Тёмный
No video :(

Scratchbuilding the Sheridan Hotel Part 3: The Basic Building Shell 

HO Scale Rio Grande in the San Luis Valley
Подписаться 1,5 тыс.
Просмотров 843
50% 1

Links to items mentioned in this video. (Note: I am NOT endorsing any particular product(s), nor am I compensated by or connected to any of the companies mentioned.) I do NOT guarantee that these links will give you the best available price! Consider these links to be a starting point for your search.
Front Wall Lower Windows: Tichy #8308 www.tichytrain... You’ll need 2 windows; since they come in a pack of 12, you’ll have ten left over.
Small Windows: Tichy #8107 www.tichytrain... You’ll need 4 of these windows; since they come in a pack of 12, you’ll have eight left over.
Remaining Windows: Tichy #8052 www.tichytrain... You’ll need 17 of these windows; since they come in a pack of 12, you’ll need to buy two packs, and you’ll have seven left over.
Ground Floor Doors: Tichy #8191 www.tichytrain... You’ll need 3 of these doors, and they come in a pack of 3.
Balcony Door: Tichy #8116 www.tichytrain... You’ll need just one of these; they come in a pack of 3.
Monster Modelworks 1/32” brick sheet: larkspurlasera... Monster Modelworks offers five different styles of brick, and they all come in several thicknesses, including 1/32”. You can buy either 4 inch or 6 inch wide sheets, depending on you project needs.
Tamiya 6mm Masking Tape: www.amazon.com...
#11 Blades Bulk Pack (X-Acto, box of 100): www.amazon.com...
#11 Blades Bulk Pack (NicPro 240 pack): www.amazon.com...
Monster Modelworks Brick Lintels: larkspurlasera... These are listed as 0.50” diameter, but I cannot find a single dimension on these lintels that could be construed as 0.5” diameter. You’ll use the smaller width lintels (the larger lintels have a much larger bottom radius, so they won’t match the smaller lintels.) There are 12 small lintels in each package, and you’ll need a total of 27, so buy three packs.
Plastic Spring Clamps: www.harborfrei... These cost about 25 cents each. Alternately, you can buy very similar clamps from MicroMark for about 40 cents each.
Monster Modelworks Brick Corners: larkspurlasera... Be sure to get the brick style which matches your brick sheet. Each package contains four corners, so you need just one package.
True Sander by Northwest Short Line: nwsl.com/colle... This tool retails for $44; MicroMark sells a similar tool for $38: www.micromark....
-----------------------------------------------------------------------------------------------------------------------
This video was edited using Shotcut for Linux. Video footage and still images were recorded using a Galaxy A10e phone and a Nikon D7100 camera.

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 8   
@craiglowrey9550
@craiglowrey9550 11 месяцев назад
Beautifully done...
@OldcampRanch
@OldcampRanch 11 месяцев назад
Well done 👍🏻
@williambryant5946
@williambryant5946 11 месяцев назад
Looks really good! 👍
@ricsrails
@ricsrails 10 месяцев назад
Very nice. Our friend Luce sent me your link. You are doing a great job. I especially liked the video on the tank car upgrade that explained the brake system.
@rwissbaum9849
@rwissbaum9849 10 месяцев назад
Thank you so much!
@williambryant5946
@williambryant5946 11 месяцев назад
Pikestuff makes a plastic terracotta tile cap strip to go on tops of walls where you put on the sand texture to simulate it being finished with mortar. A lot of older brick buildings have terracotta tile to finish/cap the top of walls. Just a tip if you have any buildings you're gonna model that might need that detail. That is if you didn't know already. You could use that sand texture to paint a piece of square balsa wood to represent a cast concrete cap on top the wall too. 👍
@rwissbaum9849
@rwissbaum9849 11 месяцев назад
Thanks for the tips. Monster Modelworks also makes a tile cornice strip in a couple of different widths. I tried these and thought the look was a little too formal. I'm modeling south central Colorado, and most of those buildings are finished informally. Thanks for watching!
@williambryant5946
@williambryant5946 11 месяцев назад
@@rwissbaum9849 Yeah the area I'm modeling, 1930s-40s small towns in NC; doesn't even have the fancy brickwork on the top of the front walls. All most have is that tile on top of straight flat walls. Very informal and just the basics I guess you can say. I'll have to check out the tile cap strip from monster modelworks and see how it compares because there's a lot of buildings I'm gonna have to scratch build just as you are. 👍
Далее
Replacing a Missing Freight Car Underframe
14:49
Просмотров 1,7 тыс.
拉了好大一坨#斗罗大陆#唐三小舞#小丑
00:11
СЕРЕГА ПИРАТ - TEAM SPIRIT
02:37
Просмотров 292 тыс.
Smoke 😱
00:26
Просмотров 1 млн
Adam Savage Demonstrates Miniature Spaceship Paneling!
29:22
Upgrading Walthers Mainline Passenger Cars
15:28
Просмотров 1,1 тыс.
Building Downtown Deco's Classic American Block
27:57
Refurbishing an Inexpensive Passenger Car
15:22
Просмотров 8 тыс.
Damascus Japanese knife from Ball Bearings
21:04
Просмотров 17 тыс.
What Is It For?
9:57
Просмотров 267 тыс.