@johnysilver1853 3 года назад

What kind of thinset do you recommend to use to lay Ditra on? What is better Redguard or Ditra?

@supermanreturns23 Год назад

I am laying down 24x24 italian porcelain tile. The mortar for this is for heavier tiles, can I use the same mortar for tile to unite the ditre to the 3/4 plywood?

@andrewperna3745 5 лет назад

Can I use Mapei uncoupling membrane mortar under the Ditra?

@buddha8087 4 года назад

What happened to the 1 inch distance from the wall and the bathtub? You shoved it all under the drywall and bathtub

@mystic627 2 года назад

Hi can I use Schluter Ditra under octagon ceramic mosaic tile

@benjamess3194 Год назад

Question. If my subfloor is 5/8"thick can I put 1/4" laun board down over it for the tile job?

@Crimsontraum7 Год назад

Hi, would this also be suitable for a walk in shower wooden floor base?

@stanfoos3619 2 года назад

Question, have you installed DITRA over a pine board subfloor, with gaps?

@kermitefrog64 3 года назад

Can this be put over existing vinyl before putting a floating floor?

@pattypatlan8821 Год назад

*******Question******* I bought a roll to redo my guest bathroom and have a ton left over. Could I use this as underlayment for my kitchen floor laminate wood flooring??

@paulblancaflor9171 2 года назад

If your subfloor is not level should I get it level first before installing the Schluter?

@remaxdurham 2 года назад

Thanks Jeff but just a quick observation you say 1/4 of an inch reveal but in the vide your caption says 3/4 inch reveal.

@queenofspadz 22 дня назад

How do you join the two sections? I never see that covered - seems like a failure point for leaks!

@mikeclark1081 6 лет назад

HELP! I am using all Schluter for the first time. I am planning on using Ditra on the bathroom floor, but can't find info on small imperfections to plywood. When I pulled up the old tile, there are a few sections where the surface wood splintered and its plywood, so there are general surface imperfections. Other than that the floor is solid 3/4 plywood. Will thinset be enough to fill these imperfections for Ditra?

@Bluemoonredwine 2 года назад

How long does it take thinset to dry

@jthet2001 7 лет назад

Great video! Any advice what to do around toilet flanges to keep the waterproofing as tight as possible?

@HomeRepairTutor 7 лет назад

+jthet2001 thanks, applying KERDI-FIX between the closet flange and DITRA will make it waterproof 👍

@rachellefifer3999 7 лет назад

Kerdi system

@edouarddesrochers8552 8 лет назад

Your videos are great. Your partner does a great job as well. A lot of DIYers would likely be remodeling. Can the product be installed over a sheet vinyl floor that was glued down and is still in good shape. Ed

@HomeRepairTutor 8 лет назад

thank you, DITRA can be installed over sheet vinyl but it might better to rip it out and make sure you subfloor is in good shape, especially if your floor isn't level...but again, Schluter does have directions for that kind of installation

@giuseppebaltazar6138 5 лет назад

Excuse me while i use my old school tar paper , lath , expanded (or chicken wire), dry pack cement , common & lime, , float & set , while your babysitting your product , with all your just in caser's

@genesavarino6673 4 года назад

DYI here. Completely redoing our 8x8 (not exact) hall bathroom. walls are dwn to the studs and just redid the plumbing to accommodate the new layout. New subfloor is 3/4" Advantech. It is not perfectly level (not terrible) and some joints are 1/8" higher/lower. Using 1/4" Ditra (16" off center joist). to accommodate the transition height. My question is. Does the subfloor need to be perfectly level and do the joint heights need to meet perfectly? Thank you. Great videos.

@HomeRepairTutor 4 года назад

as long as the subfloor is flat and mostly level you should be fine. Under the tub or shower tray it needs to be level so the water will drain properly. You want the DITRA joints to meet evenly with each other. Otherwise the tile setting will be problematic

@genesavarino6673 4 года назад

@@HomeRepairTutor ..Thank you for your time.

@tonyjulien6257 4 года назад

Question:What If the customer wanna do half tile and other half wood

@idaho2ndgens240 7 лет назад

I have 3/4 subfloor on 16 on center joists. The 2x10 joists have valleys and crowns that cause the subfloor to hump and valley. My plan is to put sand down the high points first. Then apply a 1/2 overlayment layer of plywood to stiffen the subfloor for large format tile. What should I use to flatten the subfloor before I install the Schluter Ditra? Can I use a thin set morter and scree it flat or should I use a self leveling compound on top?

@HomeRepairTutor 7 лет назад

You could use a self-leveler to help with the peaks and valleys, Ardex makes a good one. You're correct to get a level floor before the DITRA

@bctiger86 4 года назад

How does this work for slightly unlevel subfloors?

@CoughFee 8 лет назад

Hey Jeff! I'm looking to tile over my stained epoxied concrete floor. Is Ditra a suitable item for this type of project?

@HomeRepairTutor 8 лет назад

hmm, that's s good question. If recommend calling Schluter and asking their technical department this question...bet they'll have a good answer

@dbeaulieu9730 7 лет назад

I personally believe gluing the Ditra rather then using thinset because plywood will soak up all the moisture before the thinset is fully effective. I've used glue and it worked great

@HomeRepairTutor 7 лет назад

+D Beaulieu are you referring to the Ardex adhesive? We've heard it works well. Schluter's ALL-SET is our preferred thin-set now since they formulated it for under and over DITRA

@dbeaulieu9730 7 лет назад

Yes I was and one reason why I really like it is, you don't have to mix it. Its all scoop and go. The second reason is, sometimes with thinset, if you kneel on it, the thinset moves around under your knees and you form mounds. The glue doesn't do that.

@tat-dinamica Год назад

Im going to use Ditra for floor in my bathroom ,can you tell me please, what glu should I use ? Thank you.

@wendellhullett7711 Год назад

Helps to prewet the subfloor with a spray bottle like what he did

@raymonddreichart295 Год назад

Can the Ditra be put over viny floor if the vinyl is down solid.

@michaell4527 4 года назад

Can i apply the ditra on osb wood?

@bradnation773stephens2 5 лет назад

Gotta do this today wish me luck

@HomeRepairTutor 5 лет назад

Awesome!! You got it, looking forward to your success

@bradnation773stephens2 5 лет назад

Home Repair Tutor thanks for the video man came out great

@HomeRepairTutor 5 лет назад

@@bradnation773stephens2 awesome! You'll love that floor when it gets cold

@bradnation773stephens2 4 года назад

Jay Steel came out great bro take your time and do it slow specially if your getting paid for it lol trust me time is key this guy helped me a lot to

@xs6819 4 года назад

My floor is the old 10 inch wide wooden planks and it is rippled in some areas. Can I use the thinset on that then the ditra then vynal planks over that?