Science Behind Using Fire To Mount Car Tires

Подписаться 4,1 млн

Просмотров 9 млн

50% 1

Videos of people lighting their tires on fire using matches and lighter fluid have quickly gone viral. Incredibly enough, this spectacle isn't just for show. It can prove practical in an emergency when your tires have become flat and no longer form a seal with your wheels. This video delves into the science behind setting tire beads that have become unseated, and mounting a tire on a wheel using a controlled explosion.
Warning: Do not attempt.
MORE SCIENCE:
How Spider Silk Could Change The World
• How Spider Silk Could ...
Why We Still Haven't Cloned Humans - It's Not Just Ethics
• Why We Still Haven't C...
How These Flame-Throwing Tractors Kill Weeds
• How These Flame-Throwi...
For more, visit:
/ oceanstatetuning
/ dillonswoodworks
/ westonsummers
/ ichibahn4
/ bleepinjeeppage
/ jrtransport379
------------------------------------------------------
#Tire #Science #BusinessInsider
Tech Insider tells you all you need to know about tech: gadgets, how-to's, gaming, science, digital culture, and more.
Subscribe to our channel and visit us at: www.businessinsider.com/sai
TI on Facebook: / techinsider
TI on Instagram: / tech_insider
TI on Twitter: / techinsider
INSIDER on Snapchat: insder.co/2KJLtVo
Science Behind Using Fire To Mount Car Tires

Авто/Мото

Опубликовано:

19 сен 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@leoncollins8200 5 лет назад

This brings a whole new meaning to Hot Wheels.

@tophatter-qy5rh 5 лет назад

Hot wheels 2

@BigGirl1351 5 лет назад

Or maybe it's because after a lot of driving the rubber gets hot because of friction?

@thatchevydude1234 5 лет назад

Lmao

@dson978 5 лет назад

Man. Whans the last time you had a hot wheels car in your hand

@leonlai5805 5 лет назад

Well hello there Leon

@mikehh8020 3 года назад

I grew up on a farm with heavy equipment (tractors, trailers, implements, combines, semis, etc.). We did this all the time with starter fluid. Some of these people doing it in this vid are dangerously overkilling it with the flammable aerosol.

@bigchungus2667 2 года назад

True that but in our case we replace the air inside with nitrogen before the tractor goes in the fields / trucks go out to haul

@jacepayne7671 Год назад

I’ve tried this before and it didn’t work

@LelakiKerdus 9 месяцев назад

@@jacepayne7671 You need to make sure the flammable liquid goes inside the tire.

@jacepayne7671 9 месяцев назад

@@LelakiKerdus it didn’t work for me because I didn’t have air going into the tire. After I lit it up the bead would fall off

@vart7767 Месяц назад

correct

@lawrencemclaren7099 2 года назад

I used this method for numerous years being a truck and trailer mechanic. I passed it on to my sons breaking down and mounting tires in my driveway. At first they thought I was crazy until they saw the results. Best trick i was ever taught and passed on

@S31Syntax 5 лет назад

"the gas ignites and rapidly expands, also known as an explosion" -mind ignited and rapidly expanded

@hakuryumybeloved4489 5 лет назад

Lmao

@Schlohmotion 5 лет назад

You really have a point here. How comes, that we make 5 Minute videos/animations for the simplest things nowadays?

@wankhairulanuar1784 3 года назад

Mind blowing

@MustafaSahin-cg3lb 3 года назад

Fazla Maula Dani ğşşfaf

@sasakurtovic6850 4 года назад

You always remove the needle from the valve! Two reasons: After the explosion, as the air inside rapidly cools, vacuum forms. This allows the air to come back in so the tire does not slip off the bead again due to the vacuum. Second: In case you use a bit too much fluid and there is a huge pressure inside the tire, the air will have a way to escape rather than to explode the tire itself. So it makes it safer.. Still, rather try a few times with too little fuel than once with too much..

@jarikinnunen1718 Год назад

Explosion depents amount of oxygen in tire. Too much fluid or gas not increase pressure.

@apostolakisl Год назад

@@jarikinnunen1718 Agreed. The most powerful explosion will occur when the air fuel mix is at the correct stoichiometric balance. For example, if you were using hydrogen, you would want 2 molecules of H2 for every single O2. 2 H2 + 1 O2 = 2 H2O. No one would use hydrogen, but the equation is the easiest. So putting in too much fuel or not enough fuel and having your ratio wrong tends to result in a slow burn instead of a fast explosion, theoretically less dangerous from an explosion standpoint, but more dangerous from a fire standpoint since it could burn for some time possibly setting something else on fire.

@phoenixmistertwo8815 8 месяцев назад

I did it with the Schrader valve off and I have no regrets. I saw that one video where dude leaves it in and keeps air on it, and it sucked in the tire as much as mine swelled. I didn't even use air, just spray and light with the valve wide open.

@nicholas_scott 5 лет назад

Viral? this method is as old as.... tires. It only works as an emergency method if you also have a ready source of pressurized air since the tire will likely pop back off its bead from the vacuum that develops. Also, they were using starter fluid not lighter fluid. Lighter fluid works, but is more critical to the air/fuel mix.

@nicholas_scott 5 лет назад

BeeP Official I know what viral is, just didn't realize people hadn't known about this. But I've owned 4x4s my whole life, so it may not be something car people are familiar with.

@sws212 5 лет назад

Known and old things go viral all the time. Every couple of months, there's a 80s or 90s clip or video that suddenly becomes popular if placed in the right context. This is no different.

@willbleedem5156 5 лет назад

Just something trendy to get views

@Susanjag51 5 лет назад

Nicholas Scott v.

@treball2982 5 лет назад

Stfu

@halfword 5 лет назад

I always knew fire solved everything

@kakikencing8390 5 лет назад

Can fire solve world hunger?

@Karlisvoth 5 лет назад

@@kakikencing8390 Welp. world hunger means people need food, right? Food is cooked, in order to cook you need... fire

@ProjectSonicRelase 5 лет назад

Fire = Thanos, there's your answer

@TechnicalAnam 5 лет назад

great

@krispykrep912 5 лет назад

What about nuclear fire?

@grampabadger 3 года назад

Had a tech do that, but he used way too much fluid. It caught the inside of the tire on fire just long enough to blow out after about 2 hours of driving. I had his boss look at the tire, which was MELTED inside. I got a new tire out of the deal and they don't do that any more.

@Bryan-Hensley 3 года назад

That's the whole problem with using this.

@benreed4918 3 года назад

No fire will burn inside a inflated tire! Fire needs oxygen!

@Bryan-Hensley 3 года назад

@@benreed4918 the air has oxygen. Then when you start adding air you are adding oxygen. It can keep burning

@benreed4918 3 года назад

@@Bryan-Hensley true!

@Bryan-Hensley 3 года назад

@@benreed4918 I've learned this the hard way. I used to have flats on our riding mower when I was young and I would do this to re seat the tire. The rim was wider than the tire so it was almost impossible to reseat without taking to a shop or this. But I burned one through using gas, which I shouldn't have used, but I was about 7 then.

@mixter7x7 5 лет назад

1:10 / 3:35 show the most accurate demonstrations. if you're going to do this - you must realize that almost as quickly as the tire is set on the bead - you must begin pressurizing it or the rapid cooling will vacuum the tire right back off the bead of the wheel.

@Kiflaam 2 года назад

what if I just take the valve core out, will that work?

@russg1801 5 лет назад

As another poster stated, it is Not "impossible" to inflate the tire without it being seated. Just get the beads against the inside shoulder and apply enough air volume. They remove the valve from the tire stem to get maximum pressure to overcome the temporary leakage. Pop! Pop! and it's on. Go by a tire shop and you hear that sound all day long.

@D.AverageJoe 5 лет назад

I work at a tire shop and I just put air in to seat it.. You can seat most beads with 10psi.

@Tyler-tn2dm 2 года назад

@@D.AverageJoe for real the hardest part is getting the tire on the rim setting the bead is easy

@melaniew77msn 5 лет назад

I always use starting fluid and I'm so old that I remember when you could buy regular ether in the aerosol cans. I don't think lighter fluid would be volatile enough to create the explosion needed to seat the beads

@AnjuIshanKarunarathna 5 лет назад

Perfectly matching for Tubeless tyres!!!

@gagewesterhouse9558 5 лет назад

Two problems with this. One; fire, as well as the explosion, can damage and/or skew a Tire Pressure Sensor. Two; the fire changes the chemical composition of the bead sealer.

@guaposinner 5 лет назад

Any other car guy just see this in their recommended 😂

@joshharrison1169 5 лет назад

lol i was lookin at stuff about putting 305s on and boom this popped up lol giving me ideas 🤔

@runeviking5770 5 лет назад

I like that I saw the video, now I can mount tires myself 😂😁

@thereluctantgearhead4544 3 года назад

Shit, I just exploded a tire on a rim yesterday.

@russelltech7691 5 лет назад

One of the oldest and best ways to do it if you can't get it to air up. We did this at are tire shop when I was younger. Alvarado Texas, it was Davidson tire company. Good video, brought back memories ✌

@timminh468 3 года назад

I forgot about this, now I just rewatched this videos and have a 💡 for my car’s tire. It has been flat and It fell out of the rim after I drove it onto my driveway while still flat. Been wondering how to put it back in. Thanks for the video.

@bremCZ 5 лет назад

"A tyre will be impossible to inflate until both beads are set..." What a load of bollocks. The inflation process is what is used to seat most beads.

@bryantzerrato8255 5 лет назад

yes you are right but the conditions must be exact at a high level of are so that you could inflated using it that's why we Mount are tires with special machines but if for any reason your bead gets knocked out while driving and you try to inflate it will be impossible because the bead is not properly seated

@Camilo19832001 5 лет назад

Shhh, dont tell the experts in the comments common sense

@bremCZ 5 лет назад

@@bryantzerrato8255 We mount the tyre with special machines but we still inflate them with a standard airline. Very few passenger tyre beads need any extra help seating. If your tyre happened to come unseated while on the car and suffered no damage you could happily seat it with a standard airline without removing it from the car.

@lord_matto8660 5 лет назад

Brem as a young guy that pretty new that meaning about 9 months I can fully back you up on that because of where I worked we had an agreement that the youngest person worked the tire machine and Indeed the machine itself is specialized to the process of removing and mounting tires but after the tire has been loosely fitter on the rim it doesn’t matter really matter what you use to set it fully as long as it’s some sort of compressor even truck tires don’t much more that’s why most tire machines are made so that if you press a bit harder on the pedal for the air it will send air out at each of the claws to give it a bit more umf when seating it I’ve mounted 100 of tires by now even as big as front wheel of a tractor and as long as you know how to force the air in you won’t need fire for any part of the process if you are in an equipped workshop and there is probably a good reason why it’s not the standard thing to do taking that even without fire there are hazards when inflating a non seated tire if you don’t keep track of where your fingers are and trust me I’ve seen it ones where a dude got his fingers stuck between the tire and rim and that shit both looked and sounded like it hurt like hell

@bugglemagnum6213 5 лет назад

Bryant Zerrato i thought i was having a stroke while reading this

@_EVANERV_ 5 лет назад

This method was first popularized by top Gear on their polar special back in 2007. It is one of the many tricks the Icelandic mechanics used to keep their car going till the north pole.

@marisagonzales5969 3 года назад

Thank you for sharing this information!! Always fun to learn something you didn't know about♡♡

@joshuabryant2530 5 лет назад

One of the most useful tricks to ever learn for trail riding

@CORYJOHNM 5 лет назад

You have to explain this to adults??! Mind Blown!

@gregdubya1993 5 лет назад

Look at this NEW VIRAL TIRE TREND (literally decades old)

@outlawjodiewales9295 5 лет назад

oldest trick in the book

@dino4812 3 года назад

tik tok in a nutshell

@blackamericanlesbianprofes4357 3 года назад

I see this in my RU-vid suggestions. Thank you for posting.

@arjindersingh7977 3 года назад

U explained it very well ❤.. Good work dude

@alexanderdesfosses 5 лет назад

Lighter fluid is never used it does not burn fast enough most of the time its brake clean or carb cleaner if the guy with the little stubby can was using a cintas Airfreshner

@C-64 5 лет назад

We used to use gasoline then threw a match at it I was always afraid my father would get his fingers caught when the tire exploded

@johnharris7751 3 года назад

Some guys use thier torches , same idea just different fuel source, myself I'm faint hearted and was sure glad when power blasters first came upon the scene .

@daltonbrink9924 3 года назад

I've always used starting fluid.

@Saint696Anger 2 года назад

@@daltonbrink9924 that worked good

@brianglade848 5 лет назад

My dad did this in the late 70s to his Mercury Zephyr at the office, blew the door off his office building

@danielpascalp 5 лет назад

Oof sorry to hear that but I'm laughing so hard 😂

@sergiocruz6195 3 года назад

Do you know if they used a lot of fluid

@ERiQTENDO Год назад

Thank you for making this video!

@cristianmontoya3149 Год назад

Thanks for the demonstration, you have made me understand why it worked : )

@jacksonpuckett6115 5 лет назад

I've only done this once or twice when in a timecrunch or the rims are the OLD split rim style. On a dump truck once, and it was a hell of a lot faster because you leave the wheel bolted to the axle, and just dismount old tire, mount new tire, use this trick to seat bead and inflate. Pretty nifty. Also used starting fluid not lighter fluid.

@bremCZ 5 лет назад

Why on earth would you do it on an old split rim? They were tube type.

@gagewesterhouse9558 5 лет назад

Know a guy who tried kerosene. Melted too much of the tire. And the TPMS.

@rossbrumby1957 3 года назад

I've seen it done on trucks with tubeless tyres but never on splits. How's that even possible?

@jacksonpuckett6115 3 года назад

Not all split rim are tube tires... The dump truck i mentioned had split rim and the tire did not have a tube.

@HR-wd6cw Год назад

@@gagewesterhouse9558 TPMS is probably why you would (or just shouldn't) do this on a modern vehicle tire rim, as most have TPMS (I think in the US, though, TPMS became a requirement on cars at least starting in 2010, so the cost to replace a TPMS transmitter probably costs more or as much as just paying someone to mount it or taking 5-10 minutes and doing this "by hand"). Getting the tire on the rim is probably the hardest part.

@xXShadowRejectsXx 5 лет назад

I've done this dozens of times. The joys of 22x14's and 40x15.50s. The easiest and safest way is to set the tire standing up vertically on it's own and then spray the beads with brake cleaner and pull back maybe 5 feet and use a lighter in front of the brake cleaner spray nozzle itself to act as a small flame thrower and shoot it towards the bead. Works almost every time the first try, and the tire does jump at you nor does the flame.

@charlespope8713 5 лет назад

THANKS !!

@garyhughes5558 4 года назад

Thank you for the explanation.

@iwarnedyou5999 5 лет назад

Works like a charm every time !

@Sheharyarjavaid 5 лет назад

This is the method used by newbies. Real men only use air pressure from them nozzle to get them in place. And it is used in emergency situations where you don't have access to pressurized air.

@antoniocordova1999 5 лет назад

You normally only do this for big tires like semi and construction tires.

@harryazzole7814 5 лет назад

@Kenny Argueta Ventura you literally proved his point.... Normally, as in yeah, the one farmer and half a dozen racers that also do it are part of the "unnormal" few that do it.

@garychristenson6370 5 лет назад

Great idea. Bigger tires, bigger rims, thicker steel. And when things go bad, much more likely to be lethal. Go for it, Bubba.

@BatBrakesBones 4 года назад

Excellent explanation and visual.

@killajr51 5 лет назад

Well thank you! I was wondering this exact thing not to long ago!

@swallowedinthesea11 5 лет назад

This is so beautiful, priceless, beatific, heartening, humbling, encouraging, precious, and inspiring! My body's riotously convulsing and I'm crying from everlasting joy as I type this at 47 WPM!

@DevinVtown 5 лет назад

That’s lit...

@Diddancing 5 лет назад

literally...

@cindi9935 5 лет назад

Heheehe *LIT* erally

@OmegaTryce 5 лет назад

*Literarily

@IbanBoi99 5 лет назад

Yeet

@Epic_Gamer__ 5 лет назад

OmegaTryce r/whoosh dumbass

@arifigo1006 5 лет назад

Wow, we learn new things every days

@markedwards3729 4 года назад

More often than not it doesn’t work. But when it does it’s a thing of beauty. And when you are in the position hat you need it, it may be worth trying if you can do it safely.

@RealKaukus 5 лет назад

Sometimes it's the ONLY way to get the tires on the rims properly... Some rim/tire combinations, often used in Motorsport or tuning scene, won't allow your mechanic a normal procedure

@stonecold6385 3 года назад

I've been back working on truck tires for 4 years. Haven't run into a single tire I couldn't air up yet. Used ether(starting fluid) regularly way back in the 80's. I'd get fired for it now lol.

@leredflame286 5 лет назад

People have been doing this for such a long time

@HeyItsAvi90 5 лет назад

Not a car guy. Never knew this until now. Im 29.

@indridcold8433 4 года назад

It was even done with the early tubeless motorcycle tyres.

@darwinawardcommittee 4 года назад

Indrid Cold It was done two weeks after the wheel was invented.

@Sussy-hotdog 4 года назад

@LeRedFlame Yes, People have been doing this for such a long time......and now we have the guys at Tech Insider (thank you) who explains it for us on RU-vid. How come you didn't do this video....be the guy to explain it to everyone else. Then you could be important and a big shot. But no...it didn't happen. Another missed opportunity in your life. Maybe you can learn from this.

@connork.2131 4 года назад

Should I do this with nice tires?

@withOsamaNatto 2 года назад

Thank you for explaining

@chinuvang6189 4 года назад

I’m going to try this tomorrow using Starter Fluid. How much fluid do I need in the wheel? Full 360 or just in one area?

@ryanbundy5502 5 лет назад

This is not the standard this is old school you'll think it's cool till that time blows up and splits your hand in half iv seen it in person so keep in mind there is a reason we don't do this anymore

@SahilP2648 5 лет назад

Well you can always expand the liquid trail wick and move out far away or hide behind something before it expands. Also how would this kind of a controlled explosion blow your hands off? Doesn't seem likely at all.

@ryanbundy5502 5 лет назад

Didn't say blow your hand off I said split your hand if it blows. anyways if the side wall is weak it can pop, split ,blow open and if Your not using the long air nozzle when you try to fill it for bead setting that rubber and wires will tear you hand up

@vipervidsgamingplus5723 5 лет назад

person I know was putting air in the tire of his bike something went wrong and the inner tube slipped past the bead and blew up next to his ear he was def for a couple minutes he got lucky his hearing wasnt worse off than what it was

@ryanbundy5502 5 лет назад

Sahil Pethe how can you hide when you have to get the air to in the tire before the bead falls of the rim

@ryanbundy5502 5 лет назад

No fire is ever controlled in an open space

@MikeEnIke007 3 года назад

Who figured this out? It like, "Hey my tire is flat so I'm just going to set it on fire and see what happens.........Oh!"

@jakemccoy 3 года назад

The originator pieced together what he/she knew about science. That's how inventions work.

@sethc4758 4 года назад

I just saw this in a gif on Facebook I had to learn more! This is fascinating

@teddysmith1083 2 года назад

Thank you always was curious

@glassid 5 лет назад

I can't wait for my next flat tire

@modzombieno.9029 5 лет назад

Lol

@joeylongchasen671 5 лет назад

Lol

@ebaiderrick 5 лет назад

Your wish would quickly come through if I was your neighbor

@TruckTaxiMoveIt 5 лет назад

Just because your tire is flat doesn't mean your beads are off more than likely your beads are not off so this method won't help you

@patchrat1 3 года назад

It’s not a safe practice but there’s times when it’s the only way to get it done I’ve done it before it works best if you hook up a air chuck first I use starting fluid and not a whole lot

@jevonmcpherson8054 3 года назад

could you please provide an explanation why it isnt safe.

@jxsxph8671 3 года назад

@@jevonmcpherson8054 yes please

@patchrat1 3 года назад

Jevon Mcpherson the tire could come apart and do great bodily harm is the worst thing that can go wrong

@LeandroCasasBandLeader 8 месяцев назад

Great video! Thanks!

@streetjustices1706 4 года назад

I just learned something new today, awesome.

@russg1801 5 лет назад

The ether-and-match trick is a common Third World technique for mounting tires. At tire shops they use a "Cheater" charged with high pressure - a lot safer, but still hard on the EAR DRUMS!

@eduardodominguez835 5 лет назад

Oldest trick in the book

@C4H10N4O2 4 года назад

Not as old as tires though, for a long time tubeless didn't existed

@Sussy-hotdog 4 года назад

Who taught you the trick. Once upon a time....you didn't know it. Someone had to teach it to you. You were the student. A blank slate. How did you feel when you learned how to do this.....because the person who showed you how.....knew more than you. They were smarter than you. Did you feel inadequate? You should.

@felixrodriguez1118 4 года назад

What do you call this Old Trick Sir? Thanks

@drekyb1855 5 лет назад

I always wondered how this worked thanks

@JanHoellwarth 10 месяцев назад

Very well-made video!

@dillongreen7001 5 лет назад

This is oldschool now days they use blast air tanks

@juanfranciscobretado1039 5 лет назад

Stingyman method!

@johnharris7751 3 года назад

Air blasters to me are worth thier weight in gold.

@rossbrumby1957 3 года назад

Great when you've got one, unfortunately I've never had access to one- but only ever needed to do this trick once on a Bobcat tyre. Quick and easy though.

@funny-video-YouTube-channel 5 лет назад

Wonderful invention. This idea is *spreading on the Internet like fire.* Imagine what kind of ideas will come in the future. We might see inventions and ideas that are like magic from our current perspective.

@HostileLemons 5 лет назад

Lol this method isn't new. It's been around for at least 100 years

@madjackgamingandfitness498 5 лет назад

It's a very old method and I would not recommend people try this who have 0 experience in the field.

@lisam4013 Год назад

Thanks and God bless you for your helpful how to...video.

@JesusSaves86AB 3 года назад

That third rim (3 spoke) is a Primax, had a set of those from '99. Man I wish I still had em, put them on a 98 Regal GS I sold, miss the car too.

@gamblemadman 4 года назад

"This is also known as an explosion"

@kenpowell3546 5 лет назад

Done this a thousand times only lost my eye brows once lol

@CHEESER7 5 лет назад

How

@1986Honda4trax 4 года назад

MeMefied Cheese the flame probably hit his eye brows and burned them of

@r8alvar 3 года назад

In case someone out there wondering if this will work for popping out dents. It will only work if your windows are rolled up. If you take this seriously you deserve what will follow.

@sagarsolanki8983 5 лет назад

My friend solved his grandmother's problem with fire. Another great use of fire!!!

@MichaelJayValueInvesting 5 лет назад

So is this now a standard practice for auto repair centers?

@freaky354 5 лет назад

do you think this will damage the tire in any way?

@GojosBackHand 5 лет назад

Naw this is a old school method

@ryt6940 5 лет назад

Mark Gaming YT2 fire burns the rubber, lowering it's condition. That's why most of these prople go balls to the wall to put the fire out, so it doesn't lower the condition of the tire.

@TechnicalAnam 5 лет назад

@RNCHFND 5 лет назад

In the instagram stories era, this counts as "hardcore" marketing. Most people don't know that this is old-school

@ay3514 5 лет назад

Could have been a short video Slow mo

@Murphys_Law9 5 лет назад

A Y could of been a long comment

@phoenixmistertwo8815 8 месяцев назад

I just finally tried this on a stubborn bead, 16-inch rim, and it worked perfectly the 2nd time. I used to little starter spray the first time, and too much the 2nd, but it beaded both sides with no issue and even swelled the tire despite having the Schrader valve off which I removed so it could vent better. Thing is, one doesn't need any air nozzle, or need to spray inside the tire, just a quick spray at the bead all around and overspray the sidewalk a bit so you can light it. If Schrader valve removed, it will swell when it seats as if it has like 60 PSI on there suddenly, and the open valve will expell all that gas since you want fresh air for the filling instead of exhaust fumes from the combustion. I've seen one person keep the Schrader valve in, and they applied air at the same time, and in turn, when it seated, it created a huge suction. I don't think doing it that way is the best idea, and the air nozzle feeding is not needed if you remove the Schrader valve.

@k.r.v.4219 5 лет назад

I was shown this truck back 48 years ago by the mechanic at my Fathers trucking company! Yes back as a teen I learned the company business from the very bottom! In the garage as a grease monkey! I was shown how to get a truck tire back in the wheel and seat the bead, using either based starting fluid. Just spray a small amount and quickly throw a match inside the tire. The gas ignites and expands so quickly he tire just pops right back with a sealed bead! You should have seen the faces on an excavation crew I worked with as a dump truck driver the day a fellow driver had a low tire get its bead popped off! When I sprayed the starter fluid and came out with a pack of matches and fixed it the look in their faces was priceless!!!

@clayc9221 5 лет назад

song name at end?

@audreyzac4890 5 лет назад

This please. Anyone?

@joaofreitas8724 5 лет назад

@Ks_World007 2 года назад

Pls, we need it

@joshhayl7459 5 лет назад

🔵 It's important to realize that if you use this method whatever amount of flammable solvent that is left trapped in the tire will accelerate the deterioration of the tire internally a good deal faster than atmospheric air, and can certainly compromise the Integrity of the tire over a MUCH shorter time.

@DontSleepOnEm 4 года назад

*The most beautiful tire video ever.*

@johnryangranada8026 5 лет назад

Learned something cool today ^-^

@tor-wr1re 5 лет назад

I hope these people realize this has been going on for a long time. Probably since easily the 40s or 50s where i come from

@spoton8108 5 лет назад

Lightning mcqueen shouldve used this in the first movie

@heyimgayalso6129 5 лет назад

sawega binarung **fingers have left the game**

@Livereater 5 лет назад

great video!

@rickobrien4025 3 года назад

I saw this particular deal on "ice Road Truckers" and was wondering if it would be on YT . and it is ...

@Skyler_. 5 лет назад

*_"And, hopefully your first destination isn't a hospital"_*

@KokoroKatsura 5 лет назад

a n i m e n i m e

@RayMak 5 лет назад

This is too amazing. What if the tyre explode?!

@Theo-cc9nt 5 лет назад

I see you everywhere! 😃

@ebaiderrick 5 лет назад

Then you got an exploded Tyre😂

@adkinsy85 5 лет назад

Then the mind explodes 🤯

@rossbrumby1957 3 года назад

It's not a strong enough explosion, in fact, if you don't start pumping the tyre up with air straight away afterwards, the air inside cools and contracts which sucks the beads off the rim and you must start all over again.

@son-fq3nz 3 года назад

most illegal thing I will see in this year, HOW DO YOU ONLY HAVE TWENTY LIKES MY GUY LMAO

@jaimecortez1199 5 лет назад

This is so fun to do I’ve worked at Victor’s tires and big o tires where I done this haha

@dickturpin6258 3 года назад

This was well explained. It is a controlled explosion, A sweet science.

@descent8275 5 лет назад

I use brake cleaner. works just fine!

@SouthernMechanic 5 лет назад

Starting fluid aka ether not lighter fluid

@Inidentificado 5 лет назад

A minor note at 3:30, the gas does stay there, its volume just decreases as it cools off.

@YStoriesDotCom 2 года назад

Lovely video 👍

@davidramirez6896 5 лет назад

3:28 explain it correctly my guy. You need the valve off so it can expel extra pressure and needs to be screwed in after the seal, and filled to the psi needed. This is half ass

@uss_04 5 лет назад

Personally, I dont like doing tricks like this unless I understand the principal behind it, and more importantly, what can go wrong. And isnt it more of a deflagration, since the gas expansion is subsonic?

@willhemwill5595 5 лет назад

If the tire burn away rapidly, why would anyone use this trick ? They only set in on fire for a short time and Tires is thick, like real thick

@uss_04 5 лет назад

Not enough heat is transferred to the tire material in the short time to let it ignite. On the other hand if the tire was shredded up in fine bits, and then heated, it would possibly light on fire. Personally, id be concerned if there were solvents in the fluid that might degrade the materials over time. Not every ignitable fluid would be good for the job, but in a pinch, beggars cant be choosers.

@negativeindustrial 5 лет назад

Another guy and I had to do this to all four tires on the side of the highway at midnight on my MR2 Turbo last year. Didn’t take as long as you think. I had one tire on my 10” wide rears that didn’t want to cooperate.

@topimam69 4 года назад

Thanks!! it works great

@connoisseuroftigolbitts 5 лет назад

Starter Fluid is used not lighter fluid

@jhayar15 5 лет назад

the tires doesn't have interior?

@projectcerebus 5 лет назад

that's what im thinking- if they did that -isn't it the interior would also get burn?

@tatotiteta 5 лет назад

what do you mean interior? you mean tube?

@jhayar15 5 лет назад

i think thats a different type of tire because the one the i usually recognize is the one with donut shaped rubber inside called interior, but that one doesn't have an interior inside, the tire is the one containing the air, i saw that kind of tire once

@mr.2minutes161 5 лет назад

This is for tubeless tire bud. if it got a tube inside, it'll sit on its own when you fill it.

@steve5912 5 лет назад

@@jhayar15 Its called a tube lmao

@Desert10075 2 года назад

I use to fix tires and I'd use starting fluid and a lighter to seal a stubborn bead. Fun but you need to keep your fingers in the clear if you don't as it seals you could loose a finger tip.

@xkeepersvk 5 лет назад

What I would like to know is how much actual tire pressure can you create by this method.

@gusargoan 5 лет назад

I did it in the 70's, it's not new.

@knerf999 5 лет назад

Whoa, i thought car tires were like bicycle tires.

@RNCHFND 5 лет назад

They were in the past

@bremCZ 5 лет назад

They are.

@tatotiteta 5 лет назад

they were in the past(2)

@Tjspycorp 5 лет назад

Brem I don’t know of a single modern car that uses tubes in their tires

@bremCZ 5 лет назад

@@Tjspycorp But there are plenty of tubeless bike tyres these days.

@shabbirocks123 3 года назад

Just for GK if got a flat tire in middle of desert on the way and this technique is used how long will it hold?

@oratiog9036 5 лет назад

We did this twice with petrol whilst on safari in very remote areas. Although we carry 2 spares, shit sometimes happens and our pumps don't have enough pressure. Either you do this or sit there for week(s) (hope your food and water last).